Philips HB 545-A, HB 546-A Service Manual

Combi Solarium

HB 545/A

Service

HB 546/A

Service

Service

Service
Information

!

Service Manual 4822 729 21764 and

Philips Domestic Appliances and Personal Care

DAP 215 are herewith cancelled.

Service Manual

30uF

C
L

M M

PRODUCT INFORMATION

Input power HB 545 : approx. 2140W
UVA lamps HB 545 HB 546 : 20x TL100W/Cleo

HB 546 : 4x TL 15W/Cleo
Starter HB 545 HB 546 : 20x S12

Ballast HB 545 HB 546 : 20x 100W
Timer HB 545 HB 546 : 60 mins Eaton

Radiation area HB 545 HB 546 : 171 x 60 cm
Radiation distance HB 545 HB 546 : fixed
Height adjustment HB 545 HB 546 : 8 cm
Output UVX36meter Couch : >4.6 mW/cm

Protecting goggles : HB071

S

La

3X 7X

La

Canopy : >4.6 mW/cm at 20 cm

L

S

HB 546 : approx. 2295W

HB 546 : 4x S2
HB 546 : 2x 30W

2
2

L

M

HINTS FOR REPAIRS

- By interchanging it can be found out whether starters,
lamps or ballasts are defective.
If they are not, the internal wiring is to be checked,
especially that on the tube holders.

- The snap-on connections of the wiring can be unlocked
with a paper clip.

- The quick blackening of a tube-end points to a defective

starter or a wiring fault.

Disassembly

Repairs can be done with help of a second person only.
Lift sun couch from its legs - see to it that the upper part will
not tumble.
Remove end covers.
Remove top cover and acrylic plate.
For removal of ballast or fan the pop rivets must be drilled out.
New parts have to be fixed with pop rivets 4.8 mm or blind­rivetting nuts M3 (no service items).

S

La

10X 2X HB 546

L

S S

M

The gas spring can be removed by pulling the solarium in
highest position.
For disassembly of the hinges the ornamental prop, spring
clip and plastic ring have to be removed.
Polish the shaft with abrasive paper to make the removal of
guide block easier.

SAP coding
8843 545 99999
8843 546 99999

Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification

On assembly see to it that the cams of the spring clip rest
in the groove on the shaft.

©

4322 277 00367
00/08

HB 545/A
HB 546/A

4/5321

6
7

8
9

10

15 16

FOR NOT INDICATED PARTS SEE LIST BELOW

4822 441 11965 cover

1

4822 466 11495 acrylic plate

2

4822 466 12148 side panel with grip

3

4822 410 11079 timer knob

4

4822 349 40068 timer 60mins

5

4822 442 00871 end cover

6

9965 000 02280 hand grip

7

4822 134 30014 TL 100W/UVA/Cleo

8

4822 529 10383 gas spring

9

9965 000 06404 side panel

10

9965 000 06403 side panel

16

4822 255 10254 lampholder

­4822 146 10344 ballast 230V/100W

­4822 255 10255 lamp/starterholder

­4822 219 80258 S12 starter

­4822 361 10966 fan 230V

­4822 690 80123 HB071 protecting goggles

­4822 520 10789 bearing block (1 set)

­4822 134 30026 TL 15W/UVA/Cleo (HB546)

­5322 219 80597 S2 starter (HB546)

-

11
12/13
14

4822 466 11496 acrylic plate

11

4822 320 11885 connecting cable

12

4822 265 10935 4-pole socket

13

4822 441 11964 cover

14

9965 000 06402 side panel

15

4822 255 10182 lampholder 15W (HB546)

­4822 255 10153 starterholder 15W (HB546)

­4822 142 60359 ballast 230V/30W (HB546)

-