Philips Standard Finish Flange Options User Manual

Standard Finish Options

Note: Not all finishes available for all trims.

Calculite

Standard Finish & Flange Options

CL Clear

Clear is the most specular and
therefore most efficient finish
available. Clear reflectors deliver
maximum photometric per formance
but can produce a mirror image of
the interior of the space.

CCZ Champagne Bronze

Champagne Bronze is a semi­specular finish that softens the
light at the source of the reflector
while providing a warmer reflector
appearance. Light output is slightly
warmer as well.

Flange Options

CCL Comfort Clear

Comfor t Clear is a slightly dif fuse
clear finish, which eliminates irides­cence and reduces the mirror image
inherent with specular finishes.

GD Gold

Gold is a specular finish that
provides a pale tint of color for
slightly warming the light output.
Reflector appearance mixes well in
spaces with gold and brass finishes.

™

CCD Comfort Clear™ Diffuse

Comfor t Clear Diffuse is a semi­specular finish that softens the
light at the source of the reflector.
The finish creates a subtle, even
luminance from the reflector cone.

MG

Multigroove trims provide a seam­less mat te black aluminum baffling
that captures stray light for a very
low brightness aperture.

WH White

The mat te white finish produces
the brightest aperture when illumi­nated but provides the smoothest
transition to most ceilings when
off. White is available only with a
white flange.

BK Black

Black is a specular finish that pro ­vides the lowest aperture brightness
possible and significantly reduces
source identific ation in a ceiling.

P Polished Flange

5/8" wide integral flange polished and finished to match
the appearance of the interior of the reflector (available
option on most reflector types).

Care & Maintenance

If handling of reflectors with Alzak® finish is required, the use of clean white or plastic film gloves is recommended
to avoid fingerprints. Alzak® surfaces can be cleaned by the following methods: Wipe off with soft clean, dry
lint-free cloth ; or wipe off with a soft cloth dampened in mild detergent solution, rinse, then wipe dry with lint-free
cloth or paper towel. Avoid gritty cleaning agents.

Note: Not all finishes are available for all trims. Refer to specification sheet for availability.

© 2008 Philips Group

Lightolier is a Philips group brand

W White Painted Flange

5/8" wide integral flange painted mat te white. Standard
trim det ail on all reflectors.