Philips MJ5 User Manual

MJ5 Exit Signs MJ5

Page 1 of 1 Chicago Exit Signs

Fluorescent or optional incandescent lamp AC-only and emergency exit models meet Chicago requirements. Rugged steel signs for wall, ceiling or end mount applications.

Standard Exit Combination Model (DEH option)

A B C D E

12.75” 9.5” 14.5” 2.5” 26.25”

32.4cm 24.1cm 36.8cm 6.4cm 66.7cm

How to Specify:

MJ5

SERIES MODE OF # OF LETTER EXIT FACE OPER ATION FACES COLOR DESIGNATOR

MJ5 =Chicago Exit

Features

1. Illumination: AC Light Source: Standard exit face illumination is provided

by two 7 watt PL type fluorescent lamps. Letter brightness and illumination uniformity exceed UL requirements with both incandescent and fluorescent models. Emergency Light Source: Exit illumination in all models is provided by two 6 volt, 5.4 watt wedge base incandescent DC lamps. MJ5E-DEH combination models with side mounted lighting heads are provided with 6 volt, 12 watt halogen bi-pin lamps.

2. Housing: MJ5 Series exits are constructed of heavy duty steel finished in white baked-on powder paint providing scratch and corrosion resistance. Exit face features 6” letters with 3/4” stroke on translucent glass panels and Full length directional arrows to meet City of Chicago visibility requirements. Mounting canopy is standard.

3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-state circuitr y. Fully automatic, temperature compensating, variable rate float charging system is complete with low voltage disconnect, AC lockout, brownout protection, AC indicator lamp and test switch.

4. Batter y: Maintenance-free, sealed, lead calcium batter y has an estimated service life of 5 years, and an operating temperature range of 65°F (19°C) to 85°F (30°C).

5. Input Power Requirements: AC Only: 19W; Emergency Operation: 29W

6. Warranty: Unit: (excluding lamps) 3-years full coverage against defects

in materials and workmanship from date of shipment. Battery: 3 years full warranty plus an additional 7 years of pro-rata coverage

A = AC Only Exit E = Emergenc y Opera tion E xit

1 = Single face 2 = Double face

RW = Red on White

Single Face Models

3 = EXIT (No Arrow) 6 = EXIT (Right Arrow) 9 = EXIT (Left Arrow) 12 = EXIT (Double Arrow) 2 = STAIRS (No Arrow) 5 = STAIRS (Right Arrow) 8 = STAIRS (Left Arrow) 11 = STAIRS (Double Arrow)

Double Face Models

18 = EXIT (No Arrow) 21 = EXIT (Right or 24 = EXIT (Double Arrow) 17 = STAIRS (No Arrow) 20 = STAIRS (Right or Left Arrow) 23 = STAIRS (Double Arrow)

Options

DEH = Combination Model w/ Side Mounted Par 36 12W Halogen Heads 277 = 277VAC, 60Hz. Input (AC models only) SW = Special Wording (consult factory) SX = Self-Diagnostic Circuit (emergency models only) IA = Audible Intermittent Alarm (emergency models only) IV = Visual Intermittent Alarm (emergency models only) FA = Fire Alarm Panel Interface INC = Two candelabra base 15T6 120 volt, 15 watt incandescent AC lamps.

Accessories

MJSKW = 18” Stem Mounting Kit (white) MJSKB = 18” Stem Mounting Kit (black) MJPG9 = Wire Guard - Wall Mount (AC and emergency models) MJPG10 = Wire Guard - Wall Mount (combination models)

Job Information Type:

Job Name:

Cat. No.:

Code Compliance

All models are UL Listed and meet NFPA 101 Life Safety Code, NEC, OSHA and City of Chicago codes. Emergency models are UL924 Listed.

Lightolier is a Philips group brand

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.