Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
HTS5500C
001-051-hts5500-55-Eng305/04/05, 4:16 PM1
1
3139 246 14793
México
(
Es necesario que lea cuidadosamente su instructivo de
manejo.
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
Descripción:Sistema receptor/reproductor de DVD
Modelo :HTS5500S/55
Alimentación:110–127 / 220–240V~; 50–60 Hz
Consumo:380 W
Importador:Philips Mexicana, S.A. de C.V.
Domicilio:Av. La Palma No. 6
Localidad y Tel: Edo. de México C.P. 52784
Exportador:Philips Electronics HK, Ltd.
País de Origen: China
Nº de Serie:______________________________
ATENCIÓN
Col. San Fernando La Herradura
Huixquilucan
Tel. 52 69 90 00
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
AVISO IMPORTANTE
Philips Mexicana, S.A. de C.V.no se hace
responsable por daños o desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de
insectos o roedores (cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado
de acuerdo con el instructivo del uso, fuera
de los valores nominales y tolerancias de las
tensiones (voltaje), frecuencia (ciclaje) de
alimentación eléctrica y las características
que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como:
temblores, inundaciones,incendios, descargas
eléctricas, rayos etc. o delitos causados por
terceros
2
001-051-hts5500-55-Eng305/04/05, 4:16 PM2
choques asaltos, riñas, etc.).
3139 246 14793
General Information
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries
and old equipment.
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on apparatus.
Laser safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
USE OF CONTROLS OR
ADJUSTMENTS OR
PERFORMANCE OF
PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS
RADIATION EXPOSURE.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
001-051-hts5500-55-Eng305/04/05, 4:16 PM3
3
3139 246 14793
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
DivX®, DivX Certified, and
associated logos are
trademarks of
DivXNetworks, Inc and are
used under license.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and
the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from
Digital Theater Systems, Inc. U.S. Pat.
Noís. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents
issued and pending. “DTS” and “DTS
Digital Surround” are registered
trademarks of Digital Theater Systems,
Inc. Copyright 1996, 2003 Digital Inc.
All Rights Reserved.
LASER
TypeSemiconductor laser
GaAlAs
Wave length650~660 nm (DVD)
784~796 nm (CD)
Output Power7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the bottom of your DVD VIDEO player
and enter below the Serial No. Retain this
information for future reference.
Model No. DVD VIDEO HTS5500C
Serial No. _______________
4
001-051-hts5500-55-Eng305/04/05, 4:16 PM4
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTRE’.
Language Code ................................. 147
English
001-051-hts5500-55-Eng305/04/05, 4:16 PM7
7
3139 246 14793
10 cm
(4 inches)
10 cm
(4 inches)
10 cm
(4 inches)
DVD Home Cinema System
PHILIPS
General Information
English
Supplied accessories
Composite video
cable (yellow)
Audio cables
(red/white)
Interconnect cable
FM wire antenna
MW loop antenna
Remote control
and two batteries
(12nc: 3139 258 70091)
Speaker brackets
and screws
(4x)
Care and safety information
Avoid high temperatures, moisture,
water and dust
– Do not expose the system, batteries
or discs to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight.) Always
keep the disc tray closed to avoid getting
dust on the lens.
Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
Do not block the vents
– Do not operate the DVD system/AV
Subwoofer in an enclosed cabinet and allow
about 10 cm (4 inches) of free space all
around the player for adequate ventilation.
Care of disc
– To clean a CD, wipe it in a
straight line from the center
toward the edge using a soft,
lint-free cloth. Do not use
cleaning agent, as they may
damage the disc.
– Write only on the printed side of a
CD-R/CD-RW and only with a soft felttipped pen.
– Handle the disc by its edge, do not
touch the surface.
8
001-051-hts5500-55-Eng305/04/05, 4:16 PM8
Care of the cabinet
– Use a soft cloth slightly moistened
with a mild detergent solution. Do not
use a solution containing alcohol, spirits,
ammonia or abrasives.
Finding a suitable location
– Place the player on a flat, hard, stable
surface.
3139 246 14793
Connections
1
1
3
3
2
4
2
Step 1: Set-up the speakers
You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself in order to
avoid unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
– The rear speakers are labeled as REAR L
(left) or REAR R (right).
– The front speakers are labeled as
FRONT L (left) or FRONT R (right).
Step 2: Placing the speakers
and AV subwoofer
DVD SystemCentre speaker
Front Right
Speaker
Rear Right
speaker
Rear Left
speaker
Front Left
Speaker
AV Subwoofer
For best possible surround sound, all the
speakers (except AV subwoofer) should
be placed at the same distance from the
listening position.
1 Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
2 Place the center speaker above the TV or
the DVD system so that the center
channel’s sound is localized.
3 Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
4 Place the AV subwoofer on the floor near
the TV.
Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– Allow adequate ventilation around the
DVD system.
English
001-051-hts5500-55-Eng305/04/05, 4:16 PM9
3139 246 14793
9
Connections (continued)
English
Step 3: Connecting the DVD
system, speakers and
AV subwoofer
VIDEO OUT
Y
COMPONENT
L
R
AUX-INTV-IN
S-VIDEO
PB
PR
VIDEO
LINE-OUT
TO AV SUBWOOFER
TO AV SUBWOOFER
FM
ANT
MW
ANT
Front Left
Speaker
Center Speaker
1 Connect the supplied speaker to the rear
of the AV subwoofer using the fixed
speaker cables by matching the colours of
the jacks and speaker connectors.
2 Use the inter-connect cable to connect the
DVD system’s TO AV SUBWOOFER
socket to the TO DVD SYSTEM socket
at the back of the AV subwoofer.
COAXIAL
DIGITAL IN
DVD System
FRONT
CENTERREAR
LEFT
FRONT
RIGHT
TO DVD
SYSTEM
REAR
LEFT
RIGHT
Front Right
Speaker
FRONT
CENTERFRONT
TO DVD
LEFT
SYSTEM
~ AC
MAINS
REAR
REAR
RIGHT
LEFT
RIGHT
Rear Right
Speaker
AV Subwoofer
Rear Left
Speaker
Helpful Hints:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to a shortcircuit.
– To prevent unwanted noise, do not place
the AV subwoofer too close to the DVD
system, AC power adapter, TV or other
radiation sources.
10
001-051-hts5500-55-Eng305/04/05, 4:16 PM10
3139 246 14793
Step 4: Connecting to TV
FM
ANT
S-VIDEO
L
R
AM
ANT
PR
PB
Y
VIDEO OUT
AUX-INTV-IN
LINE-OUT
VIDEO
COAXIAL
DIGITAL IN
TO AV SUBWOOFER
Connections (continued)
English
FM
ANT
AM
ANT
VIDEO OUT
PB
Y
PR
L
R
LINE-OUT
AUX-INTV-IN
COAXIAL
S-VIDEO
DIGITAL IN
VIDEO
TO AV SUBWOOFER
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD system directly
to the TV.
– Proceed to page 19 for setting up
the TV once you have completed
the connections.
Option 1: Using Composite Video
jack
1 Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO jack to the video input jack
(labelled as A / V In, Video In, CVBS,
Composite or Baseband) on the TV.
IMPORTANT!
S-Video connection provides better
picture quality. This option must be
available on your TV.
Option 2: Using S-Video jack
1 Use an S-video cable (not supplied) to
connect the DVD system’s S-VIDEO
jack to the S-Video input jack
(labelled as Y/C or S-VHS) on the TV.
2 To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO-TV IN jacks to the corresponding
AUDIO OUT jacks on the TV.
2 To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO-TV IN jacks to the corresponding
AUDIO OUT jacks on the TV.
11
001-051-hts5500-55-Eng305/04/05, 4:16 PM11
3139 246 14793
Connections (continued)
S-VIDEO
PR
PB
VIDEO OUT
AUX-INN
LINE-OUT
VIDEO
COAXIAL
DIGITAL IN
TO AV SUBWOOFER
3
2
1
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
ANT IN
English
FM
ANT
AM
ANT
VIDEO OUT
Y
L
R
AUX-INTV-IN
S-VIDEO
COAXIAL
PB
PR
LINE-OUT
DIGITAL IN
VIDEO
TO AV SUBWOOFER
IMPORTANT!
The progressive scan video quality is
only possible when using Y Pb Pr
and a progressive scan TV is
required.
Option 3: Using Component
(Y Pb Pr) Video jack
1 Use the component video cables (red/
blue/green - not supplied) to connect the
DVD system’s Y Pb Pr jacks to the
corresponding component video input
jacks (or labeled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
2 To hear the TV channels through this
DVD system, use the audio cables (white/
red - supplied) to connect the DVD
system’s TV IN jacks to the audio input
jacks on the TV.
3 Proceed to page 20 for detailed
Progressive Scan set up.
IMPORTANT!
If your TV only has a single Antenna In
jack (labelled as 75 ohm or RF In),
you will need an RF modulator in
order to view DVD playback on the
TV. See your electronics retailer or
contact Philips for details on RF
modulator availability and operations.
Using an accessory RF modulator
1 Use the supplied composite video cable
(yellow) to connect the DVD system’s
CVBS jack to the video input jack on the
RF modulator.
2 Use an RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the TV.
3 Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
12
001-051-hts5500-55-Eng305/04/05, 4:16 PM12
3139 246 14793
T
L
Connections (continued)
O
COAXIAL
DIGITAL IN
BWOOFER
TV
~ AC
MAINS
TO DVD
SYSTEM
FRONT
LEFT
CENTERFRONT
RIGHT
REAR
LEFT
REAR
RIGHT
Step 5: Connecting FM/MW
antennas
fix the claw
into the slot
➠
FM
antenna
2
1
MW
antenna
FM
ANT
AM
ANT
VIDEO OU
Y
L
R
1 Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
2 Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fix
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Step 6: Connecting the
power cord
English
PB
AUX-INTV-IN
After everything is connected
properly, plug the AC power cord
into the power outlet.
The ECO POWER LED on the DVD
system and AV Subwoofer LED will light
up. Never make or change any
connections with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear of the
AV subwoofer for identification and supply
ratings.
DVD system
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
13
001-051-hts5500-55-Eng305/04/05, 4:16 PM13
3139 246 14793
Optional Connections
English
Connecting a VCR or
Cable/Satellite Box
L
R
VIDEO OUT
Y
COMPONENT
AUX-INTV-IN
PB
PR
LINE-OUT
4
2
FM
ANT
MW
ANT
Viewing and listening to the
playback
1 Connect the VCR or Cable/Satellite Box
to the TV as shown.
2 Connect the DVD system’s AUX IN
(R/L) jacks to the AUDIO OUT jacks on
the VCR or cable/satellite box.
Press SOURCE to select “AUX/
ANALOG” in order to activate the input
source.
1
S-VIDEO
VIDEO
TO AV SUBWOOFER
~ AC MAINS
VCR or Cable/
Satellite Box
3
COAXIAL
DIGITAL IN
DVD System
Using the VCR for recording DVD
playback
Some DVDs are copy-protected. You
cannot record or dub protected discs
using a VCR.
3 Connect the DVD system’s S-VIDEO
jack to the S-VIDEO IN jack on the VCR.
4 Connect the DVD system’s LINE OUT
(R/L) jacksto the AUDIO IN jacks on
the VCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
14
001-051-hts5500-55-Eng305/04/05, 4:16 PM14
To view DVD playback while
recording,
you must connect the DVD system to
your TV using a VIDEO OUT (as shown
above) connection.
3139 246 14793
Optional Connections (continued)
Connecting digital audio
equipment
(for example)
Set-Top Box/
Game Console
English
FM
ANT
MW
ANT
VIDEO OUT
Y
COMPONENT
L
R
AUX-INTV-IN
S-VIDEO
COAXIAL
PB
PR
LINE-OUT
DIGITAL IN
VIDEO
TO AV SUBWOOFER
Listening to the playback
● Connect the DVD system’s DIGITAL
IN jackto the DIGITAL OUT jack on a
digital audio device.
Press SOURCE to select “AUX/
DIGITAL” in order to activate the input
source.
Helpful Hints:
– Always refer to the user manual of the
other equipment for complete connection
and use details.
– For your playback through DIGITAL IN
connection, set the digital output of that
player to PCM format.
001-051-hts5500-55-Eng305/04/05, 4:16 PM15
15
3139 246 14793
Remote Control
English
1
2
3
4
5
6
7
8
9
0
!
@
TV: switches to TV source mode / *will
switch Philips TV to AV source.
The sound from TV will come out
through the DVD system.
TUNER: toggles between FM and MW
band.
AUX/DI: toggles between AUX and
DIGITAL IN external source mode.
3 VOL +-
– Adjusts the volume level.
4 1 2 3 4
– DISC: selects movement direction in the
menu or use 1 2 to search backward/
forward when not in menu.
– TUNER: use 1 2 to tune the radio
frequency up/down, use 3 4 to start
auto tuning.
5 S / T
– DISC: *searches backward/forward or
selects a track.
– TUNER: selects a preset radio station.
6 PAUSE Å
– DISC: pauses playback.
7 ZOOM
– DISC: enlarges a picture on the TV screen.
1 B
– Switches to Eco Power standby mode, or
turns on the system.
2 Source buttons
DISC 1-2-3-4-5: switches to DISC
source mode and select a desired disc
tray for playback.
* = Press and hold the button for more than two seconds.
16
001-051-hts5500-55-Eng305/04/05, 4:16 PM16
8 SCAN
– DISC: preview the contents of a VCD or
plays the first few seconds of each track
within an Audio CD.
9 DISPLAY
– DISC: displays the current status or disc
information and turns off PBC VCD2.0 (if
PBC was on).
0 REPEAT A-B
– DISC: repeats a specific section on a disc.
! TV VOL +-
– Adjusts TV volume (Philips TV only.)
@ SLEEP
– Sets the sleep timer function.
3139 246 14793
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.