Philips Support à dosette Chocobreak User Manual [en, de, fr]

HD7007

HD7812 HD781

HD781

HD7

805

ENGLISH

4222.200.0170.1

2/5

Introduction

Douwe Egberts and Philips have specially developed this pod holder to make a high-quality hot choco drink with one push of the button. Use this SENSEO® Choco pod holder together with the special Douwe Egberts SENSEO® Choco pods in your SENSEO® machine.

This instruction leaet is a supplement to the user manual

of your SENSEO® machine. It only describes how you should use the specially designed SENSEO® Choco pod holder with the purple handle in your SENSEO® machine. For all other instructions, please consult the user manual that came with your SENSEO® machine. For information regarding a SENSEO® Choco pod holder for other SENSEO® models, contact the Philips Consumer Care Centre.

General description (Fig. 1)

A Handle B Metal pod holder C Plastic hot choco outlet

Before first use

The SENSEO® Choco pod holder with the purple

handle is only suitable for use in SENSEO® machine models HD7812, HD7811, HD7810 and HD7805. It is NOT suitable for SENSEO® models HD7852HD7850, HD7842, HD7841, HD7840, HD7830HD7820 and HD7800 (Fig. 2)

1 Clean the SENSEO

hot water and some washing-up liquid or in the dishwasher.

Now you are ready to prepare SENSEO® Choco with your SENSEO® Choco pod holder.

Using the SENSEO

Tip: If you have used the SENSEO® machine to make coffee,

ush the machine to remove coffee residues before you prepare a hot choco drink. To ush the machine, put the

SENSEO® Choco pod holder with the purple handle in the

machine without a pod and place a glass (or mug) with a capacity of at least 150ml under the spout. Then close the lid and press the 1-cup button.

Tip: To make sure your hot choco drink. has the right temperature, heat up your glass (or mug) before you prepare a hot choco drink. You can heat up your glass (or mug) by placing it under the spout when you ush the machine or by rinsing the glass (or mug) under a hot tap.

1 Fill the water reservoir with cold water up to the

MAX indication and put it back onto the machine.

Never pour other liquids than drinking water into the water reservoir.

A full reservoir allows you to prepare a hot choco

drink a number of times. This makes it unnecessary

to ll the water reservoir each time you want to

prepare a glass (or mug) of SENSEO® Choco.

2 Press the on/off button.

The light in the on/off button ashes when the

water heats up.

Heating up takes approx. 90 seconds.

When the light is continuously on, the machine is

ready for use.

3 Open the lid of the machine.

If there is still a pod holder in the machine, remove it.

4 Place the SENSEO

purple handle in the machine.

The coffee pod holders are NOT suitable for preparing SENSEO® Choco.

5 Place a SENSEO

centre of the SENSEO® Choco pod holder with the convex side pointing downwards and lightly press the pod.

Choco pod holder with

Choco pod holder

Choco pod holder with the

Choco pod properly in the

Only use SENSEO

Choco pods, as they have been specially designed to prepare SENSEO® Choco in the SENSEO® machine with the special SENSEO® Choco pod holder.

Never use torn pods or loose cocoa powder, as this causes the machine to become blocked.

Never use any cups, capsules or coffee pods in this pod holder.

6 Close and lock the lid.

Make sure the lid is locked properly.

Never press the 1-cup button when the lid is still open.

7 Place one glass (or mug) with a capacity of at least

150ml under the spout.

8 Press the 1-cup button.

The SENSEO® machine starts to prepare

SENSEO® Choco. The machine automatically supplies the optimal

amount of water for one glass (or mug) of SENSEO® Choco.

You can interrupt the SENSEO® Choco preparation process at any time by pressing the on/off button. If you switch the machine back on after you have interrupted the preparation process, the machine does not complete the interrupted preparation cycle.

Do not remove the water reservoir during a preparation cycle, as this causes the machine to draw

in air. When this happens, the machine only partly lls

the next glass (or mug).

9 Remove the SENSEO

Choco pod holder after use

and throw away the used SENSEO® Choco pod.

Be careful when you do this. There may still be some hot water or hot choco in or on the SENSEO® Choco pod.

10 When you have used the SENSEO

machine to

prepare a hot choco drink, ush the machine with

hot water before you use it to brew coffee. Flushing removes choco residues that may be left

behind in the machine. To ush the machine, place

the SENSEO® coffee pod holder without a pod in the machine and place a glass (or mug) with a capacity of at least 150ml under the spout. Then close the lid and press the 1-cup button.

Cleaning

1 Remove the SENSEO

Choco pod holder with the purple handle from the SENSEO® machine and throw away the used SENSEO® Choco pod.

2 Clean the SENSEO

Choco pod holder with the

purple handle in hot water after every use.

If necessary, use some washing-up liquid or put the pod holder in the dishwasher.

3 Make sure the sieve in the centre of the SENSEO

Choco pod holder with the purple handle is not clogged.

If the sieve is clogged, unclog it by rinsing the pod holder under a running tap. If necessary, use a washing-up brush to clean the sieve.

4 Rinse the SENSEO

purple handle with fresh water after cleaning.

5 Place the SENSEO

purple handle back into the machine or store it.

Tip: We advise you to clean all detachable parts of the

SENSEO® machine regularly.

Guarantee & service

If you need service or information or if you have a problem, please visit the Philips website at www.philips. com or contact the Philips Consumer Care Centre

in your country (you nd its phone number in the worldwide guarantee leaet).

Choco pod holder with the

+ 3 hidden pages