Philips TD6850, TD6820/AH051P, TD6820/AG301P, TD6820/AG191P, TD6820 User Manual

Safety information

This product may be used legally only in a country where the appropriate
authority has given its specific authorisation. This authorisation appears
on a label at the back of the charger.
The marking on the product certifies its conformity with the technical
regulations for user safety and electromagnetic disturbance which were
applicable on the date of approval in accordance with European Union
Directive No. N°91/263/EEC.

Power requirements

This product requires an electrical supply of 230 volts, alternating
monophased current, excluding IT installations defined in standard
EN 60-950.

Warning:

The electrical network is classified as excessive according to criteria in the
standard EN41-003.
The only way to power down this product is by unplugging the power cable
from the electrical outlet. Make sure the electrical outlet is located close to
the apparatus and is always easily accessible.
It is recommended that this telephone be used as a complement to
another telephone which does not require mains power.

Telephone connection

The voltage on this network is classified as TNV (Telecommunication
Network Voltages, as defined in the standard EN 41-003).

Safety precautions

•

Do not allow the handset to come into contact with water.

•

Do not open the handset or the charger. This could expose you
to high voltages. Contact our after-sales service for all repairs.

•

Do not allow the charging contacts or the battery to come into
contact with conductive materials such as keys, paper clips,
rings, bracelets, etc.

Contents

Introduction 2
Installing your extra handset 3

Deciding where to put the charger 3
Installing the charger on a horizontal surface 3
Mounting the charger on a wall 5
Charging your handset 6
Subscribing your handset to your Xalio base station 7

Using your Xalio 9

Making an outside call 9
Answering an outside call 9
Making an internal call 10
Answering an internal call 10
Using the handset loudspeaker 10
Setting up Baby Sit (Xalio 6820 & 6850 only) 11
Transferring calls 12
Switching on the battery saver 13
Switching off the battery saver 13

Maintenance 14

Changing the battery 14
Caring for your handset 15

Contents 1

Introduction

Xalio 6800

The
telephone.

Xalio 6820

The
cordless telephone.

Xalio 6850

The
cordless telephone with answering machine.

Your Xalio 6800/6820/6850 comprises:

• a charger

• a handset

• a power cable

This guide shows you how to install and use your extra Xalio
handset.

Please refer to the corresponding Xalio user manual for
information on:

• using the phonebook

• using the emergency number

• using the answering machine (Xalio Vox only)

• troubleshooting

is an extra handset for the Xalio digital cordless

is an extra handset for the Xalio Plus digital

is an extra handset for the Xalio Vox digital

Introduction2

Installing your extra handset

Deciding where to put the charger

• Place the charger near a mains outlet supplying 230V at 50Hz.

• To reduce to a minimum any interference with other electronic

devices such as telephones, televisions, screens, etc. we
advise you to place your charger at least 50cm from any other
electronic device.

• Place the charger on a flat surface as with the base station or

mount it on a wall.

• Significant obstacles such as concrete walls or metallic

supports (windows and door frames, partitions, etc.) will lessen
the communication range between the base station and the
handset.

Installing the charger on a horizontal surface

Plug the power cable into the charger.

1

Installing your extra handset 3

Plug the power cable into the wall socket.

2

Place the handset in the charger.

3

Installing your extra handset4