Philips HTS3565 User Manual

Enjoy

Start disc playback

A Press ç to open the disc tray.

B Place a disc with the disc label facing up. C Press ç to close the disc tray. D Playback starts automatically. E If the disc menu appears on the TV, use  

keys or the numeric keypad to select an option in the menu and press OK to start playback.

To enjoy the powerful surround sound

from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode.

F Press



to stop playback.

Note When you press u button, playback resumes from where it last stopped. To start playback from the beginning, you have to press .

Playback other supported devices

MIC LEVEL

MP3 LINK

MIC

USB device

A Insert your USB device to the USB socket. B Press USB to switch to ‘USB’ mode. C Press u to start playback. D To stop playback, press DISC to switch to ‘DISC’

mode. You can unplug your USB device now.

MIC LEVEL

MP3 LINK

MIC

Other portable audio player

A Use a 3.5mm stereo audio cable (not supplied) to

connect the headphone output socket on your portable audio player to MP3 LINK socket.

B Press PLAY on your portable audio player. C Press AUX (MP3 LINK) repeatedly until

‘MP3 LINK’ is displayed to listen to the playback.

Need help?

User Manual

See the user manual that came with your Philips DVD Home Theatre System.

www.philips.com

www.philips.com/welcome

Connect

Set up

Enjoy

HTS3565

Quick Start Guide

What’s in the box?

Main Unit

Remote Control

and 2 batteries

User

Manual

1 centre, 2 front, 2 rear speakers

and subwoofer

SLEEP

Composite video cable

Power cable

FM wire antenna

MIC

MP3 LINK

MIC LEVEL

MIC

MP3 LINK

MIC LEVEL

SLEEP

hts3565_98_qsg_eng5_final808.ind1 1hts3565_98_qsg_eng5_final808.ind1 1 2008-02-19 2:45:24 PM2008-02-19 2:45:24 PM

Connect

Placement

Proper speakers system placement is important to ensure optimum sound performance.

FRONT RIGHT

SUBWOOFER

FRONT LEFT

CENTER

REAR RIGHT

REAR LEFT

A Place the centre speaker above or close to the TV. B Place the subwoofer on the floor, at least one metre

away from the TV.

C Place the front speakers at equal distances from the

TV.

D Place the rear speakers at the back or beside the

listening position.

Connect the main unit to TV

VIDEO IN

(CVBS)

Use the supplied composite video cable to connect

the CVBS socket on the main unit to the VIDEO IN socket on your TV.

Note If your TV supports HDMI, connect this unit to your TV using HDMI connection for better picture quality. See the accompanying user manual for more information.

Set up

Connect the speakers and subwoofer

Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit.

Finding the viewing channel

A Press 2 (Standby-On) on the main unit to turn it

on.

B Turn on the TV. Use the TVs remote control to

select the correct viewing channel.

Note To search for the correct viewing channel, press the Channel Down button on the TVs remote

control repeatedly (or AV, SELECT,

° button) until

you see the Video In channel.

Select the display language on the

screen

A Press OPTIONS.

The { General Setup } appears.

B Press



Press OPTIONS to exit menu

General Setup

Disc Lock

Display Dim

OSD Language

Screen Saver

DivX(R) VOD Code

Sleep

English

Malayu

Auto

C Use  keys to select { OSD Language } and press

.

D Use  keys to select a language option in the

menu and press OK to confirm.

E Press OPTIONS to exit.

Note The language set here is only for the menus

that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu.

There are various setup options (Audio Setup, Video Setup, Preferences) available on this Home Theatre System. Refer to the user manual for more information.

Connect the radio antenna and

power cable

Keep the antennas away from the electronic devices to prevent unwanted interference.

A Connect the FM antenna to the inner pin of the FM

75  socket. (For some models, it has been connected in the factory.) Extend the wire for optimum reception.

B Connect the power cable from the main unit to the

AC power outlet.

Connect audio output from TV

(optional)

To hear the TV audio through this unit, use a red and white audio cables (not supplied) to connect the AUDIO IN-AUX sockets on the main unit to the AUDIO OUT sockets on your TV.

AUDIO

OUT

Note When watching the TV programs, you can press AUX (MP3 LINK) repeatedly on the remote control until ‘AUX 1’ or “AUX 2’ is displayed to get the sound output from the speakers.

Main Unit (rear)

Television (rear)

Main Unit (rear)

FM antenna

SUBWOOFER

FRONT

RIGHT

FRONT

LEFT

REAR

RIGHT

REAR

LEFT

FRONT CENTER

Main Unit (rear)

Main Unit (Front)

Standby button

Television (rear)

VIDEO IN (CVBS)

hts3565_98_qsg_eng5_final808.ind2 2hts3565_98_qsg_eng5_final808.ind2 2 2008-02-19 2:45:27 PM2008-02-19 2:45:27 PM

AUDIO OUT

AUDIO IN