Shaver
HQ444
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
-This product meets the requirements regarding interference suppression on radio and TV.
-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
- |
Operating Voltage |
: 4,5 Volt |
- |
Power supply |
: Mains |
- |
Shaving heads |
: 2 x HQ4+ |
- SAP coding |
: HQ444 |
DISASSEMBLYAND RE-ASSEMBLY ADVISE
Disassembly:
-Remove the shaving unit, to prevent damages during repairs
-Remove screw (1x)
-Remove cover
-Unlock the peg-clamping “Z” (4x) between frame (item 11) and hairchamber (item 8)
-Remove power supplier
-Remove the gear assy (2x)
-Remove pinion
-Remove screws (2x) for disconnecting motor from frame
-To remove the trimmer, first disassemble the trimmerslide by pushing down the locking pegs “V” (2x) and move slide slightly outwards
-Make room between trimmer and cover with a small screwdriver, to release the peg fastening “Y”
Assembly:
-The assembly must be carried out in the reverse order of what is discribed under disassembly
-When fitting the shaver it must be checked if wiring is correctly positioned
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- No specific issues
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
03/09
PARTS LIST & EXPLODEDVIEW
4
1
5
20
6
7
8
Z
9
10
2
Pos |
Service code |
Description |
|
|
|
|
|
|
|
1 |
4822 479 30183 |
cleaning brush |
|
|
2 |
4222 036 07650 |
housing |
|
|
3 |
|
|
|
|
4 |
4222 036 06990 |
protecting cap |
|
|
5 |
4222 036 07030 |
bracket |
|
|
6 |
4222 036 05450 |
shaving heads |
|
|
7 |
4222 036 07170 |
head holder assy |
|
|
8 |
4222 036 07470 |
hair chamber assy |
|
|
9 |
4222 036 07380 |
gear assy |
|
|
10 |
4222 036 07480 |
lever |
|
|
11 |
4222 036 07390 |
screw |
|
|
12 |
4222 036 07400 |
motor frame |
|
|
|
|
|
|
|
= changed
HQ444
15
V
Y
16
17
11
12 |
19 |
13
14
Pos |
Service code |
Description |
|
13 |
4222 036 07410 |
pinion |
|
14 |
4222 036 07660 |
motor assy |
|
15 |
4222 036 07490 |
trimmer assy |
|
16 |
4222 036 07670 |
cover |
|
17 |
4822 502 30526 |
screw |
|
18 |
|
|
|
19 |
4222 036 07680 |
power supply |
|
20 |
4822 321 10095 |
flex assy |
EUR |
|
4822 321 10096 |
flex assy |
GBR |
|
4222 036 01590 |
flex assy |
ARG |
|
4222 036 07700 |
pouch |
|
|
|
|
|