Philips HTD5510X 78, HTD5540X 78, HTD5570X 78 User Manual

Always there to help you

Question?

Contact

Philips

Question?

Contact

Philips

www.philips.com/welcome

HTD5510 HTD5540 HTD5570

User manual

1 Important 2

Safety 2 Care for your product 3 Care of the environment 3

2 Your home theater 4

Main unit 4 Remote control 4 Connectors 5

3 Connect and set up 7

Connect speakers 7 Connect to TV 8 Connect audio from TV and other

devices 9 Set up speakers 10 Set up EasyLink (HDMI-CEC control) 10

4 Use your home theater 12

Discs 12

Data les 13

USB storage devices 14 Audio, video, and picture options 14 Radio 15 MP3 player 16 Choose sound 16

8 Troubleshooting 23

9 Notice 25

10 Language code 26

11 Index 27

5 Change settings 17

Language settings 17 Picture and video settings 17 Audio settings 18 Parental control settings 18 Display settings 18 Energy saving settings 18 Restore default settings 19

6 Update software 20

Check software version 20 Update software through USB 20

7 Productspecications 21

1EN

1 Important

Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

Riskofelectricshockorre!

• Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.

• Never place the product and accessories near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation slots or other openings on the product.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord, always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different.

Riskofinjuryordamagetothehometheater!

• For wall-mountable products, use only the supplied wall mount bracket. Secure the

wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.

• For speakers with stands, use only the supplied stands. Secure the stands to the speakers tightly. Place the assembled stands

on at, level surfaces that can support the

combined weight of the speaker and stand.

• Never place the product or any objects on power cords or on other electrical equipment.

• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.

• Visible and invisible laser radiation when open. Avoid exposure to beam.

• Do not touch the disc optical lens inside the disc compartment.

• Parts of this product can be made of glass. Handle with care to avoid injury and damage.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or carbon and alkaine, etc.).

• Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.

• Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

• Batteries contain chemical substances, they should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach

2 EN

of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.

• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.

• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.

• If the battery compar tment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.

This is CLASS II apparatus with double insulation, and no protective earth provided.

Care for your product

Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Your product contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area.

• Do not insert any objects other than discs into the disc compartment.

• Do not insert warped or cracked discs into the disc compartment.

• Remove discs from the disc compartment if you are not using the product for an extended period of time.

• Use only microber cloth to clean the

product.

Care of the environment

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

3EN

2 Your home

theater

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your home theater at www.philips.com/welcome.

Main unit

a Disc compartment b Display panel c (Open/Close)

Open or close the disc compartment.

d (Play/Pause)

Start, pause or resume play.

e SOURCE

Select an audio or video source for the home theater.

f (Standby-On)

Switch the home theater on or to standby.

f g

j k

Remote control

This section includes an overview of the remote control.

4 EN

a (Standby-On)

• Switch the home theater on or to standby.

• When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby.

b Source buttons

• DISC: Switch to disc source.Access or exit the disc menu when you play a disc.

• AUDIO SOURCE: Select an audio input source.

• RADIO: Switch to FM radio.

• USB: Switch to USB storage device.

c Navigation buttons

• Navigate menus.

• In video mode, press left or right to

fast backward or fast forward; press up or down to slow forward or slow backward (for DVD video only).

• In radio mode, press left or right to search a radio station; press up or

down to ne tune a radio frequency.

d OK

Conrm an entry or selection.

e BACK

Return to a previous menu screen.

f +/-

Increase or decrease volume.

g (Mute)

Mute or restore volume.

h / (Previous/Next)

• Skip to the previous or next track, chapter or le.

• In radio mode, select a preset radio

station.

i Numeric buttons

Select an item to play.

j SOUND

Select a sound mode.

k SURR

Select surround sound or stereo sound.

l (Play/Pause)

Start, pause or resume play.

m (Stop)

Stop play.

n OPTIONS

Access more play options while playing a disc or a USB storage device.

o (Open/Close)

Open or close the disc compartment.

p (Home)

Access or exit the home menu.

q AUDIO SYNC

• Select an audio language or channel.

• Press and hold to access audio delay

setting, then press Navigation buttons (left/right) to delay the audio to match the video.

Connectors

This section includes an overview of the connectors available on your home theater.

Front

a (USB)

Audio, video or picture input from a USB storage device.

b AUDIO IN

Audio input from an MP3 player (3.5mm jack).

Back connectors

a AC MAINS

Fixed AC power cable.

5EN

b SPEAKERS

Connect to the supplied speakers and subwoofer.

c VIDEO OUT

Connect to the composite video input on the TV.

d AUDIO IN-AUX

Connect to an analog audio output on the TV or an analog device.

e DIGITAL IN-OPTICAL

Connect to an optical audio output on the TV or a digital device.

f HDMI OUT (ARC)

Connect to the HDMI input on the TV.

g FM ANTENNA

Connect the supplied antenna for radio reception.

6 EN

3 Connect and set

This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Connect speakers

The speaker cables are color-coded for easy connection. To connect a speaker to your home theater, match the color on the speaker cable to the color on the connector.

Speaker position plays a critical role in setting up a surround sound effect. For best effect, position all the speakers towards the seating position and place them close to your ear level (seated).

SUB

WOOFER

FRONT

LEFT

REAR LEFT

FRONT

CENTER

FRONT RIGHT

REAR RIGHT

* The actual speaker shapes may vary from the illustration above.

Note

• Surround sound depends on factors such as room

shape and size, type of wall and ceiling, windows and

reective surfaces, and speaker acoustics. Experiment with the speaker positions to nd the optimum setting

for you.

Follow these general guidelines for speakers placement.

1 Seating position:

This is the center of your listening area.

2 FRONT CENTER (front center) speaker :

Place the center speaker directly in front of the seating position, either above or below your TV.

3 FRONT LEFT (front left) and FRONT

RIGHT (front right) speakers:

Place the left and right speakers in the front, and at equal distance from the center speaker. Make sure that the left, right, and the center speakers are at equal distance from your seating position.

4 REAR LEFT (rear left) and REAR RIGHT

(rear right) speakers: Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it.

7EN

5 SUBWOOFER (subwoofer):

Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall.

Connect to TV

such as volume control for both the TV and the home theater. (see 'Set up EasyLink (HDMI-CEC control)' on page 10)

3 If you cannot hear the TV audio through

your home theater, set up the audio manually.

Connect your home theater to a TV to watch videos. You can listen to the TV audio through your home theater speakers. Use the best quality connection available on your home theater and TV.

Option 1: Connect to TV through HDMI (ARC)

Best quality video

Your home theater supports HDMI version with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your home theater by using a single HDMI cable.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC) connector on your home theater to the HDMI ARC connector on the TV.

• The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.

2 On your TV, turn on HDMI-CEC

operations. For details, see the TV user manual.

• HDMI-CEC is a feature that enables CEC compliant devices that are connected through HDMI to be controlled by a single remote control,

Option 2: Connect to TV through standard HDMI

Best quality video

If your TV is not HDMI ARC compliant, connect your home theater to the TV through a standard HDMI connection.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC) connector on your home theater to the HDMI connector on the TV.

2 Connect an audio cable to hear the TV

audio through your home theater (see 'Connect audio from TV and other devices' on page 9).

3 On your TV, turn on HDMI-CEC