Beard Trimmer
HQ-T 368
Philips Domestic Appliances and Personal Care
PRODUCT INFORMATION
Features :
−Adjustable comb attachement to set the beard length
−9 positions, resulting beard length 1.5 - 18.0 mm
−Beard length indication window
−Zoom ring to set the comb to the requested position
−Pilot light, which will be on during charging
−Maintenance free cutting element: no oiling required
−Precision pop-up trimmer
Technical data : |
|
|
|
Power system |
: |
rechargeable |
|
Batteries |
: |
1 x AA NiMh or 1 x AA NiCd |
|
Charging period |
: |
NiMh batteries |
: 12 hours |
|
|
NiCd batteries |
: 10 hours |
Capacity |
: |
NiMh batteries |
60 minutes |
|
|
NiCd batteries |
40 minutes |
Product meets the requirements regarding interference suppression on radio and TV.
NOTES :
*The charging stand can also be used to store the trimmer
*In order to guarantee the longest possible working life of the battery :
−do not charge for more than 24 hours
−do not keep the charging unit permanently plugged in
−discharge the battery completely once a year by letting the motor run until it stops
*If the battery is empty and the consumer wants to trim his beard, the trimmer has to be charged for at least 1.5 hours to have enough power for one trim
*The appliance should be charged again, when not used for a long period
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
4822 729 21985 98/05
PCS 99 504
DISASSEMBLY ADVICE
to replace SPRING ON /
OFF SWITCH
(4)
7
to replace |
BATTERY (7) |
6 |
remove |
SCREW A |
|
|
A |
|
EXPLODED VIEW + PARTS LIST
2 1
A |
4 5 |
3 |
Pos |
Description |
Service code |
|
|
|
1 |
comb |
4822 690 10169 |
2 |
cutter |
4822 690 10174 |
3 |
cleaning brush |
4822 479 30183 |
4 |
spring on/off switch |
4822 492 71508 |
5 |
slide on/off switch |
4822 277 11808 |
6 |
battery NiMh |
4822 138 10551 |
|
battery NiCd |
4822 138 10336 |
7 |
adapter NiCd USA |
4822 219 10284 |
|
adapter NiCd CND |
4822 219 10285 |
|
adapter NiCd JPN |
4822 219 10286 |
|
adapter NiCd EURO |
4822 219 10311 |
|
adapter NiMh EURO |
4822 219 10312 |
|
adapter NiCd UK |
4822 219 10313 |
|
adapter NiCd Taiwan |
4822 219 10315 |
|
adapter NiCd Korea |
4822 219 10316 |
|
adapter NiCd Australia |
4822 219 10314 |
|
|
|
Before reassembling the battery holder, make sure that the internal wiring is guided as shown in figure 1.
After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and offically established at this moment.
Figure 1
PCS 99 504