Philips TAA5205BK/00 user manual

Headphones

5000 Series

TAA5205

User manual

Register your product and get support at

www.philips.com/support

Contents

1 Important safety instructions 2

Hearing Safety 2
General information 2

2 Your True wireless
earpieces 3

What's in the box 3
Other devices 3
Overview of your True wireless

earpieces 4

3 Get started 5

Charge the battery 5
Pair the earpieces with your
Bluetooth device at the rst
time 6
Pair the earpieces with another
Bluetooth device 7

4 Use your earpieces 7

Connect the earpieces to your

Bluetooth device 7
Power on/o 8
Manage your calls and music 8
LED indicator status 8
How to wear 9

5 Reset the earpieces 10

6 Technical data 10

7 Notice 11

Declaration of conformity 11
Disposal of your old product
and battery 11
Remove the integrated battery 11
Compliance with EMF 12
Environmental information 12
Notice of compliance 12

8 Trademarks 14

9 Frequently asked questions 15

1 Important

General information

safety

instructions

Hearing Safety

Danger

 To avoid hearing damage, limit the time you

use headphones at high volume and set the
volume to a safe level. The louder the
volume, the shorter the safe listening time is.

Be sure to observe the following guide­lines when using your headset.

• Listen at reasonable volumes for
reasonable periods of time.

• Be careful not to adjust the volume
continuously upwards as your
hearing adapts.

• Do not turn up the volume so high
that you can't hear what's around
you.

• You should use caution or tempo­rarily discontinue use in potentially
hazardous situations.

• Excessive sound pressure from
earpieces and headphones can
cause hearing loss.

• Using headphones with both ears
covered while driving is not recom­mended and may be illegal in some
areas while driving.

• For your safety, avoid distractions
from music or phone calls while in
trac or other potentially dangerous
environments.

To avoid damage or malfunction:

Caution

 Do not expose headphones to excessive heat
 Do not drop your headphones.
 Headphones shall not be exposed to dripping

, splashing water.

 Do not allow your headphones to be

submerged in water.

 Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives.

 If cleaning is required use a soft doth, if

necessary dampened with a minimum amount
of water or diluted mild soap, to clean the
product.

 The integrated battery shall not be exposed to

excessive heat such as sunshine, re or the
like.

 Danger of explosion if battery is incorrectly

replaced. Replace only with the same or
equivalent type.

• Disposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery,
can result in an explosion;

• Leaving a battery in an extremely high
temperature surrounding environment can
result in an explosion or the leakage of
ammable liquid or gas;

• A battery subjected to extremely low air
pressure that may result in an explosion or the
leakage of ammable liquid or gas.

About operating and storage temperatures
and humidity

• Store in a place where temperature is
between -20°C (-4°F) and 50°C (122 °F)
(up to 90% relative humidity.

• Operate in a place where temperature
is between 0°C (32°F) and 45°C (113 °F)
(up to 90% relative humidity.

• Battery life may be shorter in high or
low temperature conditions.

• Replacement of a battery with an
incorrect type that can defeat a
safeguard (for example, in the case of
some lithium battery types);

2 Your True

wireless
earpieces

Congratulations on your purchase, and
welcome to Philips! To fully benet
from the support that Philips oers,
register your product at
www.philips.com/support.
With this Philips True wireless earpiec­es, you can:

• enjoy convenient wireless
handsfree calls;

• enjoy and control wireless music;

• switch between calls and music.

Quick start guide

Global Warranty

Safety leaet

What's in the box

Philips True wireless earpieces
Philips TAA5205

Replaceable rubber ear caps x 3 pairs

USB-C charging cable (for charging only)

Other devices

A mobile phone or device (e.g. note­book, PAD, Bluetooth adapters, MP3
players etc) which supports Bluetooth
and is compatible to the earpieces
(see 'Technical data' on page 10).

Overview of your True
wireless earpieces

LED indicator (Earpieces)



Microphone



Multi-function touch



LED indicator (charging box)



USB-C charging slot



3 Get started

Charge the battery

Note

 Before you use your earpieces for the rst

time, place the earpieces in the charging box
and charge the battery for 3 hours for
optimum battery capacity and lifetime.

 Use only the original USB-C charging cable to

avoid any damage.

 Finish your call before charging the earpieces,

as connecting the earpieces for charging will
power the earpieces o.

Charging Box

Connect one end of the USB cable into
the charging box, and another end into
the power source.

The charging box starts charging.

• Charging process is veried by the
white LED light on the front panel.

• When the charging box is fully
charged, the blue light goes on.

Tip

 Normally, a full charge takes 2 hours (for the

earpieces or charging box) by USB cable.

Tip

 The charging box serves as a portable backup

battery for charging the earpieces. When the
charging box is fully charged, it supports 3
times full recharge cycle for the earpieces.

Earpieces

Place the earpieces in the charging box.

The earpieces start charging.

• Charging process is veried by white
LED light on the earpieces.

• When the earpieces is fully charged,
the white light goes o.