Philips pcd5091 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

PCD5091

DECT baseband controller

Objective speciﬁcation Supersedes data of 1996 Oct 30 File under Integrated Circuits, IC17

1997 Jul 21

Philips Semiconductors Objective speciﬁcation

DECT baseband controller PCD5091

1 FEATURES

1.1 DSP software features 2 GENERAL DESCRIPTION 3 ORDERING INFORMATION 4 BLOCK DIAGRAM 5 PINNING INFORMATION

5.1 Pinning

5.2 Pin description 6 FUNCTIONAL DESCRIPTION 7 PACKAGE OUTLINES 8 SOLDERING

8.1 Introduction

8.2 Reflow soldering

8.3 Wave soldering

8.4 Repairing soldered joints 9 DEFINITIONS 10 LIFE SUPPORT APPLICATIONS 11 PURCHASE OF PHILIPS I2C COMPONENTS

1997 Jul 21 2

Philips Semiconductors Objective speciﬁcation

DECT baseband controller PCD5091

1 FEATURES

• 80C51 ports P0, P1, P2 and P3 available for interfacing to display, keyboard, I2C-bus, interrupt sources and/or external memory. Integrated 64 kbyte ROM, 3 kbytes of data memory and 1 kbyte SDR-RAM. External program memory is addressable up to 128 kbytes

• +2.7 to +5 V port (P0 to P3) interface

• TDMA frame (de)multiplexing. Transmission or

reception can be programmed for any slot

• Ciphering, scrambling, CRC checking/generation and protected B-fields

• Speech and data buffering space for six handsets

• Local call and B-field loop-back

• Two interrupt lines for BML and DSP to interrupt 80C51

• On-chip, three-channel time-multiplexed 8-bit

Analog-to-Digital Converter (ADC) for RSSI measurement, one for battery voltage measurement and one channel available for other purposes

• On-chip 8-bit Digital-to-Analog Converter (DAC) for electronic potentiometer function

• Phase error measurement and phase error correction by hardware

• DACs and ADCs for dynamic earpiece and dynamic or electret microphone

• On-chip reference voltage

• On-chip supply for electret microphone

• Very low ohmic buzzer output

• Serial interface to external ADPCM CODEC (PCD5032)

or 8 kHz u-law samples

• Speech switch for Digital Telephone Answering Machine (DTAM) connected to SPI interface

• IOM-2 interface (Siemens registered trademark)

• Serial interface to synthesizer for frequency

programming

• Programmable polarity and timing of radio-control signals

• GMSK pulse shaper

• Easy interfacing with radio circuits, operating at other

supply voltage (RF supply pin with level shifter for RF signals)

• On-chip comparator for use as data-slicer

• Low power oscillator with integrated frequency

adjustment

• QFP100 and LQFP100 packages

• Power-on-reset

• Programmable power-down modes

• Low supply voltage (2.7 to 3.6 V)

• CMOS technology.

1.1 DSP software features

• ADPCM encoding and decoding complying with G.721

• Volume control

• Speech filters

• Programmable gain in speech paths

• Side tone and soft mute

• Two tone (DTMF) generators

• Automatic gain control

• Hands-free operation

For each DSP software version a separate manual is available in which detailed information is provided on how parameters must be set. For further information please contact Philips Semiconductors.

2 GENERAL DESCRIPTION

The PCD5091 is designed for GAP-compliant handsets with speaker-phone option. It has an embedded 80C51 microcontroller with twice the performance of the classic architecture, 64 kbytes of PROM program memory and 3 kbytes of data memory on-chip. In addition there is 1 kbyte of on-chip data memory that is shared with on-chip Burst Mode Logic (BML) and DSP, the System Data RAM (SDR).

3 ORDERING INFORMATION

TYPE

NUMBER

PCD5091H QFP100 plastic quad ﬂat package; 100 leads (lead length 1.95 mm);

PCD5091HZ LQFP100 plastic low proﬁle quad ﬂat package; 100 leads; body 14 × 14 × 1.4 mm SOT407-1

1997 Jul 21 3

NAME DESCRIPTION VERSION

body 14 × 20 × 2.8 mm

PACKAGE

SOT317-2

Philips Semiconductors Objective speciﬁcation

DECT baseband controller PCD5091

4 BLOCK DIAGRAM

digital pins

analog pins

TST1

TST2

CLK3

DCK

BZP

BZM

EARP

FS1

EARM

LIFP

LIFM

MICP

MICM

VMIC

ref

VANLI

RSSI_AN

VBAT

3 ×

DD5V

DDA

SSA

2 ×

DD3V

5 ×

DD_RF

PORT 3.7

PORT 3.0 to

PORT 2.7

PORT 2.0 to

8 8 8

PORT 1.7

PORT 1.0 to

PORT 0.7

PORT 0.0 to

PORT 3

PORT 1 PORT 2

PORT 0

PCD5091

IB-BUS

80CL51- CORE

(TCB)

TEST CONTROL BLOCK

C-BUS

(256 BYTES)

MICROCONTROLLER-RAM

AUX-RAM

(3 kBYTES)

ROM

(64 kBYTES)

(SPI)

IOM/ADPCM

SPEECH INTERFACE

(ABB)

BUZZER BUFFER

MICROCONTROLLER

INTERFACE (ABCIF)

AB-MICROCONTROLLER

DD_RF

ref

PEAK-HOLD

3 : 1

MUX

ANALOG

SOURCE

VOLTAGE

(AVR)

REFERENCE

(DCA)

ANALOG

(IBC)

RESET

(TICB)

WATCHDOG

XTAL

(CLG)

SUBTRACT

ADC

(AVS)

(POR)

POWER-ON-RESET

(RGE)

GENERATOR

(WDT)

TIMER

(XOSC)

OSCILLATOR

ARA

ARF

ARD

1-BIT ADC

DDA

108f

(DNS)

NOISE

DIGITAL

LEVEL

SHIFTER

SHAPER

BURST

DIGITAL

MODE

LOGIC

(DSP)

SIGNAL

PROCESSOR

RAM

DATA

SYSTEM

(BML)

DIGITAL

AMP

Σ ∆

ATS

1-BIT ADC

108f

(DDF)

FILTER

DECIMATING

(SDR)

(1 kBYTE)

CDC-on

DDA

CODEC

AGM

AUXILIARY ADC (AAD)

DDA

DIGITAL

CONTROL

ISB BUS

CONTROLLER

BLOCK

TIMING CONTROL

CLOCK

GENERATOR

ref

ANALOG VOLTAGE

MGD800

VANLO

EN_WATCHDOG RESET_OUT M_RESET VBGP

SSO

DDO

handbook, full pagewidth

Fig.1 Block diagram.

PSE

ALE

A16

R_PWR

R_ENABLE

SLICE_CTR

REF_CLK

S_ENABLE

SYNTH_LOCK

S_CLK

S_DATA

S_PWR

VCO_BND_SW

1997 Jul 21 4

ANT_SW1

ANT_SW0

T_ENABLE

T_DATA

R_DATAP

R_DATAM

T_PWR_RMP

R_SLICED

T_GMSK

GP_CLK7

DPLL_DATA

XTAL1

XTAL2

CLK100

Philips Semiconductors Objective speciﬁcation

DECT baseband controller PCD5091

5 PINNING INFORMATION

5.1 Pinning

handbook, full pagewidth

T_ENABLE

T_PWR_RMP

VCO_BND_SW

SYNTH_LOCK

S_ENABLE

SLICE_CTR

R_ENABLE

ANT_SW1 ANT_SW0

CLK100

T_DATA

T_GMSK

S_DATA

S_CLK

S_PWR

REF_CLK

SS1

DD_RF

DD3V_1

R_PWR

R_DATAP

R_DATAM

RSSI_AN

VANLI

VBAT

CLK3

DCK

FS1

RESET_OUT

M_RESET

P0.0

P0.1

P0.2

P0.3

P0.4

P0.5

99989796959493929190898887868584838281

100

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17 18 19

20 21 22 23 24 25 26 27

28 29 30

P0.6

P0.7

PCD5091

DD5V_3VSS5

ALE

PSE

P2.7

P2.6

P2.5

P2.4

P2.3

TST2

TST1

V V

A16

76 75

P2.2 P2.1

P2.0

P3.7

72 71

P3.6 P3.5

P3.4

P3.3

68 67

P3.2 P3.1

P3.0

BZP

BZM

60 59

P1.7 P1.6

P1.5

P1.4

56 55

P1.3 V

R_SLICED

DPLL_DATA

GP_CLK7

SS4 DD5V_2

SS3 SS2

DD3V_2

DD5V_1

31323334353637383940414243444546474849

XTAL2

XTAL1

SSO

VANLO

DDO

LIFM

LIFP

SSA

MICM

Fig.2 Pin configuration (QFP100).

1997 Jul 21 5

MICP

VMIC

MBH938

ref

DDA

VBGP

EARM

P1.0

EARP

EN_WATCHDOG

P1.1

P1.2

+ 11 hidden pages

Philips pcd5091 DATASHEETS

CONTENTS

1 FEATURES

1.1 DSP software features

2 GENERAL DESCRIPTION

3 ORDERING INFORMATION

4 BLOCK DIAGRAM

5 PINNING INFORMATION

5.1 Pinning