English 6
Français (Canada) 50
6
English
Contents
General description _________________________________________ 7
Introduction - Identify your shaver ____________________________ 7
Fig. A _____________________________________________________ 8
Fig. B______________________________________________________ 9
Important safety information ________________________________ 10
What do the icons on the display mean? (Fig. A) ________________ 12
What do the icons on the display mean? (Fig. B) ________________ 15
Main menu (Fig. A) _________________________________________ 17
Main menu (Fig. B)__________________________________________ 18
How do I connect my shaver and smartphone? (Fig. A) __________ 20
How do I connect my shaver and smartphone? (Fig. B) __________ 22
What is my shaver telling me? (Fig. A) _________________________ 24
What is my shaver telling me? (Fig. B) _________________________ 27
How do I charge my appliance? ______________________________ 29
How do I use my appliance and the attachments? ______________ 30
How do I clean my appliance and the attachments?_____________ 34
How do I replace the shaving heads?__________________________ 41
Ordering accessories ________________________________________ 43
Troubleshooting ___________________________________________ 43
Assistance _________________________________________________ 47
Further guidance ___________________________________________ 47
Full Two-Year Warranty _____________________________________ 47
Disposal ___________________________________________________ 48
Trademarks ________________________________________________ 49
General description
1 Pop-up trimmer
2 Trimmer release slide
3 Shaving unit
4 Shaving unit release button
5 On/off button
6 Menu button
7 Socket for small plug
8 Charging stand
9 Supply unit
10 Small plug
11 Pouch
12 Philips Quick Clean Pod Cartridge
13 Quick Clean Pod
14 Cleaning brush
15 Length settings
16 Click-on beard styler attachment
17 Comb for beard styler attachment
Note: The accessories supplied may vary for different
products. The box shows the accessories that have been
supplied with your appliance.
Introduction - Identify your shaver
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome or via the app.
This user manual contains information about two
versions of S9000 Shaver. Fig. A and Fig. B help you
identify which version you have.
English
7
8
Fig. A
English
Fig. B
English
9
10
English
Important safety information
Only use the product for its intended purpose. Read this
important information carefully before you use the
product and its batteries and accessories, and save it for
future reference. Misuse can lead to hazards or serious
injuries. Accessories supplied may vary for different
products.
Warning
- Keep the supply unit and the charging stand dry.
- This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap. For
safety reasons, the shaver can therefore only be used
without cord.
- Do not modify the supply unit.
- This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
- Unplug the appliance before cleaning it with water.
- Do not use a damaged appliance. Replace damaged
parts with new Philips parts.
- Only use cold or lukewarm water to clean the
appliance.
- Because of hygiene, only one person should use the
appliance.
English
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids to clean the
appliance.
- Always place the cleaning system on a stable, level
and horizontal surface to prevent leakage.
- Always make sure the cartridge compartment is
closed before you use the cleaning system.
- When the cleaning system is ready for use, do not
move it to prevent leakage of cleaning fluid.
- Water may drip from the socket at the bottom of the
shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
- Do not use the supply unit in or near wall sockets that
contain an electric air freshener to prevent irreparable
damage to the supply unit.
- Remove piercings, jewelry, glasses etc. before using
the appliance.
- Be careful when handling your smartphone near
water and in moist environments.
- Radio waves may impair the operation of pacemakers
and other medical devices. Consult your phycisian for
advice and keep the appliance at least 20cm away.
- Only use original Philips accessories or consumables.
Only use detachable supply unit HQ8505.
- Charge, use and store the product at a temperature
between 41 °F / 5°C and 95 °F / 35°C.
- Keep product and batteries away from fire and do not
expose them to direct sunlight or high temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than usual,
stop using and charging the product and contact
Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle the
product or battery to prevent batteries from heating
up or releasing toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge batteries.
11
12
English
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
Philips Quick Clean Pod Cartridge fluid
- Keep out of reach of children.
- Do not swallow.
- In case of eye contact, rinse with plenty of water.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Radio Equipment Directive
- S9000 series appliances are equipped with Bluetooth
class 2.
- The frequency band in which the Bluetooth on S9000
series appliances operates is 2.4GHz.
- The maximum radio frequency power radiated in the
frequency band in which the S9000 series appliances
operate is less than 20 dBm.
- This equipment has been so constructed that the
product complies with the requirement of Article
10(2) as it can be operated in at least one EU Member
State as examined and the product is compliant with
Article 10(10) as it has no restrictions on putting into
service in all EU member states.
- Hereby Philips declares that S9000 series appliances
are in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at
www.philips.com/support.
What do the icons on the display mean? (Fig. A)
- Main Menu
You can toggle through the menu items by pressing the menu
button.
You can also activate or deactivate certain features with a long
press.
Icon Meaning
The main menu shows the status of the battery in percentages.
The Motion Control sensor menu icons tell you if the motion
during your last shave was good or can be improved
You can activate the travel lock in this menu (see 'Main menu
(Fig. A)').
Here the display shows that your shaver is not paired to your
smartphone.
The display shows that your shaver is paired to your smartphone.
- Switching the shaver on
Press the on/off button to switch on the shaver.
Icon Meaning
When you switch on the shaver, a short animation with these
icons shows which pressure feedback setting you activated (see
'What is my shaver telling me? (Fig. A)'). You can toggle through
the pressure feedback settings by pressing the menu button.
English
13
- Warnings and notifications
Icon Meaning
The battery is almost empty and you need to charge your shaver
(see 'How do I charge my appliance?').
14
English
When the data storage is almost full, you receive a notification
reminding you to synchronize your shaves. To prevent data loss,
synchronize the shaver with the app (see 'How do I connect my
shaver and smartphone? (Fig. A)').
The shaving unit is soiled or damaged to such an extent that the
motor cannot run. Clean the shaving heads thoroughly.
You are using the wrong supply unit (see 'How do I charge my
appliance?'). Only use the supply unit (HQ8505) that is supplied
with the shaver.
- Cleaning the shaver
Icon Meaning
A reminder: clean your shaver in the quick cleaning pod (see 'How
do I use the Quick Clean Pod?').
A reminder: clean your shaver (see 'How do I clean my appliance
and the attachments?').
The cleaning process is in progress and the display shows the
remaining cleaning time as a clock, or in seconds, if you press the
menu button.
The cleaning process has been interrupted (see
'Troubleshooting').
- Unplug for use
Icon Meaning
Unplug the shaver before you use it.
English
What do the icons on the display mean? (Fig. B)
- Main Menu
You can toggle through the menu items by pressing the menu
button.
You can also activate or deactivate certain features with a long
press.
Icon Meaning
This menu shows the status of the battery in percentages.
You can activate or deactivate the travel lock in this menu (see
'Travel lock').
You can deactivate or reactivate the light ring feedback in this
menu (see 'Light ring feedback').
- Switching the shaver on
Press the on/off button to switch on the shaver.
- Bluetooth
Icon Meaning
This icon shows that your shaver is paired to your smartphone
(see 'Pair the shaver and smartphone').
15
This icon will appear after you unpair your shaver from your
smartphone (see 'Unpair the shaver and smartphone').
- Warnings and notifications
16
English
Icon Meaning
The battery is almost empty and you need to charge your shaver
(see 'How do I charge my appliance?').
When the data storage is almost full, you receive a notification
reminding you to synchronize your shaves. To prevent data loss,
synchronize the shaver with the app (see 'How do I connect my
shaver and smartphone? (Fig. A)').
The shaving unit is soiled or damaged to such an extent that the
motor cannot run. Clean the shaving heads thoroughly.
You are using the wrong power cord. Only use the power cord
that is supplied with the shaver.
- Cleaning the shaver
Icon Meaning
A reminder: clean your shaver in the quick cleaning pod (see 'How
do I use the Quick Clean Pod?').
A reminder: clean your shaver.
The cleaning process is in progress and the display shows the
remaining cleaning time as a clock, or in seconds, if you press the
menu button.
The cleaning process has been interrupted (see
'Troubleshooting').
- Unplug for use
Icon Meaning
Unplug the shaver before you use it.
Main menu (Fig. A)
While your shaver is switched off, you can toggle through
the four menu functions by pressing the menu button.
- Remaining battery charge
This menu item shows the remaining battery charge.
- Motion Control sensor
This menu item shows the motion feedback from your
last shave.
- Travel lock
From this menu item, you can lock and unlock your
shaver by pressing and holding the menu button for 3
seconds. When you are going to travel, you can lock
the shaver to prevent it from accidentally switching
on. When the travel lock is activated, Bluetooth will be
switched off automatically and your shaver will be in
energy saving mode.
- Bluetooth
From this menu item, you can unpair your shaver and
smartphone.
For information about the benefits of pairing your
shaver and smartphone, see 'Benefits of connecting
your shaver to the app'.
Note: Make sure your smartphone is equipped with
Bluetooth® 4.2 or higher.
This shaver is equipped with Bluetooth® 4.2 and
higher to connect to the app. When you have paired
English
17
18
English
your shaver and smartphone, Bluetooth on your
shaver is switched on automatically, even when the
shaver is switched off. This allows your shave data to
be synced later so you don't need to take your
smartphone with you when you shave.
Note: You can switch off Bluetooth on your shaver by
activating the travel lock.
Main menu (Fig. B)
You can toggle through the menu functions by pressing
the menu button.
Remaining battery charge
This menu item shows the remaining battery charge.
Post-shave feedback
Note: This menu is displayed only after you activate this
feature via the app settings (see 'How do I connect my
shaver and smartphone? (Fig. B)').
You can optimize your shaving experience by applying
the right motion and amount of pressure (see 'Shaving').
This item shows the star rating of your last shave. It tells
whether the pressure and motion you applied during the
shave was good, or could be improved.
Travel lock
When you are going to travel, you can lock the shaver to
prevent it from accidentally switching on. In this menu,
press and hold the menu button for 3 seconds to lock or
unlock your shaver. When the travel lock is activated,
Bluetooth will be switched off automatically and your
shaver will be in energy saving mode.
Light ring on/off
Bluetooth
English
During your shave, you receive feedback on how much
pressure you are applying via the light ring at the top of
your shaver handle.
The light ring is active by default. You can deactivate or
reactivate it.
To deactivate the light ring feedback,
Toggle through the menu items by pressing the menu
1
button until you reach the 'Light on' menu.
While you are in the 'Light on' menu, press and hold
2
the menu button for 3 seconds until you see 'Light off'
on the display.
To reactivate the light ring feedback,
Toggle through the menu items by pressing the menu
1
button until you reach the 'Light off' menu.
While you are in the 'Light off' menu, press and hold
2
the menu button for 3 seconds until you see 'Light on'
on the display.
Note: Light ring feedback is only available when the
shaving unit is attached to the handle.
Note: The Bluetooth menu is displayed only when your
shaver is paired to your smartphone (see 'Pair the shaver
and smartphone').
Here you can unpair your shaver and smartphone. To
learn the benefits of pairing your shaver and smartphone,
see 'Benefits of connecting your shaver to the app'.
Note: Make sure your smartphone is equipped with
Bluetooth® 4.2 or higher.
This shaver is equipped with Bluetooth® 4.2 and
higher to connect to the app. When you have paired
your shaver and smartphone, Bluetooth on your
shaver is switched on automatically, even when the
shaver is switched off. This allows your shave data to
be synced later so you don't need to take your
smartphone with you when you shave.
Note: You can switch off Bluetooth on your shaver by
activating the travel lock.
19
20
English
How do I connect my shaver and smartphone? (Fig. A)
Benefits of connecting your shaver to the app
You can use the app to:
- Receive real-time motion and pressure feedback and
guidance,
- Activate and customize post-shave feedback,
- Synchronize your shave data and track your shave
history,
- Improve your shave routine and reduce shavingrelated skin issues,
- Receive personalized advice and recommendations on
style.
Pair the shaver and smartphone
The app is compatible with a wide range of iPhone and
Android™ smartphones.
More information is available at
www.philips.com/MyShaver9000-app
Download the app.
1
Make sure Bluetooth on your smartphone is switched
2
on.
Switch on the shaver to activate Bluetooth.
3
Open the app and follow the instructions to start the
4
pairing process.
Once paired, the shaver and app connect
5
automatically when the app is open and Bluetooth on
your phone is switched on.
Synchronize your shaves
This shaver stores your shave data so you don't need to
take your smartphone with you when you shave or want
to check your shave data at a later stage.
When the data storage is almost full, you receive a
notification reminding you to synchronize your shaves. To
prevent data loss, synchronize the shaver with the app
(see 'How do I connect my shaver and smartphone? (Fig.
A)').
Make sure your phone is close to the shaver and open
1
the app.
The app connects automatically and synchronizes
2
your last shaves.
Unpair the shaver and smartphone
You can pair your shaver with only one smartphone at a
time. To unpair your shaver from your smartphone (e.g.
when you get a new smartphone), follow these steps:
Unpair the shaver
Toggle through the menu items by pressing the menu
1
button until you reach the Bluetooth menu (the
fourth menu).
English
21
Press and hold the menu button until you are
2
presented with a cross and check mark selection.
22
English
Select the check mark by pressing the menu button
3
again to unpair your shaver.
Note: When your shaver is successfully unpaired, you
see the Bluetooth icon on your shaver handle shown
to the left.
Unpair your smartphone
Go to the settings on your smartphone and select
1
Bluetooth.
Tap on the name of the shaver.
2
Tap 'forget' or 'unpair'.
3
Note: The unpairing procedure may vary by
smartphone. Please check your smartphone manual
for more information.
How do I connect my shaver and smartphone? (Fig. B)
Benefits of connecting your shaver to the app
You can use the app to:
- Receive real-time motion and pressure feedback and
guidance,
- Activate and customize post-shave feedback,
- Synchronize your shave data and track your shave
history,
- Improve your shave routine and reduce shavingrelated skin issues,
- Receive personalized advice and recommendations on
style.
Pair the shaver and smartphone
The app is compatible with a wide range of iPhone and
Android™ smartphones.
More information is available at
www.philips.com/MyShaver9000-app
Download the app.
1
Make sure Bluetooth on your smartphone is switched
2
on.
Switch on the shaver to activate Bluetooth.
3
Open the app and follow the instructions to start the
4
pairing process.
Once paired, the shaver and app connect
5
automatically when the app is open and Bluetooth on
your phone is switched on.
Note: When your shaver is paired with a smartphone, the
Bluetooth menu appears as a new item.
Synchronize your shaves
This shaver stores your shave data so you don't need to
take your smartphone with you when you shave or want
to check your shave data at a later stage.
When the data storage is almost full, you receive a
notification reminding you to synchronize your shaves. To
prevent data loss, synchronize the shaver with the app
(see 'How do I connect my shaver and smartphone? (Fig.
B)').
Make sure your phone is close to the shaver and open
1
the app.
The app connects automatically and synchronizes
2
your last shaves.
Unpair the shaver and smartphone
You can pair your shaver with only one smartphone at a
time. To unpair your shaver from your smartphone (e.g.
when you get a new smartphone), follow these steps:
- First, unpair your shaver
English
23
24
English
Toggle through the menu items by pressing the menu
1
button until you reach the Bluetooth menu.
Press and hold the menu button until you are
2
presented with a cross and check mark selection.
Select the check mark by pressing the menu button
3
again to unpair your shaver.
Note: When your shaver is paired with a smartphone, the
Bluetooth menu appears as a new item. When it is
unpaired, this menu will disappear.
Note: When your shaver is successfully unpaired,
Bluetooth icon will briefly appear on the shaver display.
Note: When you want to pair your shaver and
smartphone again, make sure that both are unpaired
first.
- Then, unpair your smartphone
Go to the settings on your smartphone and select
1
Bluetooth.
Tap on the name of the shaver.
2
Tap 'forget' or 'unpair'.
3
Note: The unpairing procedure may vary by
smartphone. Please check your smartphone manual
for more information.
What is my shaver telling me? (Fig. A)
Light ring feedback
During your shave, you receive feedback on how much
pressure you are applying via the light ring at the top of
your shaver handle.
English
The light ring on the handle lights up in various colors
during your shave to give you feedback on how much
pressure you are exerting. These are the default settings:
- When you don't apply enough pressure, the light
ring lights up blue.
- When you apply the correct amount of pressure,
the light ring lights up green.
- When you apply too much pressure, the light ring
lights up orange.
When your shaver is switched on, you can customize the
type of pressure feedback you receive.
Switch on the shaver.
1
Press the menu button to toggle through the pressure
2
feedback options. The table below shows what
pressure feedback you receive with each option.
25
Too little
pressure is
being applied
Full pressure feedback The light ring
lights up blue
Partial pressure feedback No feedback No feedback The light ring
The right
amount of
pressure is
being applied
The light ring
lights up green
Too much
pressure is
being applied
The light ring
lights up
orange
lights up
orange
26
English
No pressure feedback No feedback No feedback No feedback
Note: Pressure feedback is only available when the
shaving head is attached to the handle.
Post-shave feedback
Note: This feature is activated via the app settings (see
'How do I connect my shaver and smartphone? (Fig. A)').
You can optimize your shaving experience by applying
the right motion and amount of pressure (see 'Shaving').
Once this feature is activated, your shaver gives you
feedback right after you shave and switch off your
shaver.
Pressure Guard sensor feedback
When your shaving pressure can be improved, the
Pressure Guard sensor icon displays with an exclamation
mark.
- The pressure you applied during the shave was too
high.
- The pressure you applied during the shave was too
low.
Motion Control sensor feedback
- When your shaving motion can be improved, the
Motion Control sensor icon displays with an
exclamation mark.
- When both the pressure and the motion applied
during the shave is perfect, both icons are
displayed with a check mark.
What is my shaver telling me? (Fig. B)
Light ring feedback
During your shave, you receive feedback on how much
pressure you are applying via the light ring at the top of
your shaver handle.
The light ring on the handle lights up in various colors
during your shave to give you feedback on how much
pressure you are exerting. This feature is active by
default.
- When you don't apply enough pressure, the light
ring lights up blue.
- When you apply the correct amount of pressure,
the light ring lights up green.
- When you apply too much pressure, the light ring
lights up orange.
You can deactivate or reactivate this feature in the Light
ring on/off menu.
Note: Light ring feedback is only available when the
shaving unit is attached to the handle.
English
27
28
English
Post-shave feedback
Note: This feature is activated via the app settings (see
'How do I connect my shaver and smartphone? (Fig. A)').
You can optimize your shaving experience by applying
the right motion and amount of pressure (see 'Shaving').
Your shaver gives you a star rating on motion and
pressure applied during your last shave. Once this feature
is activated,
- A new menu item for post-shave feedback appears on
- After each shave, once you switch off your shaver, you
- or motion,
- or both.
your shaver.
see instant feedback on pressure,
- When you navigate through the menu later, you see
both the motion rating and pressure rating of your
last shave in the new menu item (see 'Main menu (Fig.
B)').
How do I charge my appliance?
Note: This appliance is waterproof. It is suitable for use in
the bath or shower and for cleaning under the tap. For
safety reasons, the appliance can therefore only be used
without cord.
- Charge the appliance before you use it for the first
time and when the remaining battery charge
indicates that the battery is almost empty.
- Charging takes approx. 1 hour.
- Quick Charge: After approx. 5 minutes of charging,
the battery contains enough energy for one full shave.
When the battery is charged to 10%, you can
complete one full shave.
- When the appliance is fully charged it has a cordless
operating time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
Charging with the supply unit
Make sure that the appliance is switched off.
1
Insert the small plug into the appliance and put the
2
supply unit in the wall socket.
- While the appliance is charging, an animation
appears on the display showing the progress.
- When the appliance is fully charged, the battery
percentage shows 100% and the battery icon
shows the battery being full.
After charging, remove the supply unit from the wall
3
socket and pull the small plug out of the appliance.
'Unplug for use' symbol
The 'unplug for use' symbol displays to remind you to
disconnect the appliance from the wall socket and
remove the small plug from the appliance before you
switch it on.
English
29
Charging in the charging stand
Make sure the appliance is switched off.
1
30
English
Put the small plug in the charging stand and put the
2
supply unit in the wall socket.
Place the appliance in the charging stand.
3
Specific models only: The light ring on the bottom of
the charging stand lights up and rotates quickly.
- After approximately 5 minutes, the light ring
rotates slower. The battery now contains enough
energy for one full shave.
- As the appliance continues to charge, the light
ring becomes brighter and rotates slower.
- When the appliance is fully charged, the light ring
lights up fully and stops rotating.
How do I use my appliance and the attachments?
Warning: Always check the appliance and all
accessories before use. Do not use the appliance
or any accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one of
the original type.
Shaving
You can use this appliance either wet or dry, or even
under the shower. For a wet shave, apply some water and
shaving foam or gel to your skin and rinse the shaving
heads under the tap with warm water before following
the steps below.
Switch on the appliance.
1
Move the shaving heads over your skin in circular
2
movements to catch all hairs growing in different
directions. Make sure each shaving head is fully in
contact with the skin. Exert gentle pressure for a close,
comfortable shave.
Note: Do not press too hard, as this can cause skin
irritation. When you apply too much pressure, the
orange light ring lights up (see 'What is my shaver
telling me? (Fig. A)').
Loading...