Page 1
Welcome
Quick start guide
1
Connect
2
Install
3
Enjoy
philips
Page 2
What’s in the box
Handset
Base station
Power adaptor for
base
Line cord*
2 Ni-MH rechargeable AAA batteries
750 mAh
Belt clip
Quick start guide
Battery door
*You may find in the box the line adaptor
delivered separately from the line cord. In
this case, please plug first this line adapter
onto the line cord before connecting it to
the line socket.
Make sure you have all these items in the box. For missing item(s), contact your
dealer.
In multi-handset packs, you will find additional handsets, chargers, power supplies,
and batteries.
Warning :
Always use the cables and batteries provided in the box.
User manual
Guarantee
!
Page 3
1
Connect
Connect the base station
●
Insert the plug of the power
cord into the socket on the
bottom of the base station.
●
Insert the plug of the line
cord into the socket on the
bottom of the base station.
●
Plug the power supply unit
into your power outlet.
●
Plug the line cord into the
line socket.
2
Install
Always use rechargeable batteries.
Insert batteries
Charge handset for 24 hours
If the batteries are completely
exhausted, the handset will
not be able to power-on
immediately. Handset may get
warm during initial charge.
This is normal.
A
A
B
OR
●
Place the two rechargeable
batteries (included) into the
battery compartment.
●
Slide the battery door firmly
into place.
Only use rechargeable
batteries
Page 4
3
Enjoy
Make a call
Press and dial the number.
TIP :You can predial the number before seizing the line.
During a call, press to turn on and off the handset loudspeaker.
Adjust the audio volume while on line
Press or to increase or
decrease the audio volume.
Set the handset ring melody in standby mode
1. Press and hold until you see the current melody name.
2. Select the desired melody by pressing digit keys 0 to 9.
3. Press to confirm.
Change the ringing volume in standby mode
1. Press and hold until you see the current melody name.
Answer a call
Press .
End a call
Press .
2. Press or to increase or decrease the volume level.
3. Press to confirm.
If the ringing volume level is set to OFF, appears.
Save a name and a number in a direct access memory
1. Enter the number in standby mode.
2. Press and hold one of the direct memory keys or
or .
3. Enter the name.
4. Press and hold the same memory key to save the name.
Page 5
Save a name and a number in an extra memory
1. Enter the number in standby mode.
2. Press and hold one of the digit keys (1 to 9).
3. Enter the name.
4. Press and hold the same digit key to save the name.
Call from phonebook memory
Press while viewing a memory. The saved number is dialed.
To insert a pause press and hold , P is is shown.
View phonebook memory
Press one of the direct memory keys or or
OR
press and hold one of the digit keys (1 to 9).
The name and number will be shown.
If the number is longer than 12 digits, only the last 12 digits are shown on
display.
Page 6
Problem
●
Check the connections.
●
Use the line cord provided in the
box.
●
Try to place the base station at
least one metre away from any
electrical appliances.
●
Make sure the product is plugged.
●
Charge the batteries.
●
Check base/charger connections.
●
Check that the batteries are
inserted correctly.
●
Caller ID service may not be activated. Check with your service
provider.
Troubleshooting
For detailed overview see user manual.
Tip
●
No dial tone.
●
Poor audio quality.
●
No symbol on the display.
●
The handset does not charge.
●
Caller ID does not display.
Need help?
User manual
See the user manual that came with your XL340.
Online help
www.philips.com/support
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner.
Document order number: 3111 285 33951
Loading...