Philips HTS6100 User Manual
Register your product and get support at
www.philips.com/welcome
HTS6100
EN DVD Home Theater System 5
AUSTRALIA - Philips Manufacturers Warranty for Australia only
These Warranty conditions are valid for the following consumer electronics products: Colour Televisions,
Projection TV, Plasma & LCD TV, DVD Players, DVD Recorders, DVD Recorders with HDD, Personal Video
Recorders, Audio Systems, Home Theatre systems, Digital Set Top Box, Digital Photo Display, MP3 players &
Portable Audio products.
The benefits given to the purchaser by this warranty are in addition to all other rights and remedies, which the
purchaser has in respect of the product under the Trade Practices Act or other Commonwealth or State Law.
Philips Consumer Electronics warrants its products to the purchaser
as follows and subject to the stated conditions.
U
1YYeeaarr Free Repair Service – at Philips ASC
1
Colour Television, Plasma Television, LCD Television, Projection Television
DVDR/VCR Combo, DVD Recorder with Hard Drive, Personal Video Recorder,
LCD Projector, Wireless Audio System, Audio System, Home Theatre System &
Digital Photo Display (Photo Frame) & Digital Set-Top-Box.
U
r Free Replacement – at your Retailer
11YYeeaar
Portable Audio, MP3 players, DVD Players, DVD/VCR Combo Players,
DVD Recorders without HDD & Portable DVD/LCD players.
UConditions of Repair Warranty
1. All claims for warranty service should be made to your nearest Philips Authorised
Service Centre or the Philips Technology Care Centre. Reasonable evidence of
date of purchase must be provided.
2. This warranty extends only to defects in material or workmanship occurring under
normal use of the product when operated in accordance with the instructions.
3. If a replacement product is supplied under the repair policy, it is warranted for the
remainder of the warranty period of the original purchased product only.
4. Home service is provided only within the normal service area of one of our
recommended Authorised Service Centres (ASC). It will be provided for television
receivers only with a screen size of 67cms or above (product includes CRT,
LCD TV, PTV, and Plasma TV). Televisions with screen sizes less than 67 cms
and all other product types are to be taken or sent by the consumer to the
workshop of your nearest Authorised Service Centre, at the Consumer’s
expense.
5. This Manufacturers Warranty is limited to 3 months for the above listed Consumer
Electronics Products if used in commercial applications.
6. Philips may, at its discretion choose to replace rather than repair any product
covered by this warranty.
7. Product accessories are covered by the same warranty period. Please contact the
Philips Technology Care Centre for free replacement of faulty accessories.
8. This Manufacturers Warranty is neither transferable nor valid in countries other
than Australia.
UThis warranty does not
cover:
a) Mileage or travel outside the
normal service area covered by
selected Authorised Service
Centre.
b) Service costs arising from failure
to correctly adjust the controls of
the product or to observe the
instructions, or inspections that
reveal that the product is in
normal working order.
c) Product failures caused by
misuse, neglect, accidental
breakage, transit damage,
inexpert repairs or modification
by un-authorised persons,
external fires, lightning strikes,
floods, vermin infestation or
liquid spillage.
d) Cleaning of video or audio
heads.
e) Inadequate receiving antennae.
f) Replacement of worn or used
batteries or other consumables.
g) Consumer products used in
commercial applications (This
warranty is limited to 3 months
only)
h) Second hand products.
The conditions contained in this warranty card replace and override the provision of the Philips World-Wide Guarantee for
Version 9: 1 February 2007 Warranty valid for all new products purchased after 1
products purchased in Australia and used in Australia.
st
January 2007
2
1
Philips Consumer Electronics a division of Philips Electronics Australia Limited ABN 24 008 445 743,
Service is provided through more than 100 accredited Authorised Service Centres throughout Australia.
For direct contact with the nearest recommended Authorised Service Centre in capital & regional cities/towns
Level 1, 65 Epping Road NORTH RYDE NSW 2113.
U
AAuutthhoorriisseeddSSeerrvviicceeCCeennttrreeNNeettwwoorrk
Customer support is provided in Australia by our trained call centre staff
For assistance with product features and specifications, please call
U
TTeecchhnnoollooggyyCCaarreeCCeennttrre
Please record the following information for your records and keep in a safe place.
We recommend retaining your purchase receipt to assist with any warranty claim
Model number : ………………………………………………………..
Serial number : ………………………………………………………..
Date of purchase : ………………………………………………………..
Retailer : ………………………………………………………..
e
k
Version 9: 1 February 2007 Warranty valid for all new products purchased after 1
st
January 2007
2
3
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS,
Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
HDMI, and HDMI logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other
DivX, DivX Ultra Certifi ed, and associated logos
are trademarks of DivX, Inc. and are used under
license.
Offi cial DivX® Ultra Certifi ed product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media fi les and the DivX® Media Format.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
CLASS 1
LASER PRODUCT
ENERGY STAR and the ENERGY
STAR mark are registered U.S. marks
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’
LASER
Type Semiconductor laser
•
GaAIAs
Wave length 645 - 660 nm (DVD)
•
770 - 800 nm (CD)
Output Power 6 mW (DVD)
•
7 mW (VCD/CD)
Beam divergence 60 degrees
•
4
Contents
1 Important 6
Safety and important notice 6
2 Your product 7
Features highlight 7
Product overview 8
3 Connect 11
Place the unit 11
Connect video cables 12
Connect subwoofer 14
Connect radio antenna 15
Connect audio cables/other devices 15
Mount the DVD Home Theater unit 17
4 Get started 19
Prepare the remote control 19
Find the correct viewing channel 20
Start Ambisound setup 20
Turn on Progressive Scan 22
Activate EasyLink control 23
Select a play source 24
6 Adjust sound 36
Control the volume 36
Adjust Bass/Treble 36
Select Ambisound 36
Select a preset sound effect 37
7 Adjust settings 38
General setup 38
Audio setup 40
Video setup 41
Preference Setup 43
8 Additional information 46
Update software 46
Care 46
Specifi cations 47
9 Troubleshooting 48
10 Glossary 50
English
Contents
5 Play 25
Play from disc 25
Play video 26
Play music 29
Play photo 30
Play from USB device 31
Play from portable media player 32
Play from iPod 32
Play from radio 34
EN 5
1 Important
Recycle notice
Safety and important notice
Warning!
Risk of fi re or electric shock!
Ensure that air can circulate freely through the
•
ventilation holes on this unit. Allow at least 5~10 cm
clear ance around the unit .
•
Never expose this unit to direct sunlight, naked
fl ames or heat.
•
Never place this unit on other elec trical equipment.
•
Keep away from this unit during lightning stor ms.
•
Never remove the casing of t his unit. Please leave all
maintenance work to qualifi ed personnel.
•
Keep this unit away from water, moisture and liquidfi lled objects.
Caution!
Remove batteries if they are exhausted or if the
•
remote control is not to be used for a long time .
•
Do not mix batteries (old and new or c arbon and
alkaline, etc.).
•
Batteries contain chemical substances, they should
be disposed of pr operly.
•
Visible and invisible laser radiation when open .
Avoid exposure to beam.
•
Wher e the MAINS plug or an appliance coupler is
used as the disconnec t device, the disconnect device
shall r emain readily oper able.
This electronic equipment contains a large
number of materials that can be recycled or
reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
6 EN
2 Your product
ALL
4
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.philips.com/welcome.
Ambisound
Philips Ambisound technology reproduces
multi-channel surround sound with fewer
speakers to give an embracing surround
experience without the hassle of setting up a
full range of speaker systems.
English
The all-in-one SoundBar DVD Home Theater is
designed to complement your home perfectly.
Enjoy the SoundBar DVD Home Theater with
state-of-the-art Ambisound surround sound and
picture quality without the clutter of multiple
speakers.
Features highlight
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD Home Theater offers full high-defi nition
video playback up to 1080p resolution for an
amazing viewing experience. A highly detailed
picture and increased sharpness delivers a more
true-to-life picture.
EasyLink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
USB direct and MP3 link
Simply plug your USB device into the USB jack
to play your MP3/WMA/JPEG/DivX fi les; or
plug your portable media player to the MP3
LINK jack to enjoy the music play in superb
sound quality.
Sync the audio output with the video play
This DVD Home Theater provides you the
feature of delaying the audio output if the video
signals that go directly to the TV is slower than
the audio streams.
Region codes
DVD movies are usually not released at the
same time in all regions of the world, thus all
DVD players are programmed to a specifi c
region code.
Countries DVD region code
Australia,
New Zealand
You r pr odu ct
Note
Philips does not guarantee 100% interoperability
•
with all HDMI CEC devices.
EN 7
Product overview
Remote control
a 2
Turn on this unit or turn off to standby
•
mode.
Press and hold to turn off this unit and
•
all the HDMI CEC compliant TV/
devices (for EasyLink control only.)
b Z (Open/Close)
Open or close the disc compartment.
•
c Source buttons
•
DISC: switch to DISC mode. While in
disc mode, access or exit disc menu.
•
USB: switch to USB mode.
•
RADIO: switch to FM or AM/MW
band.
•
AUX/DI /MP3 LINK: switch to AUX1
INPUT, AUX2 INPUT, AUX3 INPUT,
DIGITAL INPUT or MP3 LINK
corresponds to the jack you used to
connect the external device.
DOCK: switch to the iPod that is
•
connected to the docking station.
d INFO
Display the current status or disc
•
information.
Display photo fi les in 12 thumbnails
•
view.
e OPTIONS
Access or exit Options menu (this
•
menu provides various setting options.)
f u (Play/Pause)
Start or pause disc play.
•
RADIO: start auto radio installation
•
(only available for fi rst time setup.)
g x (Stop)
Stop disc play.
•
RADIO: erase the current preset radio
•
station.
that
8 EN
h TREBLE / BASS
•
Switch to treble or bass mode. Then
press VOL +- to set its level setting.
i AUDIO SYNC
•
Select an audio language/channel.
•
Press and hold to access audio sync
setting. Then press VOL +- to set
the audio delay time.
•
RADIO: toggle between FM stereo and
mono mode.
j SOUND
•
Select a predefi ned sound effect.
k REPEAT / PROGRAM
•
Select various repeat or shuffl e modes;
turns off repeat or shuffl e mode.
•
RADIO: press this button to start
manual radio preset.
•
RADIO: press and hold this button to
start automatic radio preset.
l OK
•
Confi rm an entry or selection.
m Cursor buttons (v V b B)
•
Navigate through the on-screen menu.
•
Press left or right for fast backward or
forward search.
•
•
: press up or down to tune the
RADIO
radio frequency.
RADIO: press left or right to start auto
search.
n BACK / TITLE
Return to the previous display menu.
•
For DVD, go to title menu.
•
For VCD version 2.0 or SVCD with
•
PBC turned on: return to the menu
during playback.
o í/ ë (Previous/Next)
•
Skip to the previous or next title/
chapter/track.
•
RADIO: select a preset radio station.
p H (Mute)
•
Mute or restore the volume.
q VOL +-
•
Adjust the volume level.
r AMBISOUND
•
Select different surround sound
output: auto, multi-channel or stereo.
s Numeric buttons
•
Enter a preset number or item to play.
t SUBTITLE
• Select DVD or DivX subtitle language.
u HDMI / ANGLE
•
Select a video resolution setting for
HDMI output.
•
Press and hold to select a different
viewing angle of a DVD movie.
v ZOOM
Zoom in or out the picture on the TV.
•
English
You r pr odu ct
EN 9
Main unit
10
8
9
MP3 LINK
a 2 STANDBY-ON
Turn on this unit or turn off to standby
•
mode.
Press and hold to turn on this unit from
•
a low power standby mode.
b SOURCE
Select a play media: DISC, USB, DOCK,
•
RADIO AM/MW, DIGITAL INPUT,
AUX1 INPUT, AUX2 INPUT, AUX3
INPUT or MP3 LINK.
c VOL +-
Adjust the volume level.
•
d PLAY PAUSE u
•
Start or pause disc play.
•
RADIO: start auto radio installation
(only available for fi rst time setup.)
STOP x
Stop disc play.
•
RADIO: erase the current preset radio
•
station.
e OPEN CLOSE Z
Open or close the disc compartment.
•
45
3
7
6
2
f Display panel
g Disc compartment
Note
The following connections are located at the left side
•
panel of the unit.
h MP3 LINK jack
To connect portable audio player.
•
i (USB) jack
• To connect USB fl ash drive, USB
memory reader or digital camera.
j DOCK jack
• To connect the supplied iPod docking
station.
1
10 EN
3 Connect
This section describes the basic connections
required for this DVD Home Theater unit
before it can be used.
Basic connections:
Place the unit
•
Connect video cables
•
Connect subwoofer
•
Connect radio antenna
•
Optional connections:
Connect audio cables/other devices
•
Connect audio from TV
•
Connect audio from cable box/
•
recorder/game console
Connect portable media player
•
Connect USB device
•
Connect iPod docking station
•
Mount the DVD Home Theater unit
•
Note
Refer to t he type plate at the rear or bottom of the
•
product for identifi cation and supply ratings.
•
Befor e you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Place the unit
Place this unit on top of a table or mount it
•
on the wall (see chapter ‘Mount the DVD
Home Theater unit’.)
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where
•
the AC power plug can be easily reached.
1 Place this DVD Home Theater unit near to
the TV.
•
Place it at a height that is closest to the
listening ear-level.
2 Position this DVD Home Theater so that it
is directly parallel to the listening area.
English
Connect
3 Place the subwoofer at the corner of the
room or at least one meter away from the
TV.
Note
You may purchase a separate table top sta nd that
•
can suppor t both your Philips Plasma/LCD TV and
this DVD Home Theater unit from the nearest
Philips retailers.
EN 11
Connect video cables
Before you connect
This section describes how to connect this
DVD Home Theater unit to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
Option 1: Connect to HDMI jack (for a
•
HDMI, DVI or HDCP-compliant TV.)
Option 2: Connect to component video
•
jack (for a standard TV or Progressive Scan
TV.)
Option 3: Connect to video (CVBS) jack
•
(for a standard TV.)
Note
You must connect this unit directly to a T V.•
1 Push up the catches at the bottom of the
rear cover and lift it up.
2 Connect the cables to the corresponding
jacks and direct the cables to the CABLE
OUT point.
12 EN
3 Once complete, close the rear cover.
Note
All the cables must be placed proper ly inside the rear
•
panel in order for the rear cover to close.
Option 1: Connect to HDMI jack
HDMI OUT
HDMI IN
1 Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
jack on your TV.
Note
The HD MI connector is only compatible with HDMI
•
compliant TVs and DVI-TVs.
Option 2: Connect to component
video jack
COMPONENT
VIDEO OUT
English
Connect
Tips
To optimize t he video output, see chapter ‘Adjust
•
settings’ > [ Video Setup ] > [ HDMI Setup ] for
details.
•
This unit is HDMI CEC compatible. It enables
connected T V/device to control each other over
HDMI, see chapter ‘Activate EasyLink control’ for
details.
•
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
•
To route the audio from your T V to this DVD Home
Theater unit, connect an audio cable from the audio
input on this unit to the audio ou tput on your TV.
•
This t ype of connections provide best pic ture qualit y.
1 Connect the component video cables (not
supplied) from the Y P
unit to the component video input jacks
on your TV.
If a progressive scan TV is used, you
•
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details.)
Tips
The component video input jack on your T V may be
•
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This t ype of connections provide good picture
quality.
B PR jacks on this
EN 13
Option 3: Connect to Video (CVBS)
jack
1 Connect a composite video cable
(supplied) from the VIDEO OUT jack on
this unit to the video input jack on your
TV.
Tips
The video input jack on your TV may be labeled as
•
A/ V IN, VIDEO IN, COMP OSITE or BASEBAND.
This t ype of connections provide standard pic ture
•
quality.
Connect subwoofer
1
2
LOUDSPEAKERS
3
TO SUBWOOFER
1 Unwind the subwoofer’s interconnect
cable at TO MAIN UNIT.
2 Connect the white end of the interconnect
cable to the LOUDSPEAKERS jack on this
unit.
3 Connect the gray end of the interconnect
cable to the TO SUBWOOFER jack on
this unit.
14 EN
Connect radio antenna
3
4
2
1
1 Stand the AM/MW loop antenna
(supplied) upright to fi x its claw into the
slot.
2 Connect the AM/MW loop antenna to the
AM/MW jack. Then place the AM/MW
loop antenna on a shelf, or attach it to a
stand or wall.
3 Connect the FM antenna (supplied) to the
FM75Ω jack on this unit (for some models,
this cable has been connected). Extend the
FM antenna and fi x its ends to the wall.
4 Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theater unit.
Connect audio cables/other
devices
This section describes how you can route the
sound from other devices to this DVD Home
Theater unit in order to enjoy sound output or
audio play with multi-channel surround
capabilities.
Connect audio from TV
(also used for EasyLink control)
1 Connect an audio cable (not supplied)
from the AUDIO IN-AUX1 jacks on this
unit to the AUDIO OUT jacks on your TV.
Note
To listen to t he audio outpu t from this connection,
•
press AUX/DI /MP3 LINK repeatedly until ‘AUX1
INPUT’ is displayed on the display panel.
English
Connect
EN 15
Connect audio from cable box/
recorder/game console
Connect to digital jack
You can choose to connect to analog or digital
jack depending on the device capabilities.
Connect to analog jacks
1 Connect an audio cable (not supplied)
from the AUDIO IN-AUX2 or AUX3
jacks on the subwoofer to the AUDIO
OUT jacks on the device.
COAXIAL
DIGITAL IN
1 Connect a coaxial cable (not supplied)
from the DIGITAL IN-COAXIAL jack on
the subwoofer to the COAXIAL/DIGITAL
OUT jack on the device.
Note
To listen to t he audio outpu t from this connection,
•
press AUX/DI /MP3 LINK repeatedly until ‘DIGITAL
INPUT’ is displayed on the display panel.
Connect portable media player
Note
To listen to t he audio outpu t from this connection,
•
press AUX/DI /MP3 LINK repeatedly until ‘AUX2
INPUT’ or ‘AUX3 INPUT’ is dis played on the display
panel.
16 EN
MP3
1 Connect a 3.5mm stereo audio cable (not
supplied) from the MP3 LINK jack on this
unit to the phone jack on your portable
media player (such as MP3 player.)
Note
To listen to t he audio outpu t from this connection,
•
press AUX/DI /MP3 LINK repeatedly until ‘M P3
LINK’ is displayed on t he display panel.
Connect USB device
Mount the DVD Home
Theater unit
Caution!
Risk of personal injury and damage to the unit.
•
Allow only qualifi ed persons to mount the unit .
English
1 Connect the USB device to (USB) jack
on this unit.
Note
This DVD Home Theater unit can only play/view
•
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
•
To listen to t he audio outpu t from this connection,
press USB.
Connect iPod docking station
DOCK
1 Connect the iPod docking station to
DOCK jack on this unit.
Note
This DVD Home Theater unit only support audio
•
play from your iPod.
To listen to t he audio outpu t from this connection,
•
press DOCK.
1 Ensure all the required cables are
connected to this unit and close the rear
cover.
2 Attach the supplied knobs to the rear of
this unit.
3 Turn this unit over so that its bottom faces
up.
4 Hold this unit fi rmly while removing the
rubber feet by pushing it towards the back
of this unit. Repeat the step to remove the
other rubber feet.
Connect
EN 17
Loading...