Philips TC8276 User Manual

TC8276 Series
®
VidQuad
Selectable Quad/Full Screen Display
n
n
Two Monitor Outputs
n
n
n
n
Sequence Capability
n
n
Alarm, Freeze, and Video Loss
n
n
Functions No External Synchronization
n
n
Video Processors
R
R
The TC8276 Series video processors digitally capture t he full video from four sources, reduces these images to quarter-screen size, and combines them to provide a quad display. The TC8276 Series will accept both monochrome or color inputs. The output will be a monochrome quad display. Any color inputs will display color in the full screen mode.
The TC8276 accepts inputs from any EIA, RS-170 525 line, 2:1 interlaced source. The TC8276X accepts inputs from any PAL, CCIR 625 line, 2:1 interlaced source. These units w ill accep t inputs having video signals in the range of 0.5 Vp-p t o 2.0 Vp-p. These units pr ovide tw o monitor outputs. The QUAD VIDEO OUT displays a continuous quad display or a digitally-zoomed frozen screen. The VIDEO O UT displays the quad presentation or any of the four video outputs full scr een. The VIDEO OUT also displays a numeric on-screen camera identifier. Automatic gain and level circuits provide balanced brightness and contrast in all quadrants. The TC8276 Series achieve a real time update rate (30 frames-per­second) when used with line-locked cameras that have a phase error of less than 5 degrees.
Front panel controls allow manual operation for full screen video or four quadrant display on the monitor. These displays can be sequenced at a fixed tw o second dwell. If s elected, the quad display can be included in the sequence.
Alarm contacts enable remote call up of any of the four camera inputs on the VIDEO OUT monitor, and freeze the quadrants on the QUAD VIDEO OUT monitor. Flashing on screen "ALARM" indicates cameras in alarm.
An alarm output is provided for control of a VCR or other alarm activated devices. Front panel push buttons "freeze" the current picture in any quadrant for further inspection. Flashing on-screen indicators identify frozen quads. The frozen quadrant can be "zoomed" to a full screen display.
Specifications
Electrical
Model Rated Voltage Nominal No. Voltage Range Power
TC8276 120 VAC, 50/60 Hz 105 to 130 9 W TC8276X 220-240 VAC, 50/60 Hz 198 to 264 9 W
1. At rated voltage.
Synchronization:
No external synchronization required. TC8276: 525 line, 60 Hz. EIA RS-170, NTSC system compatible. TC8276X: 625 line, 50 Hz. CCIR, PAL system
compatible.
Digital Memory:
8 bit, 256 grey steps. TC8276: 512 H x 484 V. TC8276X: 512 H x 576 V.
Controls & Indicators:
FULL VIEW: Four push buttons with LEDs. Select full
screen presentation of inputs 1, 2, 3, or 4.
FREEZE: Four push buttons with LEDs. Freeze
quadrant s 1, 2, 3, or 4. Flashing on-screen indicator (FRZ) identifies frozen quads.
QUAD: O ne push button with LED. Selects quad display
of inputs 1, 2, 3, and 4.
SEQUENCE: One push button. Starts/Stops full screen
sequencing. Corresponding full-view camera LED will light.
1
Connectors:
VIDEO INPUTS: Eight looping BNCs with HiZ/75
switches. Accepts 0.5 Vp-p to 2.0 Vp-p composite video, sync negative, 2:1 interlaced.
VIDEO OUTPUTS: Two. 75 . BNC:
QUAD VIDEO OUT: Continuous quad presentation of
the four inputs, or a digitally zoomed quadrant. Inputs are blanked to alert operator to absence of video.
VIDEO OUT: The quad presentation, or any one of
four video inputs, full-screen, controlled via fr ont panel and/or over-riding full-screen alarmed input(s).
ALARM/ACCESSORY Input/Output: 15-pin connector.
ALARM INPUTS: Four. Accepts momentary or
continuous closures to ground.
ALARM OUTPUT: Isolated relay, normally open
contacts, closes upon alarm input. The relay contacts can handle up to 0. 5 A at 20 VAC/VDC (up to 36 volts peak from either pin of relay to ground), and a maximum resistive load of 10 VA.
REMOTE CONTROL INPUT: Accepts contact
closures to provide remote control of quad display and the freeze function.
VIDEO LOSS OUTPUT: Logic level low on video
loss.
Power Cord: 3-wire with grounded plug; 1.8 m (6 ft).
TC8276: NEMA 5-15P/C22.2, No. 42 plug. TC8276X: CEE 7/7 plug.
Mechanical
Environmental
Temperature:
Operating: 0 °C to +40 °C (32 °F to +104 °F). Storage: -40 °C to +60 °C (-40 °F to +140 °F).
Humidity: 10% to 90% relative, noncondensing. Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz. Shock: 50 g, 11 ms, 1/2 sine.
Options
TC8101MK Rack Kit: For mounting one or two units in
an EIA 19-inch rack.
0.23
31.8
1.25
5.8
43.6
1.72
mm
in
482.6
19.00
Front View
355.5
14.00
Side View
Rack Kit
S9 37A41AE
Construction: Steel chassis with sheet metal cover and plastic bezel.
Finish: Dark plum-colored case and front panel with medium plum keys.
Dimensions: Height: 1 standard rack unit; width: 1/2 standard rack unit. 223 W x 362 D x 40 H mm (8.77 x 14.25 x 1.59 in).
Weight: 2 kg (4.5 lb).
Complies with the limits for a Class B digital device pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada.
ALL SPECIF IC A TION S SUBJEC T TO CHANGE WITHOUT NOTICE. IN FORMATION FURNISHED BY PHILIPS COMM UNICATION & SECURITY SYSTEMS INC. (PCSS) IS BELIEVED TO BE ACCURATE AND RELIABLE. HOWEVER, NO RESPONSIBILITY OR LIAB ILITY IS ASSUMED BY PCSS FOR ITS USE , N OR FOR ANY IN FRINGE ME N T OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES WHICH MAY RESULT FROM ITS USE. NO LICENSE IS GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT OR OTHER RIGHTS OF PCSS.
© 1994, 1995 by Philips Communication & Security Systems Inc. All Right Reserved. BURLE ® is a registered trademark of BURLE TECHNOLOGIES, INC. Marca(s) Registrada(s).
Philips Communication & Security Systems Inc., 1004 New Holland Avenue, Lancaster, PA 17601-5606, USA Tel: 1-717-295-6123 Fax: 1-717-295-6097 Philips Communication & Security Systems Inc., 986 Packer Way, Sparks, NV 89431, USA Tel: 1-702-331-4155 Fax: 1-702-331-2306 Philips Communication & Security Systems Inc., Access Control Hardware, 7041 Orchard, Dearborn, MI 48126-1781, USA Tel: 1-313-846-2623 Fax: 1-313-846-3569 Philips Electronics UK Ltd., Windmill Court, Brooklands Close, Sunbury-on-Thames, Middlesex TW16 7DX, England, U.K. Tel: 44-1932-765666 Fax: 44-1932-783198 Tlx: 851-917176 n.v. Philips Professional Systems s.a., Monnikenwerve 17-19, B-8000 Brugge, Belgium Tel: 32-50-454670 Fax: 32-50-454544 Philips Singapore Pte Ltd., 360 Orchard Road, #09-01A International Building, Singapore 0923, Republic of Singapore Tel: 65-734-7802 Fax: 65-734-1362 Telex: 786 37105
Printed in U.S.A./SEP95 Supersedes JUN95 Reprinted JUL96 TC8276
Loading...