Philips Microcadena DVD por componentes User Manual [en, de, es, fr, it]

www.philips.com/welcome

MCD712

EN User manual

DA Brugervejledning

DE Benutzerhandbuch

ES Manual del usuario

FR Mode d’emploi

IT Manuale utente

NL Gebruiksaanwijzing

SV Användarhandbok

Contents

1 Important 4

Safety 4 Notice 6

7 Tune to FM radio stations 25

Program radio stations automatically 25 Program radio stations manually 25 Tune to a preset radio station 25 Set RDS clock 25 Show RDS information 26

English

2 Your DVD Micro Theater 8

Introduction 8 What’s in the box 8 Overview of the main unit 9 Overview of the remote control 10

3 Connect 12

Place the unit 12 Connect speakers 12 Connect FM antenna 12 Connect TV 13 Connect power 14

4 Get started 15

Prepare the remote control 15 Set clock 15 Turn on 15 Find the correct viewing channel 16 Select the correct TV system 16 Change system menu language 16 Turn on Progressive Scan 16

5 Play 18

Play a disc 18 Play from USB 19 Play DivX video 19 Play MP3/WMA/picture ﬁ les 19 Play control 20 Play options 20 Picture view options 21

8 Adjust volume level and sound effect

27 Adjust volume level 27 Select a sound effect 27 Mute sound 27 Listen through headphone 27

9 Other features 28

Activate demonstration mode 28 Adjust brightness of display panel 28 Set the alarm timer 28 Set the sleep timer 28 Connect other devices 28

10 Product information 30

Speciﬁ cations 30 Supported disc formats 31 USB playability information 31 RDS program types 32

11 Troubleshooting 33

6 Adjust settings 22

General setup 22 Audio setup 22 Video setup 23 Preference setup 23

1 Important

Safety

This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of ﬁ re or electric shock, this apparatus should not be exposed to rain or moisture and objects ﬁ lled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Important Safety Instructions

a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

h Do not install near any heat sources

such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

i Protect the power cord from being

walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

j Only use attachments/accessories

speciﬁ ed by the manufacturer.

k Use only with the cart, stand, tripod,

bracket, or table speciﬁ ed by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

l Unplug this apparatus during lightning

storms or when unused for long periods of time.

m Refer all servicing to qualiﬁ ed service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

n Battery usage CAUTION – To prevent

battery leakage which may result in bodily injury, property damage, or damage to the unit:

Install all batteries correctly, + and - • as marked on the unit. Do not mix batteries (old and new • or carbon and alkaline, etc.). Remove batteries when the unit is • not used for a long time.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

the apparatus (e.g. liquid ﬁ lled objects, lighted candles).

q This product may contain lead and

mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

Safety-Important notes for users in the U.K.

Mains plug

This apparatus is ﬁ tted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 5

Amp, A.S.T.A. or BSI approved type.

c Reﬁ t the fuse cover.

If the ﬁ tted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug ﬁ tted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed off to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal • marked N or coloured black. Connect the brown wire to the terminal • marked L or coloured red. Do not connect either wire to the earth • terminal in the plug, marked E (or

) or

coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. see Copyright Act 1956 and The performer’s Protection Acts 1958 to

1972.

Caution

Use of controls or adjustments or • performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Warning

Where the MAINS plug or an appliance • coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this unit. • Never lubricate any part of this unit.• Place this unit on a ﬂ at, hard and stable • surface. Never place this unit on other electrical • equipment. Only use this unit indoors. Keep this unit away • from water, moisture and liquid-ﬁ lled objects. Keep this unit away from direct sunlight, naked • ﬂ ames or heat. Never look into the laser beam inside the unit.•

English

Hearing safety

Listen at a moderate volume.

Using headphones at a high volume can • impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your • hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.

To establish a safe volume level:

Set your volume control at a low setting. • Slowly increase the sound until you can • hear it comfortably and clearly, without distortion.

Listen for reasonable periods of time:

Prolonged exposure to sound, even • at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment • reasonably and take appropriate breaks.

Be sure to observe the following guidelines when using your headphones.

Listen at reasonable volumes for • reasonable periods of time. Be careful not to adjust the volume as • your hearing adapts. Do not turn up the volume so high that • you can’t hear what’s around you. You should use caution or temporarily • discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a trafﬁ c hazard and is illegal in many areas.

Notice

This product complies with the radio interference requirements of the European Community. Any changes or modiﬁ cations made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

This apparatus includes this label:

Note

English

The making of unauthorized copies of copy-protected material, including computer programs, ﬁ les, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.

Ofﬁ cal DivX® Certiﬁ ed product. Plays all versions of DivX with standard playback of DivX

video (including DivX® 6)

media ﬁ les.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation.

The type plate is located on the bottom of the • apparatus.

Norge

Typeskilt ﬁ nnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke

2 Your DVD

You can play DVD discs with the following region codes:

Micro Theater

Congratulations on your purchase, and welcome to Philips! To fully beneﬁ t from the support that Philips offers, register your product at www.Philips.com/welcome.

Introduction

With this unit, you can:

watch video from DVD/VCD/SVCD or • USB devices enjoy audio from discs or USB devices• view pictures from discs or USB devices• Listen to FM radio•

You can enrich sound output with these sound effects:

Digital Sound Control (DSC)• Dynamic Bass Boost (DBB)•

The unit supports these media/disc formats:

DVD region code Countries

Europe

What’s in the box

Check and identify the contents of your package:

Main unit•

2 speakers (cable length: 1.5m)•

Remote control with battery•

Composite video cable (yellow)•

FM wire antenna•

User manual•

Quick star t guide•

ReWritable

Recordable

Overview of the main unit

a b c ed f g h

mn jl ik

a STANDBY-ON/ECO POWER

Turn on the apparatus or switch to • the Eco Power standby mode.

b Remote control sensor c Display panel

Display current status.•

Skip to the previous/next track.• Skip to the previous/next title or • chapter. Tune to a radio station.•

e DSC

Select a preset sound setting.•

f PRESET +/-

Select a preset radio station.•

g SOURCE

Select a source.•

Start or pause play.•

English

Stop play.• Erase a program.• In demo mode, activate or deactivate • demonstration.

j VOLUME -/+

Adjust volume.• Adjust time.•

Open or close the disc • compartment.

l Disc compartment m

Headphone socket.•

USB socket.•

Overview of the remote control

w v

t s

Turn on the apparatus or switch to • the Eco Power standby mode.

b Source selection keys

Select a source.•

d e

m n

c DISPLAY/RDS

Display play information on a • connected TV. For selected FM radio stations: • display RDS information.

d CLOCK

Set the clock.•

e SLEEP/TIMER

Set the sleep timer.• Set the alarm timer.•

Search within a track.• Tune to a radio station.• For menus, navigate left/right.• Move an enlarged picture left/right.• Rotate or invert pictures.•

SLOW / ZOOM

For menus, navigate up/down.• Rotate or invert pictures.• (•

SLOW) For video: select a slow

play mode. (•

ZOOM) For video: zoom in/out.

h DISC MENU

For video discs: access or exit the • disc menu. For video discs with playback • control(PBC): turn on/off PBC.

i VOL +/-

Adjust volume.• Adjust time.•

j DSC

Select a preset sound setting.•

k LOUDNESS /DBB

Turn on or off automatic loudness • adjustment. Turn on or off dynamic bass • enhancement.

l AUDIO

For VCD, select stereo, mono-left or • mono-right channel. For DVD/DivX video, select an audio • language.

m SUBTITLE

Select a subtitle language.•

n GOTO

During disc play, specify a position to • start play.

o ANGLE/PROG

Select a DVD camera angle.• Program tracks.• Program titles/chapters for DVD play.• Program radio stations.•

p Numeric keypad

Select a title/chapter/track directly.•

q MUTE

Mute or restore volume.•

Skip to the previous/next track.• Skip to the previous/next title or • chapter. Select a preset radio station.•

Stop play.• Erase a program.•

t SYSTEM MENU

Access or exit the system setup • menu.

u OK /

Conﬁ rm a selection.• Start or pause play.•

v A-B

Repeat a speciﬁ c section within a • track/disc.

w OPEN/CLOSE

Open or close the disc • compartment.

x MODE/DIM

Select repeat play modes.• Select shufﬂ e play modes.• Select a brightness level for the • display screen.

English

3 Connect

Place the unit

1 Place the unit near to the TV. 2 Place the left and right speakers at equal

distance from the TV and at an angle of approximately 45 degrees from the listening position.

Note

To avoid magnetic interference or unwanted • noise, never place this apparatus and speakers too close to any radiation devices. Never place this unit in an enclosed cabinet.• Install this unit near the AC outlet where the • AC power plug can be easily reached.

Connect speakers

Note

Ensure that the colors of the speaker wires and • terminals are matched. For optimal sound, use the supplied speakers • only. Connect only speakers with impedance that is • the same or higher than the supplied speakers. Refer to the Speciﬁ cations section of this manual.

2 Insert the stripped part of the wire

completely.

Inser t the right speaker wires to “ • R”, left speaker wires to “ L”. Inser t the red wires to “ • +”, black wires to “ -”.

3 Release the socket ﬂ ap.

abc

Connect FM antenna

Tip

For optimal reception, fully extend and adjust • the position of the antenna. For better FM stereo reception, connect an • outdoor FM antenna to the FM AERIAL jack. The unit does not support MW radio • reception.

1 Connect the supplied FM wire antenna to

the FM AERIAL socket on the unit.

1 Hold down the socket ﬂ ap.

Connect TV

Connect video cables

With this connection, you can watch video from the unit on the TV screen. You can select the best video connection that your TV supports.

Option 1: Connect through SCART (for a • standard TV). Option 2: connect through component • video (for a standard TV or Progressive Scan TV). Option 3: connect through S-Video (for a • standard TV). Option 4: connect through composite • video (CVBS) (for a standard TV).

Option 1: Connect through SCART

Option 2: Connect through component video

Connect a progressive scan TV through component video for higher quality video.

Pr/Cr Pb/Cb Y

COMPONENT VIDEO IN PUT

English

1 Connect a scart cable (not supplied) to:

the • SCART socket on this unit. the • SCART socket on the TV.

Note

The progressive scan video quality is only • available when a progressive scan TV is connected. If your TV does not support progressive scan, • you cannot view the picture. For how to activate progressive scan on your • TV, refer to the TV user manual.

Connect a progressive scan TV through component video for higher quality video.

1 Connect component video cables (red/

blue/green - not supplied) to:

the • VIDEO OUT ( Pr/Cr Pb/Cb Y) sockets on this unit. the component input sockets on the • TV.

Option 3: Connect through S-Video

Connect audio cables

S-VIDEO IN

1 Connect an S-video cable (not supplied)

to:

the • S-Video socket on this unit. the • S-Video socket on the TV.

Option 4: Connect through composite video

L AUDIO OUT R

1 To play sound from the TV through this

unit, connect audio cables (red/white -

not supplied) to:

the • AUX IN L/R sockets on this unit. the audio output sockets on the TV.•

Connect power

1 Connect the supplied composite video

cable to:

the • VIDEO OUT socket on this unit. the video input socket on the TV.•

Caution

Risk of product damage! Ensure that the • power supply voltage corresponds to the voltage printed on the back or the underside of the unit. Before connecting the AC power cord, ensure • you have completed all other connections.

1 Connect the AC power cord to the wall

socket.

4 Get started

Set clock

Caution

Use of controls or adjustments or • performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from • heat, sunshine or ﬁ re. Never discard batteries in ﬁ re.

For ﬁ rst-time use:

1 Remove the protective tab to activate the

remote control battery.

To replace the remote control batteries:

1 Open the battery compartment. 2 Insert one lithium CR2025 battery with

correct polarity (+/-) as indicated.

3 Close the battery compartment.

1 In the Eco Power standby mode, press

and hold CLOCK to activate the clock

setting mode.

The hour digits are displayed and begin » to blink.

2 Press + VOL - to set the hour, then press

CLOCK again..

The minute digits are displayed and » begin to blink.

3 Press + VOL - to set the minute. 4 Press CLOCK to conﬁ rm the clock

setting.

Turn on 1 Press .

The unit switches to the last selected » source.

Switch to Eco Power standby mode

1 Press to switch the unit to Eco Power

Standby mode.

The backlight on the display panel » turns off.

The blue Eco Power indicator turns on.»

Tip

In the Eco Power mode, you can press • CLOCK to switch to the standby mode and view the clock (if set). If the system remains in the standby mode for • more than 90 seconds, it switches to the Eco Power mode automatically.

English

Note

Before you press any function button on the • remote control, ﬁ rst select the correct source with the remote control.

Find the correct viewing channel

Change system menu language

1 Press to turn on the unit. 2 Press DISC to switch to disc mode. 3 Turn on the TV and switch to the correct

video-in channel in one of the following ways: Go to the lowest channel on your TV, • then press the Channel Down button until you see the Philips screen. Press the source button repeatedly on • the remote control of your TV.

Tip

The video-in channel is between the lowest • and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the TV.

Select the correct TV system

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

1 Press SYSTEM MENU. 2 Select [Preference Page]. 3 Select [TV Type] and then press . 4 Select a setting and then press OK / .

• [PAL] - For TV with PAL color

system.

• [Multi] - For TV that is compatible

with both PAL and NTSC.

• [NTSC] - For TV with NTSC color

system.

5 To exit the menu, press SYSTEM MENU.

1 Press SYSTEM MENU. 2 Select [General Setup Page]. 3 Select [OSD Language] and then press

4 Select a setting and then press OK / . 5 To exit the menu, press SYSTEM MENU.

Turn on Progressive Scan

Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. Before you turn on this feature, ensure that:

The TV supports progressive scan signals.•

You have connected this unit with the TV •

through component video.

1 Turn on the TV. 2 Ensure that the TV progressive scan

mode is deactivated (see the TV user

manual).

3 Switch the TV to the correct viewing

channel for this unit.

4 Press DISC. 5 Press SYSTEM MENU. 6 Press / to select [Video Setup Page]

in the menu, then press

7 Select [Component] > [Pr/Cr Pb/Cb Y],

then press OK /

8 Select [TV Mode] > [Progressive], then

press OK /

A warning message is displayed.»

9 To proceed, select [Ok] and press OK /

The progressive setup is complete.»

Note

If a blank/distorted screen is displayed, wait • for 15 seconds for auto recover y or turn off progressive scan manually.

10 Turn on the progressive scan mode on

the TV.

Turn off progressive scan manually

1 Turn off the progressive scan mode on

the TV.

2 Press SYSTEM MENU to exit the menu. 3 Press DISC followed by numeric key “1”

to turn off the progressive scan mode on the unit.

The blue Philips DVD background » screen is displayed.

Note

In the progressive mode, if you press • DISC followed by numeric key “1” during normal play, the progressive scan mode will be turned off on the unit.

English

5 Play

Use the disc menu

When you load a DVD/(S)VCD disc, a menu may be displayed on the TV screen.

Note

With some disc/ﬁ le types, play may differ.•

Play a disc

Caution

Never look at the laser beam inside the unit.• Risk of product damage! Never play discs with • accessories such as disc stabilizer rings or disc treatment sheets. Never put any objects other than discs into • the disc compartment.

1 Press DISC to select the DISC source. 2 Press OPEN/CLOSE.

The disc tray opens.»

3 Place a disc onto the tray and press

OPEN/CLOSE.

Ensure that the label faces up.»

4 Play starts automatically.

To stop play, press • To pause or resume play, press • OK /

. To skip to the previous/next title/• chapter/track, press

/ .

To access or exit the menu manually:

1 Press DISC MENU.

For VCD with PlayBack Control (PBC) feature (version 2.0 only):

With the PBC feature, you can play VCD interactively according to the menu screen.

1 During play, press DISC MENU to

enable/disable PBC.

When PBC is enabled, the menu » screen is displayed.

When PBC is disabled, normal play is » resumed.

Select an audio language

You can select an audio language on DVDs or DiVx video.

1 During disc play, press AUDIO.

The language options appear. If the » selected audio channels is unavailable, the default disc audio channel is used.

Note

For some DVDs, the language can only be • changed from the disc menu. Press DISC

MENU to access the menu.

If play does not start automatically:

Select a title/chapter/track and then press • OK /

To play a locked DVD, enter the 4-digit • parental control password.

Tip

Select a subtitle language

You can select a subtitle language on DVDs or

DivX

discs.

During play, press • SUBTITLE.

Tip

For some DVDs, the language can only be • changed from the disc menu. Press DISC

MENU to access the menu.

Play from USB

Note

Ensure that the USB device contains playable • music, pictures or video.

3 Select a ﬁ le to play and press OK / .

To stop play, press • To pause or resume play, press • OK /

To change a subtitle language, press • SUBTITLE.

English

1 Insert the USB device.

2 Press USB to select the USB source. 3 Press / to select a folder, then press

OK /

to conﬁ rm.

4 Press / to select a ﬁ le from the folder. 5 Press OK / to star t play.

To stop play, press • To pause or resume play, press • OK /

. To skip to the previous/next ﬁ le, • press

/ .

To return to the upper-level menu, • press DISC MENU, then press OK to conﬁ rm.

Play DivX video

You can play DivX ﬁ les copied onto a CD-R/ RW, recordable DVD or USB device.

1 Insert a disc or connect a USB device. 2 Select a source:

For discs, press • DISC. For USB devices, press • USB.

Note

You can only play DivX videos rented or • purchased through the DivX registration code of this unit. Subtitle ﬁ les with the following ﬁ lename • extensions (.sr t, .smi, .sub, .ssa, .ass) are supported but do not appear on the ﬁ le navigation menu. The subtitle ﬁ lename has to be the same as • the ﬁ le name of the video.

Play MP3/WMA/picture ﬁ les

You can play MP3/WMA/picture ﬁ les copied onto a CD-R/RW, recordable DVD or USB device.

1 Insert a disc or connect a USB device. 2 Select a source:

For discs, press • DISC. For USB devices, press • USB.

3 Press / to select a folder, then press

OK /

to conﬁ rm.

4 Press / to select a ﬁ le from the folder. 5 Press OK / to star t play.

To stop play, press • To pause or resume play, press • OK /

. To skip to the previous/next ﬁ le, • press

/ .

To return to the upper-level menu, • press DISC MENU, then press OK to conﬁ rm.

Play control

Select repeat/shufﬂ e play options

1 During play, press MODE/DIM repeatedly

to select a repeat option or the shufﬂ e play mode.

To resume normal play, press • MODE/DIM repeatedly until no option is displayed.

Resume video play from last stopped point

Note

This feature is only available for DVD/VCD • play.

1 In stop mode and when the disc has not

been removed, press OK /

Repeat A-B (DVD/VCD/CD/MP3/ WMA)

1 During music or video play, press A-B at

the start point.

2 Press A-B at the end point.

The selected section starts to play » repeatedly.

To cancel repeat play, press • A-B again.

Note

The section A and B can be set only within the • same track/title.

Search forward/backward

1 During play, press / repeatedly to

select a search speed.

To resume play at normal speed, • press OK /

Search by time or chapter/track number

1 During video/audio play, press GOTO

until a time ﬁ eld or chapter/track ﬁ eld is displayed.

For the time ﬁ eld, enter the play • position in hours, minutes and seconds. For the chapter/track ﬁ eld, enter the • chapter/track. Play starts automatically at your • selected point.

To cancel resume mode and stop play completely:

1 In stop mode, press .

Play options

Display play information

1 During play, press DISPLAY/RDS

repeatedly to display play information.

Program

Note

You cannot program picture ﬁ les/discs.•

For video discs/audio CDs:

1 In stop mode, press ANGLE/PROG to

access the program menu.

2 Enter the tracks/chapters to add to the

program.

3 Repeat step 2 until the program is

complete.

4 Select [Start], then press OK / to

play the program.

For Divx/MP3/WMA ﬁ les:

1 Select a ﬁ le, then press ANGLE/PROG to

add the ﬁ le to the program list.

2 Repeat step 1 until the program is

complete.

3 In stop mode, press DISC MENU until

the program list is displayed.

4 Press OK / to play the program.

To delete a ﬁ le from the [Program List]:

1 Press DISC MENU until the program list

is displayed.

2 Select a ﬁ le, then press ANGLE/PROG to

delete the ﬁ le from the program list.

Select a camera angle

Note

This feature is only available for DVDs • recorded with multiple camera angles.

1 During play, press ANGLE/PROG

repeatedly to select a camera angle.

English

Zoom in/out image

1 During video play, press ( ZOOM)

repeatedly to zoom in/out the image.

When the image is zoomed in, you • can press image.

/ to pan through the

Slow-motion play

1 During video play, press ( SLOW)

repeatedly to select a slow play option.

The sound is muted.» To resume play at normal speed, press »

Change the audio channel

Note

This feature is only available for VCD/DivX • play.

1 During play, press AUDIO repeatedly to

select an audio channel available on the disc:

Mono Left• Mono Right• Stereo•

Picture view options

Preview pictures

1 During play, press .

The thumbnails of 12 pictures are » displayed.

2 Select one of the following:

a picture• the slide show option• the menu option• the next/previous page (if available)•

3 Press OK to:

play the selected picture• start slide show of all pictures• enter the menu where each remote • key function is explained turn to the next/previous page (if • available)

Select a slide show play mode

1 During play, press ANGLE/PROG

repeatedly to select a slide-show play mode.

Rotate picture

1 During play, press / / / to rotate

the picture anti-clockwise/clockwise.

6 Adjust settings

1 Press SYSTEM MENU. 2 Select a setup page. 3 Select an option and then press . 4 Select a setting and then press OK / .

To return to the previous menu, • press To exit the menu, press • SYSTEM MENU.

[DIVX (R) VOD]

Display the DivX

Tip

Enter this DivX registration code when you • rent or purchase video from http://vod.divx. com/. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

registration code.

Audio setup

General setup

On [General Setup Page], you can set the following options:

[TV Display]

The TV format determines the aspect ratio of display according to the type of TV you have connected.

4:3 Pan Scan (PS)

• [4:3 Pan Scan] – For 4:3 screen TV: full-

height display with the trimmed sides.

• [4:3 Letter Box] – For 4:3 screen TV:

wide-screen display with black bars on the top and bottom of the screen.

• [16:9] – For wide-screen TV: display ratio

16:9.

[OSD Language]

Select the preferred language for on-screen display.

[Screen Saver]

The screen saver protects the TV screen damage due to prolonged exposure to a static image.

• [On] – Enable the screen saver.

• [Off] – Disable the screen saver.

4:3 Letter Box (LB)

16:9 (Wide Screen)

On [Audio Setup Page], you can set the following options:

[Digital Audio Setup] > [Digital Audio Setup Page] > [Digital Output]

Select audio formats supported by the connected device.

• [Off] – Turn off the digital output.

• [All] – If the connected device supports

multi-channel audio formats, select this option.

• [PCM Only] – If the connected device

cannot decode multichannel audio, select this option.

[Dolby Digital Setup] > [Dual Mono] Select audio signals output to speakers.

• [Stereo] – Output multichannel sound

signals to both speakers.

• [L-Mono] – Output left mono sound

signals to both speakers.

• [R-Mono] – Output right mono sound

signals to both speakers.

[3D] > [3D Processing Page] > [Reverb Mode]

Select a vir tual surround sound mode.

[HDCD] > [HDCD Setup Page] > [Filter] When you play a HDCD (High Deﬁ nition Compatible Digital) disc, select the audio output cutoff frequency.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

• [On] – enjoy quiet viewing at night

(DVDs only).

• [Off] – enjoy surround sound with its full

dynamic range.

Video setup

On [Video Setup Page], you can set the following options:

[Component]

Set the video output according to the video connection. If the composite connection is used, this setting is not required.

• [S-Video] – If the S-Video connection is

used, select this option.

• [Pr/Cr Pb/Cb Y] – If the component

connection is used, select this option.

• [RGB] – If the SCART connection is used,

select this option.

[Picture Setting] > [Picture Setting Setup] Customize picture color settings.

[TV Mode]

Select the video output mode. To select the progressive scan mode, ensure that you have connected a progressive scan TV and set [Component] to [Pr/Cr Pb/Cb Y].

• [Progressive] – For progressive scan TV:

turn on the progressive scan mode.

• [Interlace] – For ordinary TV: turn on the

interlace mode.

Preference setup

On [Preference Page], you can set the following options:

[TV Type]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

• [PAL] - For TV with PAL color system.

• [Multi] - For TV that is compatible with

both PAL and NTSC.

• [NTSC] - For TV with NTSC color

system.

[Audio]

Select the preferred audio language for disc play.

[Subtitle]

Select the preferred subtitle language for disc play.

[Disc Menu]

Select the preferred disc menu language.

Note

If the language you have set is not available on • the disc, the disc uses its own default language. For some discs, the subtitle/audio language can • only be changed from the disc menu.

[Parental]

Restricts access to discs that are unsuitable for children. These types of discs must be recorded with ratings.

Press OK/ . Select a rating level, then press OK/ Press the numeric keys to enter the password.

English

Note

Rated discs above the level you set in • [Parental] require a password to be played. The ratings are country-dependent. To allow • all discs to play, select [8 Adult]. Some discs have ratings printed on them but • are not recorded with ratings. This function has no effect on such discs.

Tip

You can set or change the password. (See • “Preference setup - Password setup”.)

[Default]

Resets all the settings of this unit to factory default, except for the password and parental settings.

[Password Setup] > [Password Setup Page] > [Password Mode]

This setting allows you to enable/disable the password for parental control. If the password is enabled, when you play a prohibited disc, this 4-digit password is required.

• [On] - Enable the password for parental

control.

• [Off] - Disable the password for parental

control.

If you forget the password, enter ‘1234’ before • you set a new password.

[Password Setup] > [Password Setup Page] > [Password]

You can change password here. The default password is 1234.

• [Change]

1) Press the numeric keys to enter ‘1234’ or your last set password at [Old Password] ﬁ eld.

2) Enter the new password at [New Password] ﬁ eld.

3) Enter the new password again at [Conﬁ rm PWD] ﬁ eld.

4) Press OK/

to exit the menu.

7 Tune to FM

radio stations

1 Ensure that you have connected and fully

extended the supplied FM antenna.

2 Press TUNER. 3 Press and hold / . 4 When the frequency indication starts to

change, release the button.

The FM tuner tunes to a station with » strong reception automatically.

5 Repeat steps 3-4 to tune to more

stations.

To tune to a weak station:

Press reception.

Program radio stations automatically

/ repeatedly until you ﬁ nd optimal

Program radio stations manually

English

Note

You can program a maximum of 20 preset • radio stations.

1 Tune to a radio station. 2 Press ANGLE/PROG to activate

programming.

3 Press / to allocate a number from

1 to 20 to this radio station, then press ANGLE/PROG to conﬁ rm.

The preset number and the frequency » of the preset station are displayed.

4 Repeat the above steps to program other

stations.

Note

To overwrite a programmed station, store • another station in its place.

Note

You can program a maximum of 20 preset • radio stations.

1 Press / to select a preset number to

start programing.

2 Press and hold ANGLE/PROG for

2 seconds to activate automatic programming. » [AUTO] (auto) is displayed brieﬂ y.

All available stations are programmed » in the order of waveband reception strength.

The ﬁ rst programed radio station is » broadcast automatically.

Tune to a preset radio station 1 Press / to select a preset number

that you want.

Set RDS clock

You can use time signal broadcast together with the RDS signal to set the clock of the unit automatically.

1 Tune to a RDS radio station that

transmits time signals.

The unit reads the RDS time and sets » the clock automatically.

Note

The accuracy of the transmitted time depends • on the RDS station that transmits the time signal.

Show RDS information

RDS (Radio Data System) is a service that allows FM stations to show additional information. If you tune to a RDS station, a RDS icon and the station name are displayed. When automatic programming is used, RDS stations are programmed ﬁ rst.

1 Tune to a RDS station. 2 Press DISPLAY/RDS repeatedly to scroll

through the following information (if available):

Station name» Program type such as » [NEWS] (news),

[SPORT] (sport), [POP M] (pop music)...

Frequency»

Note

See “Product information - RDS program • types” for deﬁ nitions of RDS program types.

8 Adjust volume

level and sound effect

1 To turn on automatic loudness control,

press LOUDNESS/DBB during play until the loudness icon is displayed.

To turn off automatic loudness • control, press LOUDNESS/DBB until the loudness icon disappears.

English

Adjust volume level 1 During play, press VOL +/- to increase/

decrease the volume level.

Select a sound effect

Note

You cannot use different sound effects at the • same time.

Select a preset sound effect

1 During play, press DSC repeatedly to

select:

• [ROCK] (rock)

• [JAZZ] (jazz)

• [POP] (pop)

• [CLASSIC] (classic)

• [FLAT] (ﬂ at)

Enhance bass

1 To turn on bass enhancement, press

LOUDNESS/DBB repeatedly during play

until the DBB logo is displayed.

To turn off bass enhancement, press • LOUDNESS/DBB repeatedly until the DBB logo disappears.

Mute sound 1 During play, press MUTE to mute/unmute

sound.

Listen through headphone 1 Plug a headphone into the socket on

the unit.

Select automatic loudness control

Automatic loudness control increases the treble and bass effect at low volume levels (the higher the volume, the lower the treble and bass levels).

9 Other features

Activate demonstration mode

You can see an overview of all features.

1 In the standby mode with clock display (if

set), press the demonstration mode.

A demonstration of major available » features starts.

To deactivate the demonstration mode:

1 Press on the main unit again.

Adjust brightness of display panel

on the main unit to activate

6 To activate the wake-up timer, press +

VOL - to select [ON] (on) while [OFF]

(off) is blinking.

A clock icon appears on the display.» The unit turns on automatically at »

the set time and switches to the last selected source.

To deactivate the alarm timer, select »

[OFF] (off) at step 6.

Set the sleep timer 1 When the unit is turned on, press SLEEP/

TIMER repeatedly to select a set period

of time (in minutes).

The unit turns off automatically after » the set period of time.

1 In standby mode, press MODE/DIM

repeatedly to select different levels of brightness for the display panel.

Set the alarm timer 1 Ensure that you have set the clock

correctly.

2 In standby mode, press and hold SLEEP/

TIMER.

The hour digits are displayed and begin » to blink.

3 Press + VOL - to set the hour, then press

SLEEP/TIMER again.

The minute digits are displayed and » begin to blink.

4 Press + VOL - to set the minute. 5 Press SLEEP/TIMER to conﬁ rm.

» [OFF] (off) begins to blink.

Connect other devices

Listen to an audio player

You can listen to audio player with red/white audio output sockets through this unit.

1 Connect a red/white audio cable (not

supplied) to the AUX IN L/R sockets and to the audio output sockets on the audio player.

2 Select the AUX source. 3 Start play on the audio player.

Record to a digital recorder

You can record audio from this unit to a digital recorder.

1 Connect a coaxial cable (not supplied) to:

the • COAXIAL socket the digital input socket on the digital • recorder

2 Play audio to be recorded. 3 Begin to record on the digital recorder

(see the digital recorder user manual).

English

10 Product

information

Note

Product information is subject to change • without prior notice.

Speciﬁ cations

Ampliﬁ er

Rated Output Power 2X50W RMS Frequency Response 20 -20000 Hz, ±3dB Signal to Noise Ratio >65dB Aux Input 500 mV RMS 20kohm

Disc

Laser Type Semiconductor Disc Diameter 12cm/8cm Video Decoding MPEG-1 / MPEG-2 /

DivX Video DAC 12Bits Signal System PAL / NTSC Video Format 4:3 / 16:9 Video S/N >48dB Audio DAC 24Bits / 96kHz Total Harmonic

Distortion Frequency

Response

S/N Ratio >65dBA

Tuner (FM)

Tuning Range 87.5 - 108MHz Tuning g r id 50KHz

<1% (1 kHz)

4Hz - 20kHz (44.1kHz)

4Hz - 22kHz (48kHz)

4Hz - 24kHz (96kHz)

Sensitivity - Mono, 26dB S/N Ratio

Sensitivity - Stereo, 46dB S/N Ratio

Search Selectivity >28d Bf Total Harmonic

Distortion Signal to Noise Ratio >55dB

<22 dBf

>43 dBf

<3%

Speakers

Speaker Impedance 2X4ohm Speaker Driver, Base 5” Speaker Driver,

Twe eter Sensitivity >80dB/m/W±4dB/

0.2”

m/W

General information

AC power 220 - 230 V, 50 Hz Operation Power

Consumption Eco Standby Power

Consumption Standby Power

Consumption Composite Video

Output Coaxial Output 0.5Vpp ± 0.1Vpp

Headphone Output 2X15mW 32ohm USB Direct Version 2.0 Dimensions

- Main Unit (W x H x D)

- Speaker Box (W x H x D)

Weight

- With Packing

- Main Unit

- Speaker Box

52W

<1W

<4W

1.0Vp-p, 75ohm

75ohm

248 x 110 x 307mm

170 x 270 x 220 mm

11 kg 2 kg 2 x 2.8 kg

Supported disc formats

USB playability information

Digital Video Discs (DVDs)• Video CDs (VCDs)• Super Video CDs (SVCDs)• Digital Video Discs + Rewritable • (DVD+RW) Compact Discs (CDs)• Picture (Kodak, JPEG) ﬁ les on CDR(W)• DivX(R) disc on CD-R(W):• DivX 3.11, 4.x and 5.x• WMA•

Supported MP3-CD formats:

ISO 9660• Max. title/album name: 12 characters• Max. title number plus album: 255.• Max. nested directory: 8 levels.• Max. album number: 32.• Max. MP3 track number: 999.• Supported sampling frequencies for MP3 • disc: 32 kHz, 44.1 kHz, 48 kHz. Supported Bit-rates of MP3 disc are: 32, • 64, 96, 128, 192, 256 (kbps). The following formats are not supported:•

Files like *.VMA , *.AAC, *.DLF, • *.M3U, *.PLS, *.WAV• Non-English Album/Title name• Discs recorded in Joliet format• MP3 Pro and MP3 with ID3 tag•

Compatible USB devices:

USB ﬂ ash memory (USB 2.0 or USB1.1)• USB ﬂ ash players (USB 2.0 or USB1.1)• memory cards (requires an additional • card reader to work with this apparatus)

Supported formats:

USB or memory ﬁ le format FAT12, • FAT16, FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and • variable bit rate WMA v9 or earlier• Directory nesting up to a maximum of 8 • levels Number of albums/ folders: maximum 99• Number of tracks/titles: maximum 999• ID3 tag v2.0 or later• File name in Unicode UTF8 (maximum • length: 128 bytes)

Unsupported formats:

Empty albums: an empty album is an • album that does not contain MP3/WMA ﬁ les, and is not be shown in the display. Unsupported ﬁ le formats are skipped. For • example, Word documents (.doc) or MP3 ﬁ les with extension .dlf are ignored and not played. AAC, WAV, PCM audio ﬁ les• DRM protected WMA ﬁ les (.wav, .m4a, • .m4p, .mp4, .aac) WMA ﬁ les in Lossless format•

English

+ 239 hidden pages