Philips TD9137T/194, TD9137Z/16, TD9137T/30, TD9137T/19, TD9137T/16 User Manual
...
Thank you for buying this telephone system. Your telephone is equipped
with convenient features such as full-handsfree conversation, 24-non-volatile
memories and a 10-digit LCD-display which indicates:
• the numbers entered during dialling
• the buttons entered during programming such as:
the call timer icon
the store icon
the ring indicator icon
the mute icon
the handsfree operation icon
In the package you will find the following:
• one base unit
• one handset
• one coiled cord
• one telephone line cord
• one user manual
Description of Features
1. Display
2. Memory buttons
3. Store button
4. Recall button
5. Mute button
6. Redial/Pause button
7. Microphone
8. Dialling keypad
9. Shift button
10.
Volume adjust buttons
11.
Speaker button
Installing Your Telephone
Setting the Dialling Mode
Set your dialling mode to either Tone or Pulse depending on which dialling
system is used. To test if the dialling mode works, dial a digit. If dialling tone is
still heard, you have to change to the other dialling mode.
Setting the Ringer Volume
Adjust your ringer volume by doing the following.
Setting the Ringer Melody
Adjust your ringer melody by doing the following. Press .
Setting the Recall Mode
Set your recall mode to either Time Break Recall(TBR) mode or Earth Leg
Recall(ELR) mode. If in doubt, contact your network operator.
GEBRUIKSAANWIJZING
™
skip 300
•
•
•
•
•
Volledig handvrije werking
24 geheugens
Groot LCD-scherm met
telefoontimer
Progressief rinkelen
1
R
Bis
M9
M10
M12
9
M1
M2
M3
M4
M5
M6
M7
M8
1
2
3
4
5
6
7
8
M11
10
11
12
2
5
8
0
4
7
3
6
9
1
1
2
9
10
11
78
6
5
4
3
Setting the TBR (Flash) Time
Set your TBR (Flash) time according to the specification of your exchange, if in
doubt, contact your network operator.
You have 3 TBR time choices: 100 ms, 270 ms or 600 ms
The Memory Feature
Your phone can store up to 24 telephone numbers. 12 are stored under memory
locations marked M1...M12, while the remaining 12 under
1
...
12
To store telephone numbers into memory locations M1... M12:
To store telephone numbers into memory locations
1
... 12 :
Note: A telephone number may not consist of more than 32 digits including
pauses, and the buttons
and , otherwise, it cannot be stored under
one memory location.
Some telephones might need to wait for a second dialling tone in order
to dial the stored memory; in this case, insert a pause wherever necessary
by pressing
, if the pause is not long enough, extend the pause duration by pressing
two to three times.
Connect the telephone line cord
Connect the handset coiled cord
100 ms 270 ms 600 ms
The dial tone
should stop
A long beep
and the dial tone
will be heard
1
M9
M10
M12
9
M1
M2
M3
M4
M5
M6
M7
M8
1
2
3
4
5
6
7
8
M11
10
11
12
...
1
M9
M10
M12
M1
M2
M3
M4
M5
M6
M7
M8
M11
Select memory location button.
A long beep and the dial tone will be heard
Dial the telephone numberThe dial tone
should stop
...
0
9
1
9
1
2
3
4
5
6
7
8
10
11
12
Dial the
telephone number
The dial tone
should stop
Select memory location button.
A long beep and the dial tone will be heard
of
The dial tone
should stop
Press 1 for Pulse mode
or 2 for the Tone mode
A long beep and
the dial tone will
be heard
or
The dial tone
should stop
The phone will
start ringing
The phone will
stop ringing
or
The phone will
stop ringing
The dial tone
should stop
The phone will
start ringing
The dial tone
should stop
TBR mode
ELR mode
A long beep and
the dial tone will
be heard.
Erasing Memories
Receiving Incoming Calls
The ring indicator icon will blink when the phone rings. Pick up the handset or
press to receive the call. To adjust the handset or speaker volume during
conversation, press repeatedly or ...
Making Calls
Make a call either by manual or memory dialling. The buttons entered can be
seen through the display.
Manual dialling
Memory dialling
For memories stored in ... , press Shif
and ... . A long beep and the dial tone will be heard.
1
3
4
1
M9
M10
M12
M1
M2
M3
M4
M5
M6
M7
M8
M11
1
9
1
2
3
4
5
6
7
8
10
11
12
of
1
M9
M10
M12
M1
M2
M3
M4
M5
M6
M7
M8
M11
1
9
1
2
3
4
5
6
7
8
10
11
12
The Mute Feature
This feature is used during phone conversation in order for you to talk in private to
somebody else without the person on the other line hearing.
• Press to turn the microphone off.
• Press to resume conversation.
The call Timer Feature
When receiving an incoming call, the conversation time will start automatically.
When making a call, the conversation time will be shown on the display 10
seconds after the telephone number is entered.
-
>The and the conversation time will be shown on the display.
Terminating the call will stop the call timer automatically.
-
>The total conversation time will remain displayed for around 5 seconds.
The , , and [R] (Flash) Buttons
These buttons can be used for special public or private exchange service functions.
Please consult your network operator for further details concerning the network
services provided.
The Last Number Redial Feature
The last number dialled will be stored automatically until future replacement.
To redial the number:
Chain Dialling
In order to dial 2 or more telephone numbers consecutively, press the next
memory button immediately after the first telephone number has been dialled.
Mixed Mode Dialling
If the telephone is set to pulse dialling mode, pressing will send the next digits
in tone mode. The tone mode makes it possible to access public services such as
telephone banking. After hanging up, the telephone will automatically reset back
to pulse dialling mode.
Handsfree Conversation
During conversation, you can switch from handset to handsfree conversation,
i.e. using the speaker microphone.
The Listening-In Feature
This feature allows handset conversation and listening-in at the same time. During
handset conversation, press
. To end only listening-in, press . To end the
entire call, replace the handset.
The dial tone
should stop
12
12
1
1
For memories stored in M1...M12, press M1...M12.
...
of
Dial the telephone number.
Lift the handset
or press Speaker.
or
or
Lift the handset
or press Speaker.
To dial memories stored in M1...M12, press M1...M12.
1
12
of
Note: The telephone number can only be redialled if it consists of not more than 32 digits.
Redial/Pause is the first button pressed after you take the line. If other buttons are
pressed first, the previous telephone number will be replaced.
lift the handset
or press Speaker,
press Redial/Pause.
or
of
Press and hold
the Speaker
Replace the handset
Release the Speaker
Press [+] or [-] to adjust
to the desirable volume.
To terminate the
conversation.
Note: To switch from handsfree to handset conversation, lift the hand set.
or
1
12
1
1
To dial memories stored in ... ,
press and ... .
Philips Consumer Help Desk
Unit 4, Elmwood, Chineham Business Park,
Crockford Lane, Basingstoke, Hampshier
RG24 BWG, United Kingdom.
Phone :0645 282828
Fax :01256 707335
Loading...