Philips PAR20 User Manual

Philips Halogen PAR20 Electronic Lamps

Ideal for accent lighting in retail, hospitality and commercial buildings

ENERGY SAVING

Energy savings in a small reflector

Philips Halogen PAR20 Electronic Lamp. Replace your 50W halogen PAR20 with the new energy saving 20W PAR20 electronic to enjoy 30W in energy savings and up to twice the life*.

Energy savings

• Provides 30W savings and up to twice the life compared to a standard 50W halogen PAR20 lamp

5000 hours rated average life

Available in 25˚ flood and 10˚ spot

Excellent quality of light

• Efficient low-voltage halogen burner

• Philips designed optics for optimal accent light

Consists of a low voltage halogen burner and integrated transformer in a PAR20 envelope

* Based on a standard 50W halogen PAR20 with a rated average life of 2500 hours vs. a

Philips 20W halogen PAR20 electronic with a r ated average life of 5000 hours.

1) See back page for footnote.

Philips Halogen PAR20 Electronic Lamps

Ordering, Electrical and Technical Data

Product Ordering Pack. Bulb Avg.Life Approx. CCT MOL Number Code Watts Volts Qty. Description Type Base (Hrs.)

15216-5 PAR20E/FL25 20 120 12 Flood 25˚ PAR20 Medium 5000 1200 100 2900 3 40494-7 PAR20E/SP10 20 120 12 Spot 10˚ PAR20 Medium 5000 6500 100 2900 35⁄16

Rated

MBCP2CRI (K) (In.)

⁄16

Shipping Data

Product SKU UPC Bar Code Case Weight Cube Pallet Per Layers SKU Dimensions Case Dimensions Pallet Dimensions Number (0-46677) (5-00-46677) Qty. (lbs.) (cu. ft.) Qty. Layer High (W x D x H) (In.) (W x D x H)(In.) (W x D x H)(In.)

15216-5 15216-1 15216-6 12 4.1 0.32 1080 180 10 2.36 x 2.36 x 3.74 9.84 x 12.44 x 4.57 47.17 x 39.37 x 33.31 40494-7 40494-9 40494-4 12 4.1 0.32 1080 180 10 2.36 x 2.36 x 3.74 9.84 x 12.44 x 4.57 47.17 x 39.37 x 33.31

1) Rated average life is the length of operation (in hours) at which point an average of 50% of the lamps will still be operational and 50% will not.

2) Maximum Beam Candlepower

To avoid deter ioration of lampholder by heat, use only heat resistant lampholders or fixtures listed by a nationally recognized electrical testing organization for use with reflector or PAR lamps.

NOTICE:Before using bulb, see oper ating instructions on inside flap. Adherence to the operating instructions will reduce the risk of personal injury or fire.

CAUTION: The filament capsule contained inside this glass bulb is pressurized,operates at high temperature and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or the surrounding environment, thereby creating a risk of personal injury or fire.

Above specifications subject to change without notice.

Outer Case Case SKUs

OPERATING INSTRUCTIONS:Before replacing, turn off power and let lamp cool to avoid electrical shock or burn.

— For indoor or outdoor use. A weather-protected fixture is recommended for wet locations.

— Suitable for use in open fixtures.

— Do not exceed the maximum wattage r ating of the fixture.

— Do not use if outer glass is scr atched or broken since it may break dur ing operation or removal.

— If outer glass breaks the lamp may continue to light, however, immediately discontinue use.

— Due to the heat that radiates from the bulb, do not use in close proximity to combustible mater ials

or objects susceptible to drying or fading.

— Manage in accord with disposal laws.

— MAXIMUM ALLOWABLE TEMPERATURE: To prevent over heating of the electronic circuit inside,

the case temperature ,T

must not exceed 100˚C .

Energy saving example

Estimated Lighting Costs Using a Standard 50W Halogen PAR20

Present Wattage 50W x Annual operating hours 3,000

= 150,000 watts per year ÷ 1,000 = 150 kWh per year x kWh rate of $.10 = $15 per year x 100 lamps per space = $1,500

annual energy cost per space

Lighting Costs Using the Philips 20W Halogen PAR20 Electronic

Wattage 20W x Annual operating hours 3,000

= 60,000 watts per year ÷ 1,000 = 60 kWh per year x kWh rate of $.10 = $6 per year x 100 lamps per space = $600

annual energy cost per space

Total Estimated Annual Savings = $900

Based on 100 lamps per space operating 3,000 hours per year

This energy saving example shows an application of 100 lamps in a space currently using standard 50W PAR20 lamps, operating 3,000 hours per year at a cost of $.10 per kWh.

As you can see, replacing 100 standard halogen 50W PAR 20 lamps with the Philips halogen PAR20 electronic lamps (with similar candlepower) can provide significant energy cost savings of possibly $900 per year! Potential savings from the reduction in HVAC costs as a result of using a lower wattage lamp that emits less heat is an additional benefit that was not included in this example.

Upgrade your lighting using the PAR20 Electronic

Standard Halogen

PAR20

50W

*Savings based on $.10 kWh at 3000 operating hours annually compared to lamps with similar light output.

P-5888-B

www.philips.com

Printed on chlorine free paper from Sappi Fine Paper mills, who are accredited with EMAS environmental certification. Sappi claims that the pulp used in the manufacture of Magno Dull paper is derived from environmentally certified forests.

PAR20 Electronic

replace with

20W

Halogen PAR20 Electronic

Energy Savings

save

Philips Lighting Company 200 Franklin Square Drive P.O. Box 6800 Somerset, NJ 08875-6800 1-800-555-0050

A Division of Philips Electronics North America Corporation

30W

Energy Savings

in dollars

results in

$9.00

Lifetime

enjoy up to

Philips Lighting 281 Hillmount Road Markham, Ontario Canada L6C 2S3 1-800-555-0050

A Division of Philips Electronics Ltd.

Increased