Philips NE5512, SE5512, SA5512 User Manual
Philips Semiconductors Linear Products Product specification
NE/SA/SE5512Dual high-performance operational amplifier
78
August 31, 1994 853-0948 13721
DESCRIPTION
The 5512 series of high-performance operational amplifiers provides
very good input characteristics. These amplifiers feature low input
bias and voltage characteristics such as a 108 op amp with
improved CMRR and a high differential input voltage limit achieved
through the use of a bias cancellation and PNP input circuits with
collector-to-emitter clamping. The output characteristics are like
those of a 741 op amp with improved slew rate and drive capability,
yet have low supply quiescent current.
APPLICATIONS
•AC amplifiers
•RC active filters
•Transducer amplifiers
•DC gain block
•Battery operation
•Instrumentation amplifiers
FEATURES
•Low input bias < ±20nA
•Low input offset current < ±20nA
•Low input offset voltage <1mV
•Low VOS temperature drift 5µV/°C
•Low input bias temperature drift 40pA/°C
•Low input voltage noise 30nV/√Hz
•Low supply current 1.5mA/amp
•High slew rate 1.0V/µs
•High CMRR 100dB
PIN CONFIGURATIONS
N Package
D Package
1
NOTE:
1.The D package pinout is not functionally identical
to the N pinout.
8
7
6
54
3
2
1OUTPUT 1
-INPUT 1
+INPUT 1
V-
V+
OUTPUT 2
-INPUT 2
+INPUT 2
8
7
6
54
3
2
1+ INPUT 1
-INPUT 2
+INPUT 2
V-
V+
OUTPUT 1
-INPUT 1
OUTPUT 2
TOP VIEW
TOP VIEW
1
2
•High input impedance 100MΩ
•High PSRR 110dB
•High differential input voltage limit
•No crossover distortion
•Indefinite output short circuit protection
•Internally-compensated for unity gain
•600Ω drive capability
•MIL-STD processing available
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
8-Pin Plastic Small Outline (SO) Package 0 to 70°C NE5512D 0174C
8-Pin Plastic Dual In-Line Package (DIP) 0 to 70°C NE5512N 0404B
8-Pin Plastic Small Outline (SO) Package -40 to +85°C SA5512D 0174C
8-Pin Plastic Dual In-Line Package (DIP) -40 to +85°C SA5512N 0404B
8-Pin Plastic Dual In-Line Package (DIP) -55 to +125°C SE5512N 0404B
Philips Semiconductors Linear Products Product specification
NE/SA/SE5512Dual high-performance operational amplifier
August 31, 1994
79
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
V
CC
Supply voltage ±16 V
P
D MAX
Maximum power dissipation,
TA=25°C (still air)
1
N package 1212 mW
D package 800 mW
T
A
Operating ambient temperature range
NE5512 0 to +70 °C
SA5512 -40 to +85 °C
SE5512 -55 to +125 °C
T
STG
Storage temperature range -65 to +150 °C
T
SOLD
Lead soldering temperature (10sec max) 300 °C
NOTES:
1. The following derating factors should be applied above 25°C
N package at 9.7mW/°C
D package at 6.4mW/°C
Loading...