Philips SLV3220 User Manual
Wireless TV Link
User Manual
SLV3220
A
21 4 53
WIRELESS
SLV3220 WIRELESS TVLINK TRANSMITTER
WIRELESS
21
SOURCE
B
IR
SOURCE 1
R
SOURCE 2
PICTURE
CHANNEL
1 2 3 4
DC 9V
VIDEO AUDIO L
678910
1312 14
WIRELESS
SLV3220 WIRELESS TVLINK RECEIVER
WIRELESS
SOURCE
PICTURE
CHANNEL
1 2 3 4
DC 9V
151617
F
202019
Contents
Page
Overview 4
Control and display elements 4
Your Wireless TV Link 5
Safety 5
Installation 6
Operation 7
Enjoy your Wireless TV Link 7
Troubleshooting 9
Information 11
Information 11
Maintenance and service 11
Recycling and disposal 11
Warranty 12
Glossary 12
EN
3
EN
Overview
Control and display elements
A Transmitter
1 Integrated remote control blaster light 2 On/off switch 3 Power light:
> red: standby
> green: on
4 TV2 source indicator 5 SOURCE button 6 Power input connector (DC 9V) 7 Wireless channel selection switch 8 SOURCE 2 connectors (red/white/yellow) 9 SCART cable 10 Remote control blaster cord port
B Receiver
12 Integrated remote control blaster light 13 On/off switch 14 Power light:
> red: standby
> green: on
15 Power input connector (DC 9V) 16 Wireless channel selection switch 17 SCART cable
F Remote control blaster cord
19 Connector 20 Blaster light
4
Your Wireless TV Link
You can say good-bye to wires. With your Wireless TV
Link you can now wirelessly connect a second TV and
choose between two devices to watch on your second
TV.
Safety
• Read the instructions in this manual carefully before
you connect, install and use the product.
• Keep this manual for future reference.
• The product is for indoor use only.
• Do not use the product close to water.
• Do not expose the product to extreme heat.
• In case of technical difficulties, do not open the
product. Bring it to your Philips dealer.
• Do not cover the product.
• Connect the power adapters only to a
220-240 V AC/50 Hz power supply.
• The product can cause interference to other
equipment. Check if any equipment near the product
can be affected before you start using it.
EN
5
Loading...