Philips Kala Plus 200 User Manual

Clip

INSTALLING TELEPHONE AND BASE STATION

1. CONTENTS

2. INSTALLING TELEPHONE AND BASE STATION

• Location of the base station

• Inserting/Replacing batteries

• Telephone connection

• Charging/Recharging the telephone

• Telephone range

• Installing another KALA 200 handset

3. PRESENTATION OF TELEPHONE AND ACCESSORIES

4. THE DISPLAY

• Programming icons

• Icons for common functions

5. USING THE TELEPHONE

• Calling directly/Hanging up

• Taking a call

• Placing a call on hold/Transferring a call

• Earpiece volume adjustment

6. USING THE PHONEBOOKS

• Storing your phone numbers

• Consulting a phonebook

• Calling from a phonebook

• Changing a phonebook entry

• Deleting an entry from the phonebook

• Selecting the ringer type

7. THE LIST OF REDIAL NUMBERS AND INCOMING CALL LOG

• List of numbers to redial

• Incoming call log

8. HOW TO PROGRAM YOUR PHONE

• Example: selecting and navigating

9. PROGRAMMING OPTIONS

• Melody programming options

• Registration of the handset with another base station

• Settings programming option

• Caller identification service

• Other indirect programming options

10. TROUBLESHOOTING

11. YOUR PHILIPS WARRANTY

12. DECLARATION OF CONFORMITY

13. ENVIRONMENT AND SECURITY

Kala 200

(

TD6131

)

Location of the base station

In order to reduce the risk of interference, place the base station at least 1m away from any other electrical appliance (telephone, television, computer, etc.) The base station should be placed on a flat surface. The base station should not be kept in a damp room, near a heat source or close to obstacles such as thick walls or metallic structures.

Inserting/Replacing batteries

Your handset is powered by two rechargeable AA/R6 batteries.

Only

AA 600 mAh rechargeable

batteries should be used as replacements.

Never use non rechargeable batteries.

1. Slide down the cover 2. Insert batteries following the diagram. on the back of the telephone.

3. Close the cover.

Telephone connection

On the bottom of the base station: 1

. Connect the power supply (B) into the base station then

plug the power adaptor into the easily accessible wall socket.

2. Connect the telephone cord (A) to the base station and then to the PTT wall socket. Place the handset on the base station (charging unit).

Charging/Recharging the telephone

While the batteries are being charged, flashes on the screen and shows . When the battery icon on the display shows , the batteries are fully charged.

You will hear a validation beep when you place the handset on the base station. On first use or when new batteries have been inserted, charge the batteries for at least 24 hours. You will hear a beep when you activate the telephone if the batteries need to be charged.

Telephone range

Your telephone has a range of : 50m indoors - 350m outdoors. The symbol on the display indicates that the handset is connected on the base station.

Installing another KALA 200 handset

You can register up to 4 handsets with your base station (See Page 9 Programming options). Additional handsets do not require additional telephone connections but do need a power supply adaptor. The reference of Additional Kala 200 handsets is TD 6830.

PRESENTATION OF TELEPHONE AND ACCESSORIES

moves to the left, or displays the previous entry.

moves to the right, or displays the following entry.

validates the entry.

press: removes a character during entry. press and hold: exit any mode (programming, phonebooks or lists).

Modes: list of last incoming calls.

list of last numbers dialled (redial key).

program the telephone.

Mains adapter

User guide

Programming

key

Redial

list key

Incoming

call log

key

Earpiece

The batteries contain Cadmium and must be disposed of in compliance with the waste disposal regulations. Never use non-rechargeable batteries.

The manufacturer assumes no responsibility for non-respect of these regulations.

The crossed-out dustbin signifies that the battery should not be disposed of with general household waste.

Batteries

Family

phonebook

key

Friends

phonebook

key

Talk key

To make an external call, end an external

call, and answer

an external call.

To call all internal

handsets recognised

by the base station or

put a call on hold (with hold music).

(“internal call” key).

Earpiece

volume

adjustment

How to optimise batteries lifespan

If you plan not to use your phone for at least 15 days, we would suggest you to remove the batteries from the handset if you disconnect the mains power.

The handset may also be placed on the base station with the keypad face-up.

The key located

on the base sta-

tion side can be

used to make all

handsets ring at

the same time

Only use the power and telephone cables supplied with the telephone.

Telephone cable

Functions keys:

When using your telphone,

3 beep types will

be heard:

• the error beep ,

• the validation beep ,

• the invitation beep .

Beep indicators

THE DISPLAY

Icons for common functions

USING THE TELEPHONE

10 character screen

Scrolling

arrows

icon status description

battery

incoming call log

friends phonebook

on hold/ internal call

family phonebook

on full 1/4 full less than 1/2 hour off discharged flashing charging

on new log entry off no new log entry

on being accessed or incoming call (Caller identification service*) flashing programming

on call in progress flashing call arriving

on external call on hold

or if a second or another handset: internal call in progress

on being accessed or incoming call (Caller identification service*) flashing programming

on in range off handset not registered to the base station flashing out of range

antenna

external

Talk key

Your phone rings. Press the "talk" key to be connected. Press the same key to hang up.

Call directly/Hang up

Enter your number, then press the "talk" key. Press the "talk" key to hang up.

Earpiece volume adjustment

During a call press this key to adjust the earpiece volume.

4 levels are available. They appear on the screen with the “+” symbol.

The selected volume will be valid for the following calls.

Phonebook access (see description of the phonebook Page 6)

Press the “Friends“ or “Family“ phonebook key to access the chosen phonebook.

Note: only phonebooks containing entries can be accessed (otherwise, you have a beep error). Pressing a second time while scrolling will exit the phonebook.

Placing a call on hold and transferring a call

Press the ”internal call” key to place a call on hold, during which the person calling will hear music.

Press the "internal call" key to transfer a call (this option is only available if you have more than one handset). All the handsets on the base station will then be called.

There is no need to wait for the receiver to pick up before hanging up (by pressing the "talk" key).

Additional

handset

setting

Settings

Programming icons

Ringing

melodies

setting

*Caller identification service: This function is available if you have subscribed to your operator’s Caller identification service. The network sends the caller’s number to your telephone. If this number is stored in the Family or Friends phonebook, the corresponding icon will appear and the relevant melody will sound after the second ring (see Pages 6 and 7).

+ 4 hidden pages