![](/html/38/38d1/38d1be5988fa0abeb2f06ad4377ec5b7dffacc49120ccf3831d6febf6200f830/bg1.png)
2001-02-25
Service
Vacuum cleaner
HR 8570/D
Information
Domestic Appliances and Personal Care
Use Service Manual 4322 277 00439
In vacuum cleaners type HR 8570 version /B, the cordwinder with a round cord has been replaced with a
new cord winder with a fl at cord. As a result, the version indication has been changed to /D.
Replacement of a cord:
The cords have a standard length and, depending on the cord length required for the appliance, the cord
must be shortened.
If the cord comes without AMP clamps, it can be soldered onto the terminals.
If pos. 81 is replaced, shaft A must be lubricated with silicone grease (A). This grease may not be used on
terminals (85) or on conductors (84).
Spares:
23 brake tyre 4322 001 72360
81 reel half spring unit (l=9m) 4322 009 07940
84 reel half contact unit 4322 009 07950
85 contact ring plate 4322 009 07960
A silicon grease for the shaft 5322 390 20011
B screw 3.5 x 12 / T10 4322 002 82550
86 Argentina L= 9.3 m 4322 006 01440
Australia L= 9.3 m 4322 006 01760
87 Taiwan L= 6.3 m 4322 006 01680
88 U.K. / H.K. L= 9.3 m 4322 006 01720
89 Euro 4.8mm pins L= 9.3 m 4322 006 01410
90 Swiss L= 9.3 m 4322 006 01670
91 Italy L= 9.3 m 4322 006 01460
DAP311
81
23
Argentina
Australia
Taiwan
A
B
86
87
88U.K. / H.K.
Europe Ø 4.8mm 89
Swiss 90
Italy
91
84
85
B
4322 277 00507
DAP1422