Philips HTS3545, HTS3545-98 User Manual

3
Enjoy
DVD HOME THEATER SYSTEM
Quick Start Guide
Connect
Set up
Enjoy
What’s in the box?
HTS3548
Main Unit
Remote Control
and 2 batteries
User
Manual
1 center, 2 front, 2 rear speakers
and subwoofer
FM wire
antenna
AM/MW
loop antenna
MP3 LINE-IN cable
Composite video cable
Power cables
Start disc playback
A Press OPEN/CLOSE ç to open the disc tray.
B Place a disc with the disc label facing up. C Press OPEN/CLOSE ç to close the disc tray. D Playback starts automatically. E If the disc menu appears on the TV, use  
keys or the numeric keypad to select an option in the menu and press OK to start playback.
z
To enjoy the powerful surround sound
from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode.
F Press
to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start playback from the beginning, you have to press
.
Playback other supported devices
USB
USB device
A Insert your USB device to the USB socket. B Press DISC/USB to switch to ‘USB’ mode. C Press u to start playback. D To stop playback, press DISC/USB to switch to
‘DISC’ mode. You can unplug your USB device now.
Other portable audio player
A Use the supplied MP3 LINE-IN cable to connect the
headphone output socket on your portable audio player to MP3 LINE-IN socket.
B Press PLAY on your portable audio player. C Press MP3 LINE-IN to listen to the playback.
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/support
2007 C Koninklijke Philips N.V. All rights reserved.
www.philips.com
-
1
Connect
A
Placement
Proper speakers system placement is important to ensure optimum sound performance.
A Place the center speaker above or close to the TV. B Place the subwoofer on the floor, at least one meter
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
Pr
COAXIAL
CVBS
S-VIDEO
Pb
Y
VIDEO OUT
VIDEO IN
(CVBS)
z
Connect a composite video cable (supplied) from the
CVBS jack on the main unit to the VIDEO IN jack on your TV.
Note It is important to connect the main unit directly to your TV.
2
Set up
A
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel, press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
B Press to select { OSD Language } and press . C Use  keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theater System. Refer to the user manual for more information.
D
Connect the radio antennas
Keep the antennas away from the electronic devices to prevent unwanted interference.
A
B
A Connect the FM antenna to the inner pin of the
FM 75 jack. For optimum reception, extend the wire and fix its end to the wall.
B Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into the AM/MW jacks.
C Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV jacks on the main unit to the AUDIO OUT jacks on your TV.
AUDIO
OUT
Note Press TV on the remote control to get the sound output from the speakers system when watching the TV programs.
Main Unit (rear)
Television ( rear)
Main Unit (rear)
Television ( rear)
FM antenna
AM/MW antenna
ไทย
C
Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit.
Main Unit (rear)
Main Unit (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTRE
REAR
LEFT
FRONT LEFT
REAR RIGHT
VIDEO IN (CVBS)
CENTER
FRONT RIGHT
SUBWOOFER
DOCK
SPEAKERS
AM/ MW
AUDIO OUT
AUDIO OUT
AUDIO IN
SETUP
STANDBY-ON
General Setup Page
Disc Lock Display Dim Program
OSD Language
Screen Saver Sleep DivX(R) VOD Code
English
Melayu
Русский
Loading...