Philips HX3631/10, HX3631/04, HX3631/03, HX3631/02 User manual
6 Automatically turns off after
two minutes.
7 Replace brush heads every
3 months or sooner if needed.
The toothbrush is safe to use on:
- Braces (brush heads wear out
sooner when used on braces).
- Dental restorations (llings,
crowns, veneers).
CLEANING AND
STORAGE
Clean head with water and wipe
handle regularly with a damp cloth
only. Store in a cool dry location
when not used.
DISPOSAL
At product end of life - do not
throw away in trash can; recycle
products and batteries appropriately.
WARRANTY
This product is warranted for 1 year
from the date of purchase. What is
not covered under the warranty:
- Brush heads
- Replacement batteries
- Damage from misuse, abuse,
neglect alterations, unauthorized
repair/parts.
- Normal wear and tear including
discoloration or fading.
For complete warranty details,
visit www.philips.com/support and
download the operator’s manual
with full warranty details.
Questions: Call 1-800-682-7664
HX3600
4235.020.6204.2
IMPOR-
SAVE
TANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE
Warnings
- Use only as intended and with
manufacturer attachment.
- Use only 1.5 V AA Alkaline
batteries. Always replace with
two new batteries; never mix old
and new batteries.
- Supervise use by children and
persons with reduced physical,
sensory or mental capabilities.
- Discontinue use if any part of this
product appears damaged in any
way (brush head and handle).
- Use this product only for its
intended use. This is not a toy.
- Consult dentist or physician if you
experience signicant bleeding, discomfort, pain or medical concerns.
THESE
INSTRUCTIONS
Electromagnetic elds (EMF)
This appliance complies with current
standards regarding electromagnetic
elds (EMF). If used as directed, this
appliance is safe.
OPERATING
INSTRUCTIONS
Note: Not intended for use on multiple
patients in a dental practice or institution.
1 Pull battery cap down. Install
2 size 1.5 V AA Alkaline
batteries. Proper battery
direction is indicated under
cap. Do not use the product
without battery cap installed.
2 Install brush head by placing on
metal shaft and pushing down.
Remove brush head by pulling up.
Note: A gap between brush head and
handle is normal.
3 Avoid splattering: place brush
in mouth before turning on.
4 Press power on/off button to
turn on.
5 Brush normally with light
pressure for 2 minutes.
Loading...