Philips MCM285 79 User Manual

Micro Hi-Fi System

Register your product and get support at

www.philips.com/welcome

MCM285

2

&

*

3

7
6
5

$

8

)
(

@

)
!

!

%

#

#

Top view

1

2
3

4
5

6

7

8

9

MP3 LINK

%

$

#

@

!

0

^

3

4

Contents

General Information

Supplied accessories ............................................ 6

Environmental information ................................ 6

Safety information ................................................ 6

Preparation

Rear connections ................................................. 7

Optional connection ........................................... 8

Inserting batteries into the remote control... 8

Controls

Controls on the system and remote

control .................................................................... 9

Basic Functions

Switching the system on ................................... 10

Power-saving automatic standby ..................... 10

Adjusting volume and sound............................ 10

CD/MP3/WMA Operation

Playing a disc ........................................................ 11

Selecting a different track ................................. 11

Finding a passage within a track ...................... 11

Playing an MP3/WMA disc ............................... 11

Discs for playback .............................................. 12

Different play modes: Shuffle and Repeat ..... 12

Programming track numbers ........................... 12

Erasing the programme ..................................... 12

External Sources

Connecting external equipment ..................... 14

Clock/Timer

Setting the clock ................................................. 14

Setting the sleep timer ................................ 14-15

Setting the timer ................................................. 15

Specifications ........................................... 16

Maintenance.............................................. 16

Tr oubleshooting .................................... 17

English

Radio Reception

Tuning to radio stations .................................... 13

Programming radio stations ............................. 13

Automatic programming
Manual programming

Tuning to preset radio stations ....................... 13

CAUTION

Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.

5

General Information

English

Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at

www.philips.com/welcome.

Supplied accessories

–2 speaker boxes
– remote control
– MP3 Link cable

Environmental information

All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).

Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

The making of unauthorized copies of copy­protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.

Safety information

● Before operating the system, check that the

operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.

● Place the system on a flat, hard and stable

surface.

● Place the system in a location with adequate

ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.

● The ventilation should not be impeded by

covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.

● Do not expose the system, batteries or discs to

excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.

● No naked flame sources, such as lighted candles,

should be placed on the apparatus.

● No objects filled with liquids, such as vases, shall

be placed on the apparatus.

● The apparatus shall not be exposed to dripping

or splashing.

● Install this unit near the AC outlet and where the

AC power plug can be reached easily.

● If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.

● The mechanical par ts of the set contain self-

lubricating bearings and must not be oiled or
lubricated.

● When the system is switched to Standby

mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.

6

SPEAKERS
IMPEDANCE:

L

R

~

Preparations

English

8 OHM( )

+

–

–

+

Rear connections

The type plate is located at the rear of the
system.

A Power

– Before connecting the AC power cord to the

wall outlet, ensure that all other connections
have been made.

WARNING!
–For optimal performance, use only the
original power cable.
–Never make or change any connections
with the power switched on.

To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).

B Speakers Connection

Front Speakers

Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", red wires to "+" and black wires to "-".

● Fully insert the stripped portion of the speaker

wire into the terminal as shown.

Notes:
–For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

7

Preparations

English

Optional connection

The optional equipment and connecting cords

are not supplied. Refer to the operating
instructions of the connected equipment for
details.

Connecting a non-USB device

Use a cinch cable to connect MP3 LINK to the
audio out terminals of an external equipment
(TV, VCR, Laser Disc player, DVD player or CD
Recorder).

Inserting batteries into the
remote control

Insert two batteries type AAA into the remote

control with the correct polarity as indicated by
the “+”and“-” symbols inside the battery
compartment.

CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.

8

Controls (illustrations on page 3)

Controls on the system and
remote control

1 STANDBY ON

– switches the system on or to standby mode.

2 LCD Display

– shows the status of the system.

3 Source (CD/ TUNER/MP3 LINK)

– selects the respective sound source for CD/

TUNER/MP3 LINK.

4 iR SENSOR

– infrared sensor for remote control.

5 DBB (Dynamic Bass Boost)

– enhances the bass.

6 DSC (Digital Sound Control)

– selects sound characteristics: CLASSIC, JAZZ,

POP or ROCK.

7 DISPLAY/CLOCK

– to set or view the clock.

8 MODE

– selects different play modes: e.g. REPEAT or

SHUFFLE (random order)

9 ;

– Plugs in a headphone.

0 MP3 LINK

– 3.5mm audio input jack.

! PRESET +/- í/ë

– skips to the beginning of a current track/

previous/next track.

– sets the hours and minutes for the clock and

timer.

–selects a preset radio station.

@ VOLUME +/-

– adjusts the volume level.

# ALBUM/TUNING 5 / 6

– selects an album.

– tunes to a radio station.
– (press and hold) fast searches back and forward

within a track/disc.

$ STOP 9

– stops CD playback or erases a CD program.

% 2;

– starts or pauses CD playback.

^ OPEN/CLOSE

– open/close the CD door.

& y

– switches the system to standby mode.

* PROGRAM

– (for CD) programs CD tracks and reviews the

program.

– (for TUNER) programs preset radio stations.

( TIMER

– activates/deactivates the timer.

) SLEEP

– activates/deactivates or selects the sleep time.

– views the remaining sleep time.

¡ MUTE

– switches playback sound off and on.

English

9

Basic Functions

English

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY-ON on the main set.
➜ The system will switch to the last selected

source.

● Press CD, TUNER, or MP3 LINK on the

remote control.

➜ The system will switch to the selected source.

Adjusting volume and sound

1 Adjust the VOLUME control

knob or press VOLUME

3/4 on the remote
control to increase or
decrease volume.
➜ Display shows the
volume level UOL and a
number from 0-40.

2 Press DBB to switch bass enhancement on or

off.

➜ Display shows: DBB if the DBB is activated.

3 Press DSC on the remote control repeatedly to

select the desired sound effect: CLASSIC, JAZZ,
POP, or ROCK.
➜ The selected DSC is shown.

4 Press MUTE on the remote control to stop

sound playback instantly.
➜ Playback will continue without sound and the
display shows MUTE.

● To start sound playback you can:

– press MUTE again;
– adjust the volume controls.

To switch the system to standby mode

● Press STANDBY-ON (y on the remote

control).

➜ The volume level (up to a maximum volume

level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 30 minutes after CD playback has
ended and no control is operated.

10

IMPORTANT:
The lens of the CD player should never be
touched.

Playing a disc

This CD player plays Audio Discs including CD­Recordables, CD-Rewritables and MP3 CD.

¶ CD-ROM, CD-I, CDV, VCD, DVD or computer

CDs, however, are not possible.

CD/MP3/WMA Operation

5 To pause playback press 2;. Press 2; again to

resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.

6 To stop disc playback, press STOP 9.

Note: CD playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER or MP3 LINK.
– you select standby.

Selecting a different track

● Press PRESET +/- í/ë (í/ë on the

remote) once or repeatedly until the desired
track number appears in the display.

● Press 2; to start playback.

Finding a passage within a track

1 Press and hold down ALBUM/TUNING 5 /

6 (5/6 on the remote).

➜ The disc is played at high speed and low
volume.

2 When you find the passage you want, release

ALBUM/TUNING 5 / 6 (5/6 on the

remote).
➜ Normal playback continues.

English

1 Press SOURCE once or more or CD on the

remote control to select CD.

2 Press OPEN/CLOSE on the system to open

the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.

3 Insert a disc with the printed side facing up and

press OPEN/CLOSE to close the CD door.

➜ rEAd is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks and playing time (or the total number
of albums and tracks for MP3 disc) are shown.

4 Press 2; to star t playback.

➜ The current track number and elapsed
playing time of the track are displayed during disc
playback.

Playing an MP3/WMA disc

1 Load an MP3/WMA disc.

➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "XX YYY" is displayed. XX is the current
album number and YYY is the current track
number.

2 Press ALBUM/TUNING 5 / 6to select a

desired album.

3 Press PRESET +/- í/ë (í/ë on the

remote) to select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
í (í on the remote) or the last track of an

album by pressing ë (ë on the remote).

4 Press 2; to star t playback.

11

CD/MP3/WMA Operation

English

Discs for playback

This system can playback all digital audio CD,

finalised digital audio CD-Recordable (CDR)
discs and finalised digital audio CD-Rewritable
(CDRW)discs.

MP3-CDs (CD-ROMs with MP3 tracks)

Supported MP3 disc formats:

– ISO9660, Joliet, UDF 1.5
– Maximum title number: 511 (depending on

filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz, 44.1

kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable

bitrates

Different play modes: SHUFFLE
and REPEAT

You can select and change the various play
modes before or during playback.

REPEAT ............plays the current track

continuously

REPEAT ALL ...repeats the entire disc/

programme

SHUF ................ tracks of the entire disc are

played in random order

SHUF REPEAT ALL

................................. repeats the disc/program

continuously in random order

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.

1 In the STOP position, press PROGRAM on the

remote control to enter the programming
mode.

2 Use PRESET +/- í/ë (í/ë on the

remote) to select your desired track number.

● For MP3/WMA disc, press ALBUM/TUNING

5 / 6 (5 / 6 on the remote) to select

the desired album and title for programming.

➜ The selected track number and PROG flash on

the display panel.

3 Press PROGRAM on the remote control to

confirm the track number to be stored.

4 Repeat steps 2-3 to select and store all desired

tracks.

5 To start playback of your disc programme, press

2;.

Note:
– If you wish, you can add fur ther tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.

Erasing the programme

You can erase the programme by:

● pressing STOP 9 once in the STOP mode;

● pressing STOP 9 twice during playback;

● opening the CD compartment;

● selecting another sound source
➜PROG disappears from the display.

1 To select your play mode, press MODE before

or during playback until the display shows the
desired function.

2 Press 2; to star t playback if in the STOP

position.

3 To return to normal playback, press MODE until

the various SHUFFLE/ REPEAT modes are no
longer displayed.

● You can also press STOP 9 to cancel your play

mode.

12

Tuning to radio stations

1 Press SOURCE or TUNER once or more to

select the desired waveband : FM or MW.

2 Press and hold ALBUM/TUNING 5 6

until the frequency indication starts to change,
then release.

➜ The display will show "SEARCH" until a r adio

station with sufficient signal strength is found.

➜ If the FM station is received in stereo, = is

shown..

3 Repeat step 2 if necessary until you find the

desired radio station.

● To tune to a weak station, press ALBUM/

TUNING 5 6 briefly and repeatedly until

optimal reception found.

Note:
– The system is equipped with a fixed FM antenna
and a built-in MW antenna. For optimal FM
reception, fully extend and adjust the position of
the FM antenna until the strongest signal is found.

Radio Reception

Programming radio stations

You can store up to 40 radio stations (FM:20,
MW: 20) in the memor y.

Automatic programming

1 Press PRESET +/- í/ë to select the desired

preset number.

2 Press and hold PROGRAM until "AUTO" is

displayed.

➜ All available radio stations with sufficient signal

strength will be stored automatically, starting
from FM and followed by MW band.

To stop automatic programming

● Press STOP9 .

Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.

Manual programming

1 Tune to your desired radio station (refer to

“Tuning to radio stations”).

2 Press PROGRAM.

➜ PROG starts flashing.

To store the radio station to another
preset number

● Press PRESET +/- í/ë to to select the

desired preset number.

3 Press PROGRAM again to store the radio

station.

➜ PROG disappears

4 Repeat steps 1–3 to store other radio stations.

English

To exit manual programming

● Press STOP 9.

Tuning to preset radio stations

● Press PRESET +/- í/ë until the desired

preset station is displayed.

13

External Sources

English

Connecting external equipment

1 Connect the audio out terminal of the por table

device (i.e. iPod or MP3 player) to the MP3
LINK terminal of your system.

2 Press SOURCE once or more to select MP3

LINK.

➜ "MP3 in" is displayed.

Clock/Timer

Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.

– Refer to the operating instructions for the
connected equipment for details.

Setting the clock

1 In standby mode, press and hold DISPLAY/

CLOCK.

➜ The clock digits for the hour s flash.

2 Press PRESET +/- í/ë (í/ë on the

remote) to set the hours.

3 Press DISPLAY/CLOCK.

➜ The clock digits for the minutes flash.

4 Press PRESET +/- í/ë (í/ë on the

remote) to set the minutes.

5 Press DISPLAY/CLOCK to confirm the time.

Note:
– If the clock has not been set, - - : - - will be
displayed.

14

Setting the sleep timer

The sleep timer enables the system to switch off
by itself after a set period of time.

1 In active mode, press SLEEP on the remote

control repeatedly until the desired timer option
appears.
➜ Selections are as follows (time in minutes):

SLPOFF=SLP120=SLP90=SLP60
=SLP45=SLP30=SLP15=SLPOFF

➜ Display shows if activated, and disappears if
deactivated.

2 To cancel the sleep function, either press

SLEEP on the remote control once or more
until “SLPOFF” appears, or press STANDBY­ON (y on the remote) to switch to standby

mode.

Clock/Timer

To check the remaining length of time
after sleep timer is activated

● Press SLEEP once.

Setting the timer

● The system can switch on to CD, TUNER, or

MP3 LINK mode automatically at a preset time,
serving as an alarm to wake you up.

IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level (If the last tuned
volume level is less than 15, it will increase
gradually from the minimum level to 15).

1 In active or standby mode, press TIMER on the

remote control.

➜ The last timer setting is shown.

2 Press TIMER again for more than two seconds.

➜ The clock digits for the hours flash.

3 Press PRESET +/- í/ë (í/ë on the

remote) to set the hours.

4 Press TIMER again.

➜ The clock digits for the minutes flash.

5 Press PRESET +/-í/ë (í/ë on the

remote) to set the minutes.

6 Press TIMER to confirm the time.

➜ The timer is now activated and display shows

.

Notes:
– When the preset time is reached, the last
selected source will be played automatically.
– During timer setting, if no button is pressed
within 10 seconds, the system will exit timer setting
mode automatically.
– If remote control is used, timer/clock setting is
available only in CD and TUNER modes.

English

To deactivate the timer,

● Press TIMER in active or standby mode.
➜ disappear s if the timer is deactivated.

15

Specifications

English

AMPLIFIER

Total output power

........................................... 25 W (12.5 W per channel)

Signal-to-noise ratio .......................... ≥ 62 dBA (IEC)

Frequency response ......... 63 – 16000 Hz, ± 3 dB

CD PLAYER

Frequency range .................................. 63 – 16000 Hz

Signal-to-noise ratio ............................................ 65 dBA

TUNER

FM wave range ...................................87.5 – 108 MHz

MW wave range ................................ 531 – 1602 kHz

Maintenance

SPEAKERS

1-way Bass Reflex System

Impedance ........................................................................ 8 Ω

Speaker diameter ............................................................. 4”

Dimensions (w x h x d)..........14.6x23.6x18.5 (cm)

GENERAL

AC Power ...................................................... 230 – 240 V;

....................................................................................... 50 Hz

Dimensions (w x h x d) ....... 14.6x23.6x23.9 (cm)

Weight (with/without speakers) ..................................

.............................................................................. 6.42 / 2.5 kg

Specifications and external appearance are
subject to change without notice.

Cleaning the Cabinet

● Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

● When a disc becomes dir ty,

clean it with a cleaning cloth. Wipe
the disc from the centre out.

● Do not use solvents such as

benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analogue records.

16

Cleaning the disc lens

● After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.

Tr oubleshooting

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service centre.

Problem Solution

CD OPERATION

“No disc” is displayed. – Insert a disc.

– Check if the disc is inserted upside down.
–Wait until the moisture condensation at the lens

has cleared.
– Replace or clean the disc, see “Maintenance”.
– Use a finalised CD-RW, CD-R or MP3 CD.

RADIO RECEPTION

Radio reception is poor. – Increase the distance between the Micro HiFi

System and your TV or VCR.

GENERAL

The system does not react when buttons – Remove and reconnect the AC power plug and
are pressed. switch on the system again.

Sound cannot be heard or is of poor – Adjust the volume.
quality. – Check that the speakers are connected correctly.

– Check if the stripped speaker wire is clamped.

The left and right sound outputs are – Check the speaker connections and location.
reversed.

English

The remote control does not function – Reduce the distance between the remote control

and the system.
– Insert the batteries with their polarities

(+/– signs) aligned as indicated.
–Replace the batteries.
–Point the remote control directly toward

IR sensor on the front of the system.

The timer is not working. – Set the clock correctly.

– Press TIMER in standby mode to switch on the

timer.
– If a recording is in progress, stop the recording.

The Clock/Timer setting is erased. –Power has been interrupted or the power cord

has been disconnected. Reset the clock/timer.

17

AUSTRALIA - Philips Manufacturers Warranty for Australia only

These warranty conditions are valid for the
following consumer electronics products:
Colour Televisions, Projection TV, Plasma &
LCD TV, Video Cassette Recorders, CD
Recorders & Players, DVD Players, DVD
Recorders, DVD Recorders with HDD,
Audio Systems, Home Theatre systems,
Digital Set Top Box & Portable Audio
products.

The benefits given to the purchaser by this
warranty are in addition to all other rights
and remedies which the purchaser has in
respect of the product under the Trade
Practices Act or other Commonwealth or
State Law.

Philips Consumer Electronics warrants its products
to the purchaser as follows and subject to the
stated conditions.

1 Year Free Repair Ser vice - at Philips ASC

Colour Television, Plasma Television, LCD Television,
Projection Televsion, DVDR/VCR Combo, DVD
Recorders with Hard Drive, LCD Projectors,
Wireless Audio Systems, Audio Systems, Home
Theatre Systems & Digital Set-Top-Box.

1 Year Free Replacement – at your Retailer

Por table Audio, MP3 Infotainment products, Video
Cassette recorders, DVD Player, DVD/VCR Combo
Player, DVD Recorder without HDD & Por table
DVD/LCD players.

Conditions of Repair Warranty

1. All claims for warranty service should be made to

your nearest Philips Authorised Service Centre or
the Philips Technology Care Centre. Reasonable
evidence of date of purchase must be provided.

2. This warranty extends only to defects in material or

wor kmanship occurring under normal use of the
product when operated in accordance with the
instructions.

3. If a replacement product is supplied under the

repair policy it is warranted for the remainder of the
warranty of the original purchased product only.

4. Home service is provided only within the normal

service area of one of our recommended
Authorised Service Centres (ASC). It will be
provided for television receivers only with a screen
side of 67cms or above (product includes CRT, LCD
TV, PTV, and Plasma TV). Televisions with screen side
less than 67cms and all other products types are to
be taken or sent by the consumer to the workshop
of your nearest Authorised Service Centre, at the
Consumer’s expense.

5. This Manufacturer s Warranty is limited to 3 months

for the above listed Consumer Electronics products
if used in commercial applications.

6. Philips may, at its discretion choose to replace rather

than repair any product covered by this warranty.

7. Product accessories are covered by the same

warranty period. Please contact the Philips
Technology Care Centre for free replacement of faulty
accessories.

Warranty valid for all new products purchased after 1st January 2007

18

8. This Manufacturers Warranty is neither

transferable nor valid in countries other than
Australia.

This warranty does not cover :
a) Mileage or travel outside the normal ser vice

area covered by selected Authorised Ser vice
Centre.

b) Service costs arising from failure to correctly

adjust the controls of the product or to
observe the instructions, or inspections that
reveal that the product is in normal working
order.

c) Product failures caused by misuse, neglect,

accidental breakage, transit damage, inexper t
repairs or modification by un-authorised
persons, external fires, lightning strikes, floods,
vermin infestation or liquid spillage.

d) Cleaning of video or audio heads.
e) Inadequate receiving antennae.
f) Replacement of worn or used batteries or

other consumables.

g) Consumer products used in commercial

applications (This warranty is limited to 3
months only).

h) Second hand products.

The conditions contained in this
warranty card replace and override the
provision of the Philips World-Wide
Guarantee for products purchased in
Australia and used in Australia.

Service is provided through more than 100
accredited Authorised Service Centres
throughout Australia. For direct contact with the
nearest recommended Authorised Service
Centre in capital & regional cities/towns

Authorised Service Centre Network

1300 361 392

Customer support is provided in Australia by
our trained call centre staff. For assistance with
product features and specifications, please call

Technology Care Centre

1300 363 391
Please record the following information

for your records and keep in a safe place.

We recommend retaining your
purchase receipt to assist with any
warranty claim.

Model number: .................................................

Serial number: ...................................................

Date of purchase: ............................................

Retailer: ..................................................................

Philips Consumer Electronics
a division of Philips Electronics Australia

Limited

ABN 24 008 445 743,

Level 1, 65 Epping Road NORTH RYDE NSW 2113.

NEW ZEALAND -

Thank-you for purchasing this quality Philips product.

Philips New Zealand Ltd guarantees this product against defective components and faulty
workmanship for a period of 12 months. Any defect in materials or workmanship occurring
within 12 months from the date of purchase subject to the following conditions will be rectified

free of charge by the retailer from whom this product was purchased.

Conditions

1. The product must have been purchased in New Zealand.As proof of purchase, retain the

original sales docket indicating the date of purchase.

2. The guarantee applies only to faults caused by defective components, or faulty workmanship

on the part of the manufacturer.

3. The guarantee does not cover failures caused by misuse, neglect, normal wear and tear,

accidental breakage, use onthe incorrect voltage, use contrary to operating instructions,
or unauthorised modification to the product or repair by an unauthorised technician.

4. Reasonable evidence (in the form of a sales docket) must be supplied to indicate that the

product was purchased no more than 12 months prior to the date of your claim.

5. In the event of a failure, Philips shall be under no liability for any injury, or any loss or

damage caused to property or products other than the product under guarantee.

This guarantee does not prejudice your rights under common law and statute,
and is in addition to the normal responsibilities of the retailer and Philips.

Guarantee and Service for New Zealand

How to claim

Should your Philips product fail within the guarantee period, please return it to the
retailer from whom it was purchased. In most cases the retailer will be able to
satisfactorily repair or replace the product.

However, should the retailer not be able to conclude the matter satisfactorily, or if you
have other difficulties claiming under this guarantee, please contact

The Guarantee Controller
Philips New Zealand Ltd.
4 P.O. Box 41.021
Auckland
3 (09) 84 94 160
fax 3

(09) 84 97 858

19

English

Meet Philips at the Internet-

http://www.philips.com

-

MCM285

CLASS 1

LASER PRODUCT

Printed in China PDCC-ZYL-0826