Philips KX-T7667 User Manual
Panasonic Telephone Systems
Model No.
Digital Proprietary Telephone
Panasonic KX-T7667, KX T7667, KXT7667, KXDT321, KX-DT333, KX-DT343, KX-T7603, KX-T7640
KX-T7667
www.voicesonic.com
Phone: 877-289-2829
Installation Instructions
Thank you for purchasing the Panasonic KX-T7667 Digital Proprietary Telephone.
Please read this manual before using and save for future reference.
This product can be used with a Panasonic KX-TDA series PBX. For operation,
refer to the User Guide for your PBX.
Important Information
When you ship the product:
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a postage-paid letter, detailing the symptom to the outside of the carton.
DO NOT send the product to the Executive or Regional Sales offices. They are NOT
equipped to make repairs.
Product service:
Panasonic Servicenters for this product are listed in the servicenter directory.
Consult your certified Panasonic dealer for detailed instructions.
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETIZED AND MAY RETAIN SMALL FERROUS
OBJECTS.
DISCONNECT THE TELEPHONE LINE CORD FROM THIS PRODUCT IF THIS
PRODUCT EMITS SMOKE, AN ABNORMAL SMELL OR MAKES UNUSUAL NOISE.
THESE CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK. CONFIRM THAT
SMOKE HAS STOPPED AND CONTACT AN AUTHORIZED SERVICENTER.
IMPORTANT NOTICE:
During a power failure, this telephone will not operate. Please ensure that a separate
telephone, not dependent on local power, is available for use in an emergency.
Included Accessories: (for extra orders, call toll free 1-800-332-5368)
Handset . . . . . . . . . . . . . . . 1 Handset Cord . . . . . . . . . 1
Telephone Line Cord . . . . . 1 Stand . . . . . . . . . . . . . . . . 1
Location of Controls
LCD (Liquid Crystal Display) with Backlight
16
15
1
2
3
4
5
6
7
8
PROGRAM: Used to enter and exit
1
the personal programming mode.
CONF (Conference): Used to
2
establish a multiple party conversation.
INTERCOM: Used to make or receive
3
intercom calls.
FWD/DND (Call Forwarding/Do Not
4
Disturb): Used to perform Call
Forwarding or Do Not Disturb.
FLASH/RECALL: Used to disconnect
5
the current call and make another call
without hanging up.
9 1210 11
AUTO ANS (Auto Answer)/MUTE:
6
Used to receive an incoming call in
hands-free mode or mute the
microphone/handset during a
conversation.
AUTO DIAL/STORE: Used for
7
System/Personal Speed Dialing or
storing program changes.
8
REDIAL: Used to redial the last
dialed number.
9
TRANSFER: Used to transfer a call
to another party.
10
HOLD: Used to place a call on hold.
14
13
Microphone
— 2 —
Location of Controls
SP-PHONE (Speakerphone): Used
11
for the hands-free operation.
Navigator Key: Used to adjust the
12
volume and select desired items for
each function.
Flexible Outside (CO) Line Button:
13
Used to make or receive an outside
call. Pressing this button seizes an
MESSAGE: Used to leave a message
15
waiting indication or call back the
party who left the message waiting
indication.
Message/Ringer Lamp: When you
16
receive a call, the lamp flashes red.
When someone has left you a
message, the lamp stays on red.
idle outside line automatically. (Button
assignment is required.) Also used as
feature buttons. (Button assignment is
required.)
PAUSE: Used to insert a pause
14
during dialing.
Tilt Angle
The tilt angle of the unit can be adjusted.
To adjust the angle, insert the stand into the desired holes as shown below.
< LOW > < HIGH >
PUSH
PUSHPUSH
LOW
HIGH
PUSH
PUSH
LOW
HIGH
— 3 —
Loading...