Philips HTS6100/12, HTS6100/05, HTS6100 Quick Start Manual
3
Enjoy
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
HTS6100
What’s in the box?
Connect
Set up
Enjoy
1
2
3
2008 C Koninklijke Philips N.V.
All rights reserved.
sgpjp_814/12-eng1
EasyLink control
This feature is only applicable if this DVD Home Theatre
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.
AUDIO
AUDIO
HDMI
HDMI CEC
TV
HDMI
A Turn on the HDMI CEC operations on your TV and
other connected devices. See TVs/devices manual for
details.
B You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
A Press PLAY.
It turns on this unit and start disc play (if a video disc
is detected), and your TV automatically turns on and
switches to the correct viewing channel.
Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.
One touch power off [ System Standby ]
A Press and hold 2.
It turns off all linked devices.
Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.
One touch audio input switching
This unit is able to render the audio signals from the
active source. It switches automatically to the
corresponding audio input and output the sound from
its speakers system.
Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.
A Press DISC.
B Press OPTIONS.
C Press B.
D Select
[ EasyLink ]
, then press B.
Screen Saver
DivX(R) VOD Code
Sleep Timer
Display Dim
Disc Lock
OSD Language
EasyLink
Standby Mode
General Setup
Auto Wake-up TV
System Standby
System Audio Control
Audio Input Mapping
E Select [ System Audio Control ] > [ On ], then
press OK.
F Select [ Audio Input Mapping ], then press OK.
G Select [ OK ] in the menu, then press OK to start
scanning of devices.
H When the audio input menu is displayed, select an
input to map (e.g. AUX1 Input, AUX2 Input), then
press B.
I Select the correct device that connected to this
audio input, then press OK.
J
Repeat steps 8~9 to map other connected devices.
K To exit the menu, press OPTIONS.
Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
DVD Home Theatre (SoundBar)
Remote Control
and 2 batteries
Wall mount bracket
and 2 knobs
Micro bre
cleaning cloth
Subwoofer
User
Manual
Scart cable
Power cable
subwoofer
Satellite Receiver /
Cable Box
HDD / DVD Recorder
1
Connect
2
Set up
A
Find the viewing channel
A Press 2 to turn on this DVD Home Theatre unit.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Start Ambisound setup
When you turn on this DVD Home Theatre unit
(SoundBar) for the rst time, follow the instructions on
the TV to complete the setup.
Please choose your language:
Language
Select
Change
English
Dansk
Deutsch
Español
Français
Italiano
Stop: Exit
A Select a language for on-screen display, then press
B.
B [ Welcome ] message is displayed, press B to
continue.
C [ Orientation ] message is displayed, press B to
continue.
D Select a most suitable predefined setting according
to your room environment and setup, press B to
confirm and go to the next setup screen.
[ Room Acoustics ]
Select the type of walls that surround your room.
The default setting is [ Hard (concrete, wood) ].
[ Room Placement ]
Select the SoundBar placement position in your
room. The default setting is [ Middle of room ].
[ Height ]
Select the height at which the SoundBar is placed.
The default setting is between 0.8~1.2 metres.
[ Listening Position ]
Select the distance between the listening position and
the SoundBar. The default setting is between 2~3
metres.
E When [ Complete ] screen is displayed, press B to
exit.
Note Refer to the accompanying user manual
for other setup options.
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A Place the DVD Home Theatre unit (SoundBar) at the
normal listening ear-level, or at least above the kneelevel. Face it straight ahead towards the listening
area.
B Place the subwoofer on the floor, at least one metre
away from the TV.
B
Prepare for rear connections
A Push up the catches to lift up the rear cover.
B Connect the required cables (see the following
sections for details) and direct all the cables to the
CABLE OUT point.
Note All the cables must be placed properly inside
the rear panel in order for the rear cover to close.
C
Connect to TV
HDMI IN
HDMI OUT
SCART
SCART
z
Connect a scart cable from the SCART socket to
the SCART IN socket on your TV. Or;
z
If your TV supports HDMI, connect the HDMI cable
(not supplied) from the HDMI OUT socket to the
HDMI IN socket on your TV.
Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.
D
Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (not supplied) from the
AUDIO IN-AUX1 sockets to the AUDIO OUT sockets
on your TV.
Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until ‘AUX1 INPUT’ is displayed on the display panel.
DVD Home Theatre unit (rear)
DVD Home Theatre unit (rear)
E
Connect subwoofer
TO SUBWOOFER
LOUDSPEAKERS
z
Unwind the cables from TO MAIN UNIT on the
subwoofer, then connect the grey end cable to TO
SUBWOOFER socket and white end cable to
LOUDSPEAKERS socket on this DVD Home
Theatre unit.
F
Connect radio antenna and power
cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A
A Connect the FM antenna to the inner pin of the FM
75 socket (for some models, it has been
connected in the factory). Extend the wire for
optimum reception.
B Connect the power cable from subwoofer to the AC
power outlet.
Subwoofer (rear)
FM antenna
Subwoofer (rear)
Or
Loading...