ENGLISH
ENGLISH 9
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to your particular product; however, when using
baby monitor equipment, basic safety precautions should always be followed to reduce the risk of
re, electric shock and injury to persons, including the following:
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including ampliers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specied by the manufacturer.
12 Unplug this appliance during lightning storms or when unused for long periods of time.
13 Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped. For assistance visit our website www.philips.com/AVENT or call 1-800-54-AVENT (1-
800-542-8368).
14 This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult
supervision and should not be used as such.
15 Use this appliance only for its intended use as described in this manual.
16 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
17 Products should not be used while you are in a bathtub, shower or pool. Immersion of the
product in water could cause an electrical shock.
18 This product should be operated only from the type of power source indicated on the type
plate of the adapters (A10, B5). If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
19 Do not overload wall outlets and extension cords as this can result in the risk of re or electric
shock.
20 Never push objects of any kind into this product through casing slots as they may touch
dangerous voltage points or short out par ts that could result in a risk of re or electric shock.
Never spill liquid of any kind on the product.
21 To reduce the risk of electric shock, do not disassemble this product, but visit our website www.
philips.com/AVENT or call 1-800-54-AVENT (1-800-542-8368) for assistance. Opening or
removing covers (except battery compar tment lids) may expose you to dangerous voltage or
other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently
used.
22 To prevent strangulation with power cord, never place monitor within reach of child. Do not use
with extension cords.
If your product utilizes batteries, the following additional precautions should be
observed:
1 Use only the type and size of batteries specied in the user manual.
2 Do not dispose of batteries in re. They may explode. Dispose of batteries according to
the instructions.
3 Exercise care in handling batteries in order not to short out the batteries with conducting
materials such as rings, bracelets and keys. Overcharging, short circuiting, reverse charging,
mutilation, or incineration of batteries must be avoided to prevent one or more of the following
occurrences: release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface
temperature.
4 Do not attempt to recharge batteries provided with or identied for use with this product that
are not intended to be charged. The batteries may leak corrosive electrolyte or explode.
5 Do not attempt to rejuvenate the batteries provided with or identied for use with this product
by heating them. Sudden release of battery electrolyte may occur, causing burns or irritation to
eyes or skin.
6 If and when necessary, the batteries must be replaced with identical new ones from the same
manufacturer. If a battery to be replaced is connected with other batteries in series, it is
recommended that the other batteries be replaced with new ones at the same time.
7 Reverse polarity installation of the batteries in the end product must be avoided. Reverse
insertion of batteries can cause charging, and that may result in leakage or explosion.
8 Remove batteries from this product if you store the product over 30 days because the batteries
could leak and damage the product.
9 Discard ‘dead’ batteries as soon as possible since ‘dead’ batteries are more likely to leak in a
product. If a battery has leaked or vented, it should be replaced immediately using protective
gloves.
10 Do not store batteries in high-temperature areas. Batteries that are stored in a freezer or
refrigerator for the purpose of extending shelf life should be protected from condensation
during storage and defrosting. Batteries should be stabilized at room temperature prior to use
after cold storage.
11 If your product uses rechargeable batteries, charge the batteries only in accordance with the
instructions and limitations specied in the user manual.
12 There is a risk of explosion if batteries are replaced with an incorrect type. For the
unit, always use the SCD600 Li-Ion rechargeable battery pack as supplied with the
appliance.
SAVE THESE INSTRUCTIONS
-
CAUTION:THE SYMBOL SHOWN IN FIGURE 1 MEANS THAT THERE IS A
RISK OF EXPLOSION OF THE BATTERIES AND/OR OF SERIOUS DAMAGE
TO THE BABY MONITOR IF THE BATTERIES OR THE ADAPTER ARE
REPLACED WITH AN INCORRECT TYPE. (Fig. 1)
Adapter for baby unit:
Input: 100-240 VAC 50/60Hz
-
Output: 6.0 VDC 0.8A
Adapter no. OH-1048A0600800U1
-
Adapter for parent unit:
Input: 100-240 VAC 50/60Hz
-
Output: 6.0 VDC 0.8A
Adapter no. OH-1048A0600800U1
-
The electrical outlet shall be installed near the equipment and shall be easily accessible.
For the baby unit, only use 1.5V AAA alkaline batteries (batteries not supplied).
For the parent unit, only use the SCD600 Li-Ion rechargeable battery as supplied with the appliance.
Dispose of used batteries according to the instructions.
Compliance information
The FCC ID number is located on the casing bottom of the parent unit and in the battery
compartment of the baby unit.
parent