Philips HTS6515/12, HTS6515/05, HTS6515 Quick Start Manual

3

Enjoy

DVD Home Theatre unit

Remote Control

and 2 batteries

Table stand

Micro  bre

cleaning cloth

Subwoofer

User

Manual

Register your product and get support at

www.philips.com/welcome

Quick Start Guide

HTS6515

What’s in the box?

Connect

Set up

Enjoy

1
2
3

EasyLink control

This feature is only applicable if this DVD Home Theatre
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.

HDMI

HDMI

HDMI CEC

TV

AUDIO

AUDIO

A Turn on the HDMI CEC operations on your TV and

other connected devices. See TVs/devices manual for
details.

B You can now enjoy the EasyLink controls.

One touch play [ Auto Wake-up TV ]

A Press PLAY.

It turns on this unit and start disc play (if a video disc

is detected), and your TV automatically turns on and
switches to the correct viewing channel.

Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.

One touch power off [ System Standby ]

A Press and hold 2.

It turns off all linked devices.

Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.

One touch audio input switching

This unit is able to render the audio signals from the
active source and switch automatically to the
corresponding audio input.

Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.

A Press DISC.
B Press OPTIONS.
C Press B.
D Select

[ EasyLink ]

, then press B.

Screen Saver

DivX(R) VOD Code

Sleep Timer

Display Dim

Disc Lock

OSD Language

EasyLink

Standby Mode

General Setup

Auto Wake-up TV

System Standby

System Audio Control

Audio Input Mapping

E Select [ System Audio Control ] > [ On ], then

press OK.

F Select [ Audio Input Mapping ], then press OK.
G Select [ OK ] in the menu, then press OK to start

scanning of devices.

H When scanning complete, select the audio input of

this unit that is used to connect to your TV/device
(e.g. AUX1 Input), then press B.

I Select the TV/device (appeared in its brand name)

in the right panel, then press OK.

J

Repeat steps 8~9 to map other connected devices.

K To exit the menu, press OPTIONS.

Note Philips does not guarantee 100%

interoperability with all HDMI CEC compliant devices.

Speakers

Component
video cables

Big bracket

2 Small brackets

Mounting knob

Need help?

User Manual

See the user manual that came with your Philips DVD Home Theatre System.

2008 C Koninklijke Philips N.V.
All rights reserved.

sgpjp_816/12-eng1

Scart cable

Power cable

Audio cables

subwoofer

Satellite Receiver /

Cable Box

HDD / DVD Recorder

1

Connect

2

Set up

A

Find the viewing channel

A Press 2 to turn on this

DVD Home Theatre unit

.

B Turn on the TV. Use the TVs remote control to

select the correct viewing channel.

Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,

° button) until

you see the Video In channel.

B

Start Ambisound setup

When you turn on this DVD Home Theatre unit for the
 rst time, change the Ambisound setup according to
your room environment and setup.

A In disc mode, press OPTIONS.
B Press V to select [ Audio Setup ] in the menu,

then press B.

C Select [ Ambisound Setup ] in the menu, then press

B.

D Select a setup you want to change, then press B.

[ Room Acoustics ]
Select the type of walls that surround your room.
The default setting is [ Hard (concrete, wood) ].

[ Room Placement ]
Select the speakers placement position in your room.
The default setting is [ Middle of room ].

[ Speaker Distance ]
Select the distance between two speakers. The
default setting is between 2~3 meters.

[ Listening Position ]
Select the distance between the listening position and
the speakers. The default setting is between 2~3
metres.

E Press vV to select a setting, then press OK.
F To exit the menu, press OPTIONS.

Note Refer to the accompanying user manual
for other setup options.

A

Placement

Proper speakers system placement is important to
ensure optimum sound performance.

RIGHT

LEFT

B

Connect speakers

RIGHT

LEFT

A Connect the left and right Ambisound speakers to

the matching sockets on the subwoofer.

C

Prepare for rear connections

A Push up the catch and remove the rear cover.
B Connect the required cables (see the following

sections for details) and direct all the cables to the
open hole on top.

D

Connect to TV

HDMI IN

HDMI OUT

SCART

SCART

z

Connect a scart cable from the SCART socket to

the SCART IN socket on your TV (or connect the
component video cables to the corresponding
COMPONENT VIDEO sockets).

z

If your TV supports HDMI, connect the HDMI cable

(not supplied) from the HDMI OUT socket to the
HDMI IN socket on your TV.

Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.

E

Connect audio output from TV (for
EasyLink control)

To hear the TV audio through this DVD Home Theatre
unit, connect the audio cables (supplied) from the
AUDIO IN-AUX1 sockets to the AUDIO OUT sockets
on your TV.

Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until ‘AUX1 INPUT’ is displayed on the display panel.

Subwoofer (rear)

F

Connect subwoofer and power
cable

TO SUBWOOFER

C

A

B

A

Unwind the cables from TO MAIN UNIT on the
subwoofer and connect it to TO SUBWOOFER
socket on this DVD Home Theatre unit.

B Connect the FM antenna to the inner pin of the FM

75  socket (for some models, it has been
connected in the factory). Extend the wire for
optimum reception.

C Connect the power cable from subwoofer to the AC

power outlet.

G

Attach table stand to DVD Home
Theatre unit

Align Arrow

With Table Stand



A

Align Arrow
With table Stand

A table stand bracket

A Close the rear cover.
B Place the table stand bracket with the arrow

indicators aligned. Then use the protrude panels to
hold the table stand bracket.

Note All the cables must be placed properly inside
the rear panel in order for the rear cover to close.

Subwoofer (rear)

FM antenna

DVD Home Theatre unit (rear)

Or