Philips TD6731/BB051P, TD6731, TD6031 User Manual
Handset display
The display gives information about the operation of your telephone.
The meaning of the icons is the following :
The battery is currently charging.
The battery is full.
The battery is low. Please charge.
The handset has no battery power left. Please charge for
24 hours.
The handset receives an incoming call.
There is a call in progress.
The handset is within range of the base station.
The handset is out of range. Move closer to the base station.
The handset has no battery power left. Please charge for
24 hours.
The Xalio 200 is in programming mode. A programming
operation is in progress.
The network has sent a message notification.
A call transfer is in progress.
Access to the phonebook function is in progress.
1
Contents
Xalio 200 handset
Handset display 1
Installing the Xalio 200 3
Using the Xalio 200 5
To answer a call 5
To end a call 5
To make an external call 5
Preparatory dialling 5
To store an entry in the
phonebook 6
To make a call from the
phonebook 6
To view the phonebook entries 6
To delete an entry 7
To call the last number
called (Redial) 7
To call back last caller 7
To transfer a call between two
handsets (Xalio 200 Duo only) 7
Programming the Xalio 200 8
To set the ringer melody 8
To set the ringer volume 8
To change the earpiece volume 9
To select Caller Display type 9
To select tone dialling 9
To select pulse dialling 10
To select the pulse duration of
the R key 10
To clear the message network
indication 10
Notes 10
International guarantee 11
Environment & Safety 12
Troubleshooting
2
Installing the Xalio 200
PLEASE CHARGE THE XALIO 200 FOR
24 HOURS BEFORE USE.
Unpacking your Xalio 200
If anything is missing, please contact your place of purchase
immediately.
One Xalio 200 base station
One Xalio 200 handset
One power supply for the base station
One telephone line cord
One 2/3 AAX2 Ni-Cd battery pack
One user guide
DEF
ABC
MNO
GHI
JKL
PQRS
WXYZ
TUV
#
R
PHILIPS
2,4 V
DEF
ABC
MNO
GHI
JKL
PQRS
TUV
3
Setting up your Xalio 200
1
Plug the power
supply cable into the
power socket on the
underside of your base.
2
Plug the telephone
line cord into the
line socket on the
underside of your base.
3
Plug the power supply
unit into the wall socket
4
Plug the telephone line
cord into the wall socket
5
Open the battery door
on the handset
6
Connect the battery
pack to the connector
inside the handset
7
Close the battery door
1
2
3
4
5
6
PHILIPS
PHILIPS
2,4 V
7
PHILIPS
2,4 V
2,4 V
8
Put the handset on
8
24
the base and charge for
24 hours before use.
4
Loading...