TCS398
Mounting instruction 安装说明
Housing (Type)
功率/型号
36W (TL-D) 1310
58W (TL-D)
28/54W (TL-5)
35/49W (TL-5)
Length A
长度(mm)
1610
1258
1558
indoor
Cable Suspension B
悬吊安装孔距(mm)
A
B
C
1240
1540
1188
1488
Surface Mounting D
吸顶安装孔距(mm)
1263
1563
1211
1511
4441 000 63401a
Pole Fixing C
吊杆间距(mm)
600
600
600
600
83
TCS398 Suspension Mounting
using unit of ZPH 300 US
TCS398 悬吊式安装，
应用配件 ZPH 300 US
D
1 2
43 5
120
195
Philips Lighting Luminaires (Shanghai) Co., Ltd.
Address: No. 2688, Huyi Road, Jiading, Shanghai, China
Postalcode: 201801
飞利浦灯具（上海）有限公司
地址：中国上海市嘉定区马陆镇沪宜公路2688号
邮编：201801
Surface Mounting
TCS398 吸顶安装
2
The distance of surface
mounting refer to D
吸顶安装距离参考D
Note: For type (TCS398 xxx xxx A) version the mounting way is only suitable for pole fixing.
注意：对于型号为(TCS398 xxx xxx A)的非对称配光灯具，仅适用吊杆安装。
TCS398 Pole mounting way
using the unit of ZPS398 CB-S
TCS398吊杆安装方式，
应用配件ZPS398 CB-S
1
D
3
C
Pole
1
Fixing the pole to
ceiling surface
将吊杆安装到顶部
4
600
A
2
a
b
c
3
b
a
Pole mounting unit:
ZPS398 CB-S
吊杆安装配件：
ZPS398 CB-S
12NC:
9104 033 13880
Note: Normally the pole not provided by Philips.
注意：吊杆客户自备。
Continute ( link) installation TCS398 连续安装
E
D
Housing (Type)
功率/型号
36W (TL-D) 1283
58W (TL-D)
28/54W (TL-5)
35/49W (TL-5)
1 3
Cable Suspending E
吊绳安装间距(mm)
1583
1232
1532
2
Cable Suspending F
吊绳安装间距(mm)
1328
1638
1276
1576
F
65
110
Surface Mounting D
吸顶安装孔距(mm)
1263
1563
1211
1511
65
Continute installation
unit: ZPS398 CP-S
连续安装配件：
ZPS398 CP-S
12NC:
9104 033 13680
Suspension installation unit ZPH300 US 悬吊配件 12NC: 9104 033 01880
1
G
Loading
承重
8Kg Max.8Kg Max.
2
Suspension dimension G refer to B, E, F
安装间距G参照尺寸B,E,F
3
4 5
1. The luminaire shall be installed by a qualitied electrican and wired in accordance with the latest IEE electrical regulations or the national requirements.
灯具应由有资格的电工安装，接线要符合IEE电气标准或国家标准。
2. The luminaire shall, under no circumstance, be covered with thermal insulation matting or similar material.
在任何情况下灯具都不能被隔热或类似材料覆盖。
3. Please shut off power supply before changing lamp.
更换光源时请切断电源。
Loading...