Philips HR 8910-B Service Manual

2001-01-05

Service

Vacuum cleaner
HR 8910/B

Information

Domestic Appliances and Personal Care

Use Service Manual 4322 277 00270

In vacuum cleaners type HR 8910 version /A, the cordwinder with a round cord has been replaced with a
new cord winder with a fl at cord. As a result, the version indication has been changed to /B.

Replacement of a cord:
The cords have a standard length and, depending on the cord length required for the appliance, the cord
must be shortened.
If the cord comes without AMP clamps, it can be soldered onto the terminals.

If pos. 81 is replaced, shaft A must be lubricated with silicone grease (A). This grease may not be used on
terminals (85) or on conductors (84).

Spares:
23 brake tyre 4322 001 72360
81 reel half spring unit (l=9m) 4322 009 07940
84 reel half contact unit 4322 009 07950
85 contact ring plate 4322 009 07960
A silicon grease for the shaft 5322 390 20011
B screw 3.5 x 12 / T10 4322 002 82550

86 Argentina L= 9.3 m 4322 006 01440
Australia L= 9.3 m 4322 006 01760
87 Taiwan L= 6.3 m 4322 006 01680
88 U.K. / H.K. L= 9.3 m 4322 006 01720
89 Euro 4.8mm pins L= 9.3 m 4322 006 01410
90 Swiss L= 9.3 m 4322 006 01670
91 Italy L= 9.3 m 4322 006 01460

DAP287

81

23

Argentina
Australia

Taiwan

A

B

86

87

88U.K. / H.K.

Europe Ø 4.8mm 89

Swiss 90

Italy

91

84

85

B

4322 277 00451

DAP1422