Philips **HFL5011T/12, **HFL7011T/12 Installation Manual

Get support at

http://www.philips.com/support/
http://philipshtv.supportsystem.com/

Installation Manual

xxHFL5011T/12
xxHFL7011T/12

Status: Approved version
Version: 2.1
Date: 15 March 2017
Author: Bert De Latter

- 1 -

Table of Contents

1. General information .................................................................................................................... - 4 -

1.1 Notice .................................................................................................................................. - 4 -

1.2 Help and support ................................................................................................................. - 4 -

1.3 Definitions, Acronyms and Abbreviations ........................................................................... - 5 -

1.4 How to navigate, open menu’s and make selections .......................................................... - 5 -

2. Requirements before starting the installation of a TV ................................................................ - 6 -

2.1 Remote control .................................................................................................................... - 6 -

2.1.1 Master remote control 22AV8573 or 22AV9573A ...................................................... - 6 -

2.1.2 Guest remote control 22AV1505B (IR) ........................................................................ - 6 -

2.1.3 Accessory remote controls .......................................................................................... - 7 -

2.1.4 How to pair a bluetooth remote control ..................................................................... - 7 -

2.1.5 How to setup the Healthcare RC ................................................................................. - 7 -

2.1.6 How to setup the Easy RC ............................................................................................ - 8 -

2.2 Professional Settings menu ................................................................................................. - 9 -

2.3 Software upgrade ................................................................................................................ - 9 -

2.4 Clone folder structure ....................................................................................................... - 10 -

3. Find out the state of the TV ....................................................................................................... - 11 -

3.1 Virgin mode ....................................................................................................................... - 11 -

3.2 Professional Settings ON/OFF ........................................................................................... - 11 -

3.2.1 Enable the Professional Settings ............................................................................... - 12 -

3.2.2 Disable the Professional Settings .............................................................................. - 12 -

4. Reinstall TV ................................................................................................................................ - 13 -

4.1 Reinstall via a script in the clone file ................................................................................. - 14 -

5. Virgin installation wizard ........................................................................................................... - 15 -

5.1 Instant Initial Cloning (IIC) ................................................................................................. - 15 -

5.1.1 Virgin installation ....................................................................................................... - 15 -

5.1.2 Instant initial cloning and software upgrade ............................................................. - 15 -

5.2 Settings during virgin installation ...................................................................................... - 17 -

6. Professional Settings ................................................................................................................. - 19 -

6.1 Store settings in the Professional Settings menu .............................................................. - 19 -

6.2 Overview ............................................................................................................................ - 19 -

6.3 Upgrade and Clone ............................................................................................................ - 20 -

6.4 Switch on settings .............................................................................................................. - 24 -

- 2 -

6.4.1 Channel Settings ........................................................................................................ - 24 -

6.4.2 Feature Settings ......................................................................................................... - 25 -

6.4.3 Sound Settings ........................................................................................................... - 26 -

6.4.4 Picture Settings .......................................................................................................... - 27 -

6.4.5 Subtitles ..................................................................................................................... - 28 -

6.4.6 Ambilight Settings ..................................................................................................... - 28 -

6.4.7 Region And Language Settings .................................................................................. - 29 -

6.4.8 ECO Settings .............................................................................................................. - 30 -

6.4.9 Content Rating ........................................................................................................... - 30 -

6.5 Dashboard ......................................................................................................................... - 31 -

6.6 Features ............................................................................................................................. - 32 -

6.7 Channels ............................................................................................................................ - 38 -

6.8 Sources .............................................................................................................................. - 40 -

6.9 Date and Time ................................................................................................................... - 42 -

6.10 Wireless and Networks ...................................................................................................... - 45 -

6.10.1 Network wizard ......................................................................................................... - 45 -

6.10.2 Network settings ....................................................................................................... - 45 -

6.10.3 Network Features ...................................................................................................... - 47 -

6.10.4 Network Control TV Over IP ...................................................................................... - 49 -

6.11 Advanced ........................................................................................................................... - 51 -

6.12 Picture ............................................................................................................................... - 56 -

6.13 Sound ................................................................................................................................. - 58 -

6.14 Ambilight ........................................................................................................................... - 61 -

6.15 Region and Language ........................................................................................................ - 62 -

6.16 Accessibility ....................................................................................................................... - 62 -

6.17 Android Settings ................................................................................................................ - 63 -

6.18 Reset .................................................................................................................................. - 65 -

7. Channel installation wizard ....................................................................................................... - 66 -

8. Network installation wizard ...................................................................................................... - 68 -

9. Manage ThemeTV ..................................................................................................................... - 70 -

10. Manage Channels .................................................................................................................. - 72 -

10.1 Rename channels .............................................................................................................. - 72 -

10.2 Hide/Show channels .......................................................................................................... - 73 -

10.3 Reorder channels ............................................................................................................... - 73 -

- 3 -

10.4 Blank/Non-blank channels ................................................................................................ - 74 -

11. Manage Apps ......................................................................................................................... - 75 -

12. Manage MyChoice ................................................................................................................. - 76 -

12.1 How does it work ............................................................................................................... - 76 -

12.2 How to configure MyChoice .............................................................................................. - 76 -

13. Guest Menu ........................................................................................................................... - 78 -

13.1 Home menu / Default dashboard ..................................................................................... - 78 -

13.2 Settings menu .................................................................................................................... - 78 -

13.3 Alarm ................................................................................................................................. - 79 -

14. SmartInfo ............................................................................................................................... - 80 -

14.1 SmartInfo Show ................................................................................................................. - 80 -

14.2 SmartInfo show information in the dashboard ................................................................. - 80 -

14.3 SmartInfo Browser............................................................................................................. - 82 -

15. CSM (Customer Service Menu) ............................................................................................. - 83 -

16. Examples ................................................................................................................................ - 84 -

16.1 ChannelList.xml in the clone file ........................................................................................ - 84 -

16.1.1 Add an RF channel in the ChannelList.xml ................................................................ - 85 -

16.1.2 Add a media channel in the ChannelList.xml ............................................................ - 86 -

16.2 RoomSpecificSettings in the clone file .............................................................................. - 87 -

16.3 LocalCustomDashboard in the clone file ........................................................................... - 88 -

16.4 Add a local app in the app list ........................................................................................... - 89 -

16.4.1 How to install your own apk if no other apps are installed yet ................................ - 89 -

16.4.2 How to install your own apk if already other apps are installed ............................... - 90 -

17. IP TV installation .................................................................................................................... - 91 -

17.1 Setup .................................................................................................................................. - 91 -

17.2 Settings for installing IPTV ................................................................................................. - 91 -

17.3 Installing IP Channels ......................................................................................................... - 92 -

17.4 Installing IP Channels without a CMND server .................................................................. - 92 -

- 4 -

1. General information

In this document you can find information on how to install the Philips hospitality TV’s from the
xxHFL5011 and xxHFL7011 range. This document is intended for the System Integrator or the technical
responsible of the hotel. You will find descriptions on what functions are there and how to use them.
In this chapter you can find back some general information that is useful to know before reading the
rest of the document.

1.1 Notice

2017 © TP Vision Belgium NV All rights reserved. Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics NV or their respective owners. TP Vision
Belgium NV reserves the right to change products at any time without being obliged to adjust earlier
supplies accordingly.

TP Vision Belgium NV cannot be held responsible neither for any errors in the content of this document
nor for any problems as a result of the content in this document. Errors reported to Philips will be
adapted and published on the Philips support website as soon as possible.

1.2 Help and support

Visit the Philips support website at http://www.philips.com/support/ for:

 Leaflet and product documentation
 Download a printable PDF version of the user manual
 Contact details of the helpdesk
 Download the last available software

Visit the Philips support ticketing system at https://philipshtv.supportsystem.com/ for:

 Allowing you to enter any after sales issue for which you need support
 Easily follow up on any tickets submitted
 A knowledge base that will enable you to find answers to questions we receive on regular basis

(FAQs)

 An NDA section for specific questions that require an NDA to be in place with your company

to get the detailed feedback

Visit the CMND website to find all info about CMND https://cmnd.io/

- 5 -

1.3 Definitions, Acronyms and Abbreviations

[ ]: The values between brackets are referring to a TV menu item or a button on screen
“ “: The values between quotation marks are referring to a remote button
BT: Bluetooth
DVB-T: Digital Video Broadcasting - Terrestrial
DVB-C: Digital Video Broadcasting - Cable
HTTP: Hyper Text Transfer Protocol
HTV: Hotel Television
IR: Infrared
JAPIT: JSON API for TV is the API specification to control the Philips TV
LCN: Logical Channel Number
MB: Megabyte
MHz: Megahertz
OSD: On Screen Display
PTA: Philips TV Application
RC: Remote Control
SI: System Integrator
STBY: Standby
SW: Software
TV: Television

WIxP: Web Internet eXPress

1.4 How to navigate, open menu’s and make selections

 Navigating in the menu can be done with the “up”, “down”, “left” and “right” arrow buttons

on the remote control

 Opening a menu can be done with the “OK” button
 The “OK” button can also be used to activate buttons that can be seen on the screen like

[Done], [Cancel], [Close], [Yes], [No], …

 In many places in the menu you need to press the “OK” button after you selected an item to

confirm your selection. Navigating to this menu item and go back to the menu will not store
your selection

 Changing the value of a slider can be done using the “up” and “down” arrow, your selection

will be remembered without pressing the “OK” button

- 6 -

2. Requirements before starting the installation of a TV

Before starting the installation, make sure that you have everything you need at hand.
You need a USB device and a remote control.

2.1 Remote control

2.1.1 Master remote control 22AV8573 or 22AV9573A

2.1.2 Guest remote control 22AV1505B (IR)

- 7 -

2.1.3 Accessory remote controls

22AV1604A

Healthcare RC

22AV1601A

Easy RC

22AV1507A

Bluetooth RC

2.1.4 How to pair a bluetooth remote control

There are two ways to pair the bluetooth remote control with the TV:

 Via the professional menu: [Professional settings] [Advanced] [Input Control] [Bluetooth

Remote Control] [Pair]

 You can manually put the TV in pairing mode:

o Press 5 seconds on the local keyboard on the backside of the TV
o You will see following OSD appear on TV

o Press the “Red” and “Blue” key on the bluetooth remote control simultaneously
o You will see following OSD appear on TV

o Your RC is now paired with the TV

2.1.5 How to setup the Healthcare RC

The RC can be used in both RC5 and RC6 mode, meaning that it can be used for all TV’s. By default the
RC is in RC6 mode (for 301x/501x/701x TV’s). You can change the RC to RC5 mode (for 28x9 TV’s).

 You can change the RC to RC5 mode by pressing 5 seconds “Home” and “Volume up” at the

same time.

 You can change it back to RC6 mode by pressing 5 seconds “Mute” and ”Channel up” at the

same time.

- 8 -

You can also use this RC for multi RC. More details can be found in the ‘Professional settings’ chapter.
You can program this RC in the same way as the guest RC.

2.1.6 How to setup the Easy RC

The RC can be used in both RC5 and RC6 mode, meaning that it can be used for all TV’s. By default the
RC is in RC6 mode (for 301x/501x/701x TV’s). You can change the RC to RC5 mode (for 28x9 TV’s).

 You can change the RC to RC5 mode by pressing 5 seconds “Home” and “Volume up” at the

same time.

 You can change it back to RC6 mode by pressing 5 seconds “Mute” and ”Channel up” at the

same time.

You can also use this RC for multi RC. More details can be found in the ‘Professional settings’ chapter.
You can program this RC by pressing 2 buttons at the same time for 5 seconds.

Below you can find a table how to match the TV settings and the settings as they can be used in the
guest RC for RC6:

Mod

e: Buttons combination:

Blue (default)

“Home

” and “

Volume

d

own”

Yellow

“Home

” and “

Channel down

” Red “

Back

” and “

Volume down

” Green

“Back

” and “

Channel down

” 0 “

Home

” and “

Clock

” 1 “

Home

” and “

Subtitle

” 2 “

Home

” and “

Arrow up

” 3 “

Home

” and “

TV” 4 “Home

” and “

Arrow left

” 5 “

Home

” and “

OK” 6 “Home

” and “

Arrow right

” 7 “

Home

” and “

Back

” 8 “

Home

” and “

Arrow down

” 9 “

Home

” and “

Mute

”

Below you can find a table how to match the TV settings and the settings as they can be used in the
guest RC for RC5:

Mode:

Buttons combination:

Blue (default)

“Home

” and “

Volume

d

own”

Yellow

“Home

” and “

Channel down

” Red “

Back

” and “

Volume down

” Green

“Back

” and “

Channel down

”

Also note that this multi RC setting is stored permanently, so it will remember the setting even if the
batteries are removed from the RC.

- 9 -

2.2 Professional Settings menu

To access the [Professional Settings] menu you have 2 possibilities:

 Using the master remote control, press the “RC 6 SETUP” key and then press the

“Home/Menu” button

 Using the guest remote control, press the following keys sequentially: “3,1,9,7,5,3,MUTE”

Note: The sequence: “3,1,9,7,5,3,MUTE” will not show the [Professional Settings] if [High Security]
option is enabled, it will only work using the ‘master RC’

2.3 Software upgrade

For the best guest experience it is highly recommended to use the latest software version available.
Go to: http://www.philips.com/support/

 Select your country, enter the model number and download the latest software version

available

 Unzip the software and follow the instructions how to upgrade the software on the TV
 The USB flash drive used for software upgrade must be formatted as FAT32 and preferably

empty to avoid an accidental upload of a wrong setting or software

 It’s recommended to first upgrade the TV and afterwards to perform the installation

The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action:
software upgrade and cloning during the instant initial cloning. See chapter ‘Instant Initial Cloning (IIC)’
for more information.

- 10 -

2.4 Clone folder structure

Below you can find the menu structure of a clone file. The content of this will be the same between
xxHFL5011 and xxHFL7011 except the folder name in the root of the USB device.
This also means that you can clone the data from xxHFL5011 in xxHFL7011 and vice versa by renaming
folder name in the root of the USB device. The big difference is that the xxHFL7011 has more memory
available and it has ambilight. Settings of the Ambilight cannot be cloned from one to the other.

Following are the folder names used in the root of the USB device containing the clone data:

 For xxHFL5011: TPM1532HE_CloneData/MasterCloneData/
 For xxHFL7011: TPM1531HE_CloneData/MasterCloneData/

In the folder ‘TPM153xHE_CloneData’, there can be multiple folders (so not only ‘MasterCloneData’):

 The MasterCloneData is the main master clone file containing all clone data.
 The 00001CloneData – 00007CloneData in this example are multiple clone files that can have

different content. This can be used for using 1 USB device with multiple clone files. In the menu
you can select what clone file should be used to load in a TV or via the RoomID this can be
done automatically. More info can be found in the ‘Professional Settings’ chapter.

 The DataDump contains information for debugging in case of reported problems. It also

contains the CSM.txt file containing all details about the TV. This is only written from TV to
USB.

It’s advised to use CMND to make changes to the MasterCloneData and not to do this manually.
Just for your information, the menu structure inside the MasterCloneData folder is as follows (some of
the folders might not be seen depending on your settings):

If you want to clone some specific part in your TV you can do so by only putting the specific folder in
the MasterCloneData folder before cloning it in the TV.
Note: The folder names are case sensitive

- 11 -

3. Find out the state of the TV

It is important to know if a TV is in Virgin mode (out of the box) or installed before.

3.1 Virgin mode

If you can see below screen, you know that the TV is in ‘out of the box’ state and you can install the
set by using procedure described in chapter ‘Virgin installation wizard’ of this manual.

3.2 Professional Settings ON/OFF

If your set is not in virgin mode you can check if the professional settings are ON or OFF. This can be
done by pressing the “settings” button. You will see below menu.

Go to [All Settings] and open this menu item. See below screenshots to know if professional settings
are ON or OFF.

- 12 -

Professional settings ON:

Professional settings OFF:

3.2.1 Enable the Professional Settings

Open the [Professional Settings] menu.

 Go to [Advanced], select [Professional Mode] and select [On]. Confirm with “OK”

 Press “Back” until you exit the [Professional settings] menu
 You will see a notification that the TV needs to restart to apply some settings

 Reboot the TV, after the reboot your TV will again be in Professional Mode

3.2.2 Disable the Professional Settings

Open the [Professional Settings] menu.

 Go to [Advanced], select [Professional Mode] and select [Off]. Confirm with “OK”

 Press “Back” until you exit the [Professional settings] menu
 You will see a notification that the TV needs to restart to apply some settings

 Reboot the TV, after the reboot your TV will no longer be in Professional Mode

Note: Issues reported with Professional Mode off will not be supported

- 13 -

4. Reinstall TV

If you want to start an installation from scratch you can always reinstall the TV. All settings will be reset
to the default values and no channels will be installed.

Open the [Professional Settings] menu.
Navigate to the [Reset] menu. Navigate to the [Reinstall TV] menu.

Press the “OK” button on the [Reinstall TV] menu, you should get below screen.

Select [Yes] using the “arrow” buttons. Press the “OK” button to reinstall the TV.

 Depending on your country selection you might need to enter the PIN code set in the TV
 The TV will show a waiting animation
 The TV will reboot and you will see the Philips logo
 The red RC led will be blinking
 You will see an indication “erasing…” with the Android robot (this can take several minutes)
 Philips logo will be shown again
 You will see 4 dot’s in blue, yellow, red and green circling around (this can take several minutes)
 You will see an Android logo
 You will be on the first screen of the virgin installation

- 14 -

4.1 Reinstall via a script in the clone file

To automatically reinstall the TV, load a new clone file and load new SW you can use this script.
In the ‘MasterCloneData’ folder you can add a folder called ‘Script’. In this folder you have to put a
script called ‘Script.xml’.
This xml file has as content below:

<?xml version='1.0' encoding='UTF-8' ?>

<Script>

<SchemaVersion MajorVerNo="1" MinorVerNo="0" />
<Activity>
<Action>ReinstallTV</Action>
</Activity>

</Script>

If you have this file in the correct location and you Clone USB to TV then in the beginning of the cloning
process the TV will give a notification ‘Reinstall TV’ and the TV will be reinstalled.
After the reinstallation the TV will be in IIC mode, if you have new SW on the USB device then the SW
will be upgraded, after this the new clone file will be loaded in TV.

- 15 -

5. Virgin installation wizard

When you have a new TV it will, out of the box, be in virgin mode. This means that you will have to go
through the virgin installation wizard to do the first settings of the TV.

5.1 Instant Initial Cloning (IIC)

5.1.1 Virgin installation

When starting up the TV in virgin mode you see the first screen indicating Instant Initial Cloning (IIC).
The TV is now searching on USB/Network and RF for a new clone file containing all new settings for
the TV and/or a new software update.
You can also see the model name and SW version of the TV.
If there is no need to load a clone file on this TV (for example if you want to make a new installation to
create a master clone file) then you need to press “OK” to activate the skip button.

5.1.2 Instant initial cloning and software upgrade

If you want to upgrade the TV software and load a new clone file in the TV via USB you have to do
following steps:

 Disconnect the TV in virgin mode from the mains power
 Insert a USB device with both the new SW (See chapter “Software upgrade”) and the clone file

you want to load in the TV

 Connect the mains power to the TV
 The TV will automatically detect the new SW version and the clone file and upgrade both the

SW and the clone file
You will see following 2 files in the root of your USB device (remove all other files and folders)
Note the case sensitivity for both the folder name and the upg file

- 16 -

or

Note: If multiple clone files are on a USB device, the “MasterCloneData” will be used for cloning

 During this process you will see following:

o Detection of the Software and Clone file

o SW upgrade will start

o After the downloading phase you will see that the SW upgrade will start. During this

process you will see that android is installing the system update and some other
waiting animations.
The SW upgrade can take several minutes.

o After the upgrade the TV will reboot and you will go again to the IIC screen where the

USB stick with clone file will be detected.

- 17 -

o The Cloning upgrade from USB will start and you can see the progress until successful

o If you don’t press “OK”, the TV will go to standby after 30 minutes. You can press “OK”

to close the overview screen, the installation is done and you can start using the TV.

If a clone file and/or software is sent out over IP or RF the same process will happen automatically.

5.2 Settings during virgin installation

When you skip the IIC screen you will have to set several settings:



Select your Language for the TV menu



Select your Country for the TV installation

- 18 -



Select your Default Picture Style

 It is recommended to select [Natural]

instead of [Standard] for a better
brightness



Enable Professional mode, only when this

is enabled your TV can be used as a
hospitality TV



Enter a Room ID or leave it to 00000

 Setting a Room ID gives you following

advantages:
o It’s easy to recognize the TV’s using the

Room ID in CMND, else you only have
the serial numbers

o You can put multiple clone files on one

USB device, they will automatically be
selected when loading a new clone in
the TV based on the Room ID

o When cloning over RF you can send a

clone file to a range of Room ID’s



The virgin installation is finished

- 19 -

6. Professional Settings

In this chapter you can find back more information about all professional settings that can be changed.
To start you have to open the [Professional Settings] menu.

6.1 Store settings in the Professional Settings menu

Several settings will be applied immediately once you change the settings without a reboot. For some
settings a reboot is still required. If you don’t see the message, a reboot is not required.

 Change some settings according to what you need to change
 Press “Back” until you exit the [Professional settings] menu
 You can see a notification that the TV needs to restart to apply some settings

 Reboot the TV by unplugging from the mains power and plugging the TV again. After the reboot

your new settings will be applied

6.2 Overview



Navigate to the [Overview] menu

 Open this menu item



You will get an overview screen with all

the settings that are set in the TV, this
overview can be used to see the settings
without having to navigate to all menu’s
separately

 Using the “arrow up/down” buttons you

can go to the other overview pages (there
are 7 in total)

Note: No value can be changed in these
screens

- 20 -

6.3 Upgrade and Clone



Navigate to the [Upgrade and Clone] menu

and open it

 You will see the screen on the left

Note: Cloning and upgrading over IP or RF
will happen automatically after the TV is in
standby for 5 minutes when [Auto Upgrade
and Clone] in the professional menu is set to
[On]



Select the [Current Firmware and Clone

info] menu and open it

 You can see the SW version and the dates

when the last cloning action was done

 Select [Next] and press “OK” to see the

second page

 Select [Previous] and press “OK” to see the

first page

 Select [Close] and press “OK” to go back to

the previous page



Select the [Clone USB to TV] menu and

open it

 Using this you will be able to clone from the

USB device to the TV

 On the top of the page you will see a

waiting animation while cloning is ongoing,
once finished it will change to Successful

 During the cloning process there will be a

[Cancel] button available on the bottom of
the page, press “OK” to cancel the cloning
process

 Press “OK” to close the page once the

[Cancel] is changed to [Close] and go back
to the previous menu

 If no USB stick is inserted you will see on top

of the page USB not found

- 21 -



Select the [Clone TV to USB] menu and

open it

 Using this you will be able to clone from the

TV to the USB device

 There are 2 submenus [Clone All except

Apps] and [Clone All]

 When opening these menu’s you will have

the same screen as shown when selecting
the [Clone USB to TV] menu

 [Clone All except Apps] menu will clone

everything except the Apps

 [Clone All] menu will clone everything

including the Apps



Select the [Firmware Upgrade from USB]

menu and open it to go to the Software
Update Wizard

 Using this you will be able to load new SW

in the TV, you will get an autorun.upg that
is automatically detected when this file is in
the root of your USB device. This way of
programming is for advanced users

 You will see a list of SW version that is

available in the ‘upgrades’ folder in the root
of the USB device connected to the TV

 Select the SW you want to install and press

“OK”, the highlight will go to [Next]

 Press “OK” to start to program the software
 You will see that the SW is being

downloaded to the TV

 Once this is done you have to press “OK” to

[Start]

 The programming of the SW will start, your

TV might reboot during this process that
can take several minutes. You can remove
your USB device during the programming as
the SW is loaded in the TV memory

- 22 -



Select the [Clone IP to TV] menu and open

it

 Using this you will be able to clone to the TV

over IP, this happens automatically when a
clone has been assigned to the TV in CMND.
Via this menu you can manually force an
upgrade to happen

 On the top of the page you will see a

waiting animation while cloning is ongoing,
once finished it will change to Done

 During the cloning process there will be a

[Cancel] button available, press “OK” to
cancel the cloning process

 Press “OK” to close the page once the

[Cancel] is changed to [Close] and go back
to the previous menu

Note: This menu is only accessible when
[On] is selected in the [Wireless and
Networks] [Control TV Over IP]
[WebServices] [IPUpgradeService] menu



Select the [Clone RF to TV] menu and open

it

 Using this you will be able to clone to the TV

over RF, this happens automatically when a
clone is being played out on RF by CMND.
Via this menu you can manually force an
upgrade to happen

 On the top of the page you will see a

waiting animation while cloning is ongoing,
once finished it will change to Done

 During the cloning process there will be a

[Cancel] button available, press “OK” to
cancel the cloning process

 Press “OK” to close the page once the

[Cancel] is changed to [Close] and go back
to the previous menu

- 23 -



Navigate to the [USB Cloning Settings] [USB

Source Clone Folder] menu

 When a USB device is connected you can

see multiple clone files if they are available

 You can select a clone and confirm via “OK”,

now you can do the upgrade of the selected
clone file via [Clone USB to TV]

 By default the clone data is taken from

/TPM1532HE_CloneData/MasterCloneData
/ for xxHFL5011 or for xxHFL7011
/TPM1531HE_CloneData/MasterCloneData
/

 You can also add extra clone files by copy

and rename the “MasterCloneData” using 5
digits for XXXXX in “XXXXXCloneData” in the
folder name, this gives you the possibility of
having multiple clone files on one USB
device, see below an example of the folder
structure (See chapter Clone folder
structure for more info)

Note: When room ID is set and this matches
the 5 digits, then by default this Clone file
will be selected



Navigate to the [Auto Upgrade Settings]

menu and open it

 You will see below items:

o [Auto Upgrade and Clone]: RF upgrade

and Clone upgrade will be enabled
automatically at 4 AM and 1 PM if the TV
is in standby if [On] is selected, no
upgrade will happen when [Off] is
selected

o [Auto Clone on Wakeup]: Nothing will

happen when [Off] but when [On] the
TV shall search for a new clone when
waking up from standby

Note: Only TVSettings, ChannelList,
WeatherForecast, SmartInfoShow,
SmartInfoBrowser and PMS data will be
cloned on wakeup

- 24 -



Navigate to the [RF Upgrade Settings]

menu and open it

 You will see below items:

o [Frequency]: The frequency for CMND

playout can be modified in this menu

Note: Default this should be set to 498
MHz. If for some reason you need to
change this frequency, it’s
recommended to use a frequency
between 474 MHz and 858 MHz in steps
of 8MHz (DVBT-range).

When an RF upgrade happens, the TV
will first do a scan on the frequency set
here. If nothing is found it will scan
between 474 MHz and 858 MHz in steps
of 8MHz. So if you do a playout on
another frequency as set in the TV, the
TV will still find it.

6.4 Switch on settings



Navigate to the [Switch On Settings] menu

and open it

 You will see the screen on the left
 In this menu you will be able to set all

Switch on settings, these are the menu
items that a guest can change, the values
you set here are the settings applied when
the guest wakes up the TV

6.4.1 Channel Settings



Navigate to the [Channel Settings] [Switch

On Channel Filter] menu and open it

 You will see a list of channel filters, your

selection will be the default selected
channel filter when opening the channel
list

 This list also contains the theme’s

Note: The list you see in the screenshot is
depending on the installed content

- 25 -



Navigate to the [Channel Settings] [Switch

On Channel] menu and open it

 You will see a list of channels followed by

the external sources

Note: The list you see in the screenshot is
depending on the installed channels

 Select the channel or source you would

like to set as Switch On Channel



Navigate to the [Channel Settings]

[Channel Details]

 This menu can only be used when using

JAPIT or SXP

6.4.2 Feature Settings



Navigate to the [Feature Settings] [Switch

On Feature] menu and open it

 You will see below items:

o [None]: The dashboard or apps will

NOT be opened when starting up the
TV

o [Dashboard]: The dashboard will be

opened when starting up the TV

o [SmartInfo]: SmartInfo will be opened

when starting up the TV

o [Apps]: An app will be opened when

starting up the TV

o [MyChoice]: MyChoice PIN code screen

will be shown when starting up the TV

Note: SmartInfo and MyChoice will only be
visible in this list when they are enabled in
[Features] menu

- 26 -



Navigate to the [Feature Settings] [Apps]

menu and open it

 You will see a list of the installed apps and

you can select an app you want to show as
switch on application

Note: This menu is only accessible when
[Apps] is selected in the [Switch On
Feature] menu. The content of [Apps]
depends on the installed apps

6.4.3 Sound Settings



Navigate to the [Sound Settings] [Volume]

menu and open it

 You will see below items:

o [TV Speakers]: Change the default

volume setting for the TV speakers

o [Headphone/Bathroom speakers]:

Change the default volume setting for
the headphone and bathroom
speakers

o [Bluetooth]: Change the default

volume setting for the bluetooth
speakers

 Open these menu items and change the

default volume using the “arrow
up/down” in the volume slider, changes
are stored directly



Navigate to the [Sound Settings] [Sound

Style] menu

 You will see following options in this menu

(Personal, Original, Movie, Music, Game
and News)

 Switching between the preset sound styles

will change the sound style depending on
your selection)

- 27 -



Navigate to the [Sound Settings] [Bass]

menu

 Change the low tones by changing the

slider value

 When changing the value you should

directly hear the changes (if audio is
playing in the background)



Navigate to the [Sound Settings] [Treble]

menu

 Change the high tones by changing the

slider value

 When changing the value you should

directly hear the changes (if audio is
playing in the background)

6.4.4 Picture Settings



Navigate to the [Picture Settings] [Picture

Format] menu

 Change the default Picture Format to your

preference and press “OK” to store the
value



Navigate to the [Picture Settings] [Picture

Format] menu and open it

 Change the default Picture Style to your

preference, the values of [Colour],
[Contrast] and [Sharpness] will change
accordingly

- 28 -



Navigate to the [Picture Settings] [Colour]

menu and open it

 Navigate to the [Picture Settings]

[Contrast] menu and open it

 Navigate to the [Picture Settings]

[Sharpness] menu and open it

 Using a sliders in these menus you will be

able to change the value

6.4.5 Subtitles



Navigate to the [Subtitles] menu

 You will see below items:

o [Off]: Change the default subtitles

setting to Off

o [On]: Change the default subtitles

setting to On

o [Automatic]: Change the default

subtitles setting to Automatic, this
means that the subtitles will be shown
if the TV is muted and if subtitles are
available

6.4.6 Ambilight Settings



Navigate to the [Ambilight Settings]

[Ambilight Style] menu

Note: This menu is only available on
xxHFL7011 TV’s

 You will see below items:

o [Off]: You can put the Ambilight Off
o [Follow Video]: The ambilight will

change based on the dynamics of the
video. You can select the mode inside
this menu as you prefer

o

[

Follow Audio

]: The ambilight will

change based on the dynamics of the
audio. You can select the mode inside
this menu as you prefer