Philips HR2840 Service Manual

Philips Domestic Appliances and Personal Care

Blender

HR 2840

1500

1000

750

500

HR 2841 HR 2842 HR 2843

PRODUCT INFORMATION HR2840 = Blender with jar

HR2841 = HR2845 with HR2924 HR2842 = HR2845 with HR2926 HR2843 = HR2845 with HR2924 and HR 2926

HR2924 = Mill see Service Manual 4822 729 21749 HR2926 = Chopper see Service Manual 4822 729 21481

Type no: HR2840/AM means first version and production centre is Mexico; HR2840/AB means first version and production centre is Brazil

Safety system : The blender operates only if the jar,

mill or chopper is correctly placed on the drive unit.

Safety cap : The cap locks the lid to the jar in order

to avoid spillage. Cord storage : it allows control of the cordset length. Switch : 3 speeds with pulse position. Power consumption : 400W Dimensions lxhxw : 18.5 x 38.5 x 17 cm Volume jar : Effective 1.5 and total 2.0 litre. Cleaning : Do not clean the parts in a dishwasher.

SERVICE INFORMATION Safety device.

The appliance can only be operated if the jar (item 23) is placed on teh body of the appliance so that the safety interrupter (item 10) located inside the appliance is activated by means of a shaft (item 9).

Knife assy.

To remove the knife assy (item 17) from the jug (item 23) turn the knife assy clockwise.

Disassembly of the appliance.

Loosen the two screws to be able to remove the base from the appliance. Then undo the 3 snap connections which fasten the base 2 snap connections in the front part and 1 snap connection in the rear part.

Remove the base.

Remove the cover (item 1) of the body (item 3) by undoing its snap tabs through the 4 openings near the jar coupling. Drive coupling (item 2) can now be loosened with the help of a hammer and a screwdriver. Hit the screwdriver with a short sharp blow of the hammer and remove the drive coupling clockwise. Disconnect the motor wires.

Inspection after repair.

Test the safety interrupter by mounting and dismounting the jar while the appliance is switched on. Make sure that the speed switch operates properly in all speed settings.

MSH coding 8832 840 00000 MSH coding 8832 841 00000 MSH coding 8832 842 00000 MSH coding 8832 843 00000

PublishedbyPhilipsDomesticAppliancesandPersonalCare PrintedintheNetherlands

4822 729 21874 97/09

PCS 88 835

Copyrightreserved Subjecttomodification

DAP 0415

+ 1 hidden pages