Philips HB 542-A, HB 541-A Service Manual
Service
Service
Service
UV-A Solarium
HB 541/A
HB 542/A
Domestic Appliances and Personal Care
Service Manual 4822 729 21606 is
herewith cancelled.
Service Manual
SAP coding 8843 541 99999
PRODUCT INFORMATION
HB541
HB542
Input power HB 541
HB 542
Starter
Ballast
Timer
Radiation area
Radiation distance
Height adjustment
Protecting goggles
Output UVX36 meter
HINTS FOR REPAIRS
-
By interchanging it can be found out whether starters,
lamps or ballasts are defective.
If they are not, the internal wiring is to be checked,
especially that on the tube holders.
-
The snap-on connections of the wiring can be
unlocked with a paper clip.
-
The quick blackening of a tube-end points to a
defective starter or a wiring fault.
-
Disassembly of radiation part
Remove end cover (item 10).
Remove cover (item 9) and acrylic plate (item 11).
For removal of ballast or fan the pop rivets must
be drilled out.
New parts have to be fixed with pop rivets 4.8 mm
or blind-rivetting nuts M3 (no service items).
:
8 x TL100W/Cleo
:
10 x TL100W/Cleo
:
approx. 920W
:
approx. 1150W
:
S12
:
100W/230V
:
60 mins Eaton
:
174 x 56 cm
:
20 cm
:
between 66-96 cm
:
HB072 - 4822 690 80147
:
HB541 >3.8 mW/cm at 20 cm
:
HB542 >4.6 mW/cm at 20 cm
2
2
S
a
M
a1 b1
Disassembly of gasspring (item 15)
Put solarium in highest position.
Fasten ornamental screw (item 16)
Now turn the stand and the radiation unit through
so far that the legs of the stand and the radiation
unit rest on the floor.
Remove the nut inside the stand tube.
Remove the ornamental screw and unlock the
plastic guide block.
Separate the inner and outer stand part.
Remove the ornamental prop and the spring clip
at the inner side of the stand and lift the pin out.
The gasspring can be taken out now.
Note: a new gasspring comes with plastic guide
block, spring clip and ornamental prop.
Disassembly of hinge (item 13)
Remove the ornamental prop, spring clip and
plastic ring.
Polish the shaft with abrasive paper to make the
removal of guide blocks easier.
On assembly see to it that the cams of the spring
clip rest in the groove on the shaft.
La
SAP coding 8843 542 99999
HB 541 8x
HB 542 10x
L
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification
©
4322 277 00365
00/08
HB 541/A
HB 542/A
1
2
3
4
8
9
10
11
12
5
6
7
1
4822 410 11079
2
4822 255 10255
3
4822 219 80258
4
4822 361 10747
5
4822 255 10254
timer knob
lamp/starter holder
S12 starter
fan 230V
lamp holder
11
4822 466 10705
12
4822 146 10344
13
4822 520 10789
14
9965 000 02280
15
4822 529 10329
13
14
15
16
17+15
18
19
20
acrylic plate
ballast 230V
bearing set
handgrip
gasspring
6
9965 000 06405 side panel
7
4822 134 30014
8
4822 349 40068
9
4822 442 00005
10
4822 442 00006
TL 100W/Cleo
timer 60 mins
cover
end cover
16
4822 502 13999
17
9965 000 02732
18
9965 000 01865
19
4822 462 11193
20
4822 528 10924
-
4822 690 80147
orn. screw
stand with gasspring
side panel with grip
U-shaped foot
swivel wheel
HB072 prot. goggles
Loading...