Philips SCB3030NB, DVDR3390 User Manual 3

Quick Start Guide

Printed in China 12 NC 3139 245 20932

Need help?

User Manual

See the user manual that came with your Philips recorder.

Hotline

Call 1-888-PHILIPS (1-888-744-5477) for our operators.

Online

Go to www.philips.com/usasupport.

Enjoy

Inserting discs

DVD Player/ Recorder DVDR3390

Connect

Set up

Enjoy

What’s in the box?

DVD Player/ Recorder

Remote Control

and 2 batteries

RF Coaxial Cable

Audio/Video Cable

Philips recorder (front panel)

Recording (continued)

B Press REC SOURCE repeatedly to select

the source to record from.

Note This helps to select whether you want to

record from the tuner or from any device connected through audio/video input connectors.

C Press REC MODE repeatedly to select the

record mode.

Note Choose from recording at high quality - HQ

(available recording time is 1 hour), standard play

- SP (2 hours), extended play - EP (4 hours) and super

long play - SLP (6 hours).

D Use up / down keys to scroll the

channels, or press 0 -9 to select the channel that you want to record.

E Press REC to start recording, press REC

again to automatically record 30 minutes.

Note Every time you press REC , an

additional 30 minutes is added to the recording time.

F To end recording, press STOP . ‘Update’

will be displayed on the recorder.

G To playback the recording, press DISC MENU

, select the title and press PLAY .

A Press OPEN/CLOSE on the

front of the recorder.

B Place a DVD disc in the tray with the label

facing up.

C Press OPEN/CLOSE on the front of

the recorder again.

Playback

A Press up or down to scroll through

the list of options or titles.

B Press PLAY on the title you want to play. C To stop press STOP . D Press DISC MENU to go back.

Recording

A For recording, place a blank DVD±RW or

DVD±R disc in the tray with the label facing up and close the tray.

Discs for recording

Type Record Playback Edit

User

Manual

Philips recorder (front panel)

dvdr3390_37_eng_qsg_20932b.indd 1dvdr3390_37_eng_qsg_20932b.indd 1 2006-12-08 1:24:52 PM2006-12-08 1:24:52 PM

Connect

Set up

Start with the ‘Basic Connection.’ If you have a Cable Box or Satellite Receiver, follow the instructions for ‘Connection with a Cable Box or Satellite Receiver’.

COMPONENT

VIDEO

VIDEO (CVBS)

S-VIDEO (Y/C)

COAXIAL

OUT 3

(DIGITAL AUDIO)

OUT 2

OUT 1

AUDIO

Television (rear)

Philips recorder (rear)

VIDEO (CVBS)

EXT 2

S-VIDEO (Y/C)

INPUT

EXT 1

ANTENNA-IN

TV-OUT

AUDIO

Television (rear)

Philips recorder (rear)

Philips recorder (front panel)

To AC power

Basic Connection

A Before connecting, unplug the antenna cable that

is currently connected to your TV.

B Connect the antenna cable to the ANTENNA-

IN jack on the recorder.

C Use the supplied RF coaxial cable to connect the

TV-OUT

jack on this recorder to the

Antenna In jack on the TV.

D Use the supplied audio/video cable (yellow plug)

to connect the VIDEO (CVBS) -OUT1 jack on this recorder to the VIDEO IN jack on the TV.

E Use the supplied audio/video cable (red/ white

plugs) to connect the AUDIO OUTPUT jacks on this recorder to the AUDIO IN jacks on the TV.

F Connect the power cable from the recorder to

an AC power outlet.

Connection with a Cable Box or Satellite Receiver

To antenna or set-top box

To AC power

A Keep the existing antenna connection from the

Antenna TV signal to the Cable Box/ Satellite Receiver.

B Use an antenna cable to connect the ANTENNA-

jack on the recorder to the RF OUT jack on

the Cable Box/Satellite Receiver.

C Follow steps C to E under ‘Basic Connections’

before you proceed to step D below.

Note The antenna connection may be different

depending on the Satellite Receiver/Cable Box. Refer to its user manual for proper antenna connection.

D Use a yellow video cable (not supplied) to connect

the VIDEO (CVBS) EXT 1 jack on this recorder to the VIDEO OUT jack on the Cable Box/ Satellite Receiver.

E Use another red and white audio cable (not

supplied) to connect the AUDIO INPUT jacks on this recorder to the AUDIO OUT jacks on the Cable Box/ Satellite Receiver.

For additional connection diagrams, see the

accompanying User Manual.

Select the video input channel on

your TV

A Press STANDBY-ON on the recorder. B Turn on the TV.

Note If connected to your VCR, make sure it is

switched off or in standby mode before proceeding.

C Press SYSTEM MENU . D Select the TV’s video input channel that corresponds

to the jacks connecting the recorder to the TV.

Note Video Input selection varies for different

brands/models of TVs. Consult the user manual that came with your TV if none of the below is successful.



Press channel 2 on your TV. Then press the channel down button to locate the video input channel. (This channel is usually located between the lowest and highest TV channels.)



OR, for some TVs, there may be a button on the TV’s remote control that accesses the video input channel labeled SOURCE, AV or SELECT.



OR, select the Video Input Channel from the TV’s on-screen menu system.

Note Consult your TV manufacturer if none of the

above is successful.

B Initial Installation

A Press SYSTEM MENU on the remote

control.

aced

Note Use up / down keys to toggle

through the options. Select an item by pressing

right

. To con rm a setting, press OK .

Setup and install TV channels.



Highlight and press right .

Select { Tuner Input Source } and press OK .

{ Cable }

if the recorder is connected directly to the cable signal or through set-top box.

{ Air } if the recorder is connected directly to an indoor

or outdoor antenna.

Note Press OK

to con rm your selection.



Select { Channel Search } and press OK

on the remote control to start automatic TV channel search.

Note If using a cable box/ satellite receiver, you may only pick up one channel. Leave the recorder on this channel and change channels at the cable box or satellite receiver.

Select the language.



Highlight and press right .

– selects TV On-Screen Display language. – selects default Disc Menu language. – selects default subtitle language. – selects default audio language.

Select the date and time.



Highlight and press right .

Use the numeric keypad 0

-9 to

input the date/time, then press OK

con rm.

E Press SYSTEM MENU to exit.

To antenna or set-top box

Cable Box/Satellite Receiver (rear)

R L

OUT

AUDIO

S-VIDEO

VIDEO

STANDBY-ON

System Menu - General

creen Save

Progressuve/ Interlace

Video Output Forma

Restore Factory Settin

Interl

VIDEO (CVBS)

INPUT

AUDIO

COMPONENT

OUT 1

VIDEO

OUT 2

COAXIAL

OUT 3

(DIGITAL AUDIO)

S-VIDEO (Y/C)

OUTPUT

RLR

AUDIO

MAINS

ANTENNA-IN

TV-OUT

VIDEO (CVBS)

EXT 1

EXT 2

S-VIDEO (Y/C)

VIDEO (CVBS)

INPUT

AUDIO

COMPONENT

OUT 1

OUT 2

S-VIDEO (Y/C)

OUTPUT

VIDEO

RLR

COAXIAL

OUT 3

AUDIO

(DIGITAL AUDIO)

MAINS

VIDEO (CVBS) EXT 1

ANTENNA-IN

TV-OUT

EXT 2

S-VIDEO (Y/C)

dvdr3390_37_eng_qsg_20932b.indd 2dvdr3390_37_eng_qsg_20932b.indd 2 2006-12-08 1:24:55 PM2006-12-08 1:24:55 PM