Philips LX User Manual

LX Series

HEAVY DUTY LED EXIT

Page 1 of 2

LXN1RW

6.8"

(17.3 cm)

12. 5"

(31.8 cm)

4.8"

(12.2 cm)

2.5"

(6.4 cm)

2.0"

(5.1 cm)

7.8 "

(19.9 cm)

Features

Illumination: Illumination

of the exit stencil face is

accomplished with either

red or green high-output

Light Emitting Diodes (LEDs).

Hot spots and striations are

eliminated by a combination

of indirect and direct aiming

points covering the exit stencil

face.

Housing: Constructed of

three-piece, 20 gauge, cold

rolled steel. White powder

coat finish is standard, black

is optional. NFPA-compliant

field-selectable chevrons. UL

damp location listing is available

on the AC Only version.

Universal knockouts located

on the backplate allow for wall

mounting directly to standard

junction boxes. A mounting

canopy is provided for top and

end mount applications.

Operating Temperature

Range: Standard Location

65°F (19°C) to 85°F (30°C)

Damp Location

50°F (10°C) to 104°F (40°C)

Electronics: AC Only -

120/277 VAC dual voltage

input.

Self-Powered - 120/277 VAC

dual voltage input with surge-

protection, solid-state circuitry

provides for a reliable charging

system. Charging system is

complete with low voltage

disconnect, AC lockout,

brownout protection, AC

indicator lamp and test switch.

Electrical Specifications:

AC Only Red:

0.030 A (120 VAC)

0.013 A (277 VAC)

AC Only Green:

0.035 A (120 VAC)

0.015 A (277 VAC)

Self-Powered Red:

0.037 A (120 VAC)

0.016 A (277 VAC)

Self-Powered Green:

0.037 A (120 VAC)

0.016 A (277 VAC)

Job Information Type:

Job Name:

Cat. No.:

Code Compliance

UL 924 listed. Optional UL

damp location (AC only

versions) listed. NFPA 101,

NEC, BOCA, OSHA and IBC

illumination standards.

Warranty

Three year full electronics

warranty. Five year full,

five year prorated battery

warranty.

Notes:

Ordering Information

Series

LX = LX Serie s Heavy Duty Steel LED Exit

Accessories (order as a separate item) XCKITW = Canopy Kit , White DCKCE06 = DC Conversion Kit , 6 VDC, 5.4 W lamps DCKCE22 = DC Conversion Kit, 12 VDC, 5.5 W lamps XPKIT12W = Pendant Kit, 12”, White Finish WG4 = Wire Guard for Exit Wall Mounting WG10 = Wire Guard for Exit End Mounting

Note

1) Some option combinations may impact UL listing. Consult factor y for specifics.

Battery

A = AC Only N = Nickel Cadmium

# of Faces

1 = Single 2 = Double

Letter Color

R = Red G = Green

LX Series

HEAVY DUTY LED EXIT

Housing Color

B = Black W = White

Factory Installed Options

2CKT1 = 120 VAC Two Circuit Wiring 2CKT2 = 277 VAC Two Circuit Wiring BF = Buzzer/Flasher (emergency units only) BZ = Buzzer (emergency units only) EX = Special Input Transformer (specify voltage

and frequency)

FA = 24 VDC Fire A larm Interface FL = Emergency Flasher SW = Special Wording (consult factory) Z = UL Damp Location Listing (AC only)

Page 2 of 2

Philips Lightolier e: lol.webmaster@philips.com t: (508) 679-8131 w: www.lightolier.com

LX Series August 12, 2011

Job Information Type: