Steam iron
Azur
Steam 50g/min;200g steam
boost
SteamGlide Plus soleplate
Safety Auto Off
2600 Watts
GC4860/27
Designed for perfection
Iron with powerful steam performance
This new Philips Azur iron comes with an optimal design and weight to maneuver the iron easily over the
garment, even into the hard to reach areas. Together with its powerful steam performance it gives you all you
need for perfect results.
Easily removes creases
Steam output of up to 50 g/min for better crease removal
2600 W for quick heat up and powerful performance
200 g steam boost for the most stubborn creases
Easy gliding on all fabrics
SteamGlide Plus: perfect mix between gliding and stretching
Safe ironing
Iron switches off automatically when left unattended
Designed for perfect results
Optimal design to manoeuvre the iron easi ly over the garment
Lightweight to move the iron easily on and off the board
Steam tip allows you to have steam in hard-to-reach areas
Sideways opening filling door
Steam iron
GC4860/27
Highlights
Steam tip
The unique steam tip of this Phi lips iron,
combines a particularly pointed front of the
soleplate with special elongated steam slots in
the tip, to reach right into the smallest and
most difficult areas for the best ironing results.
Easy to handle
The Philips steam i ron is designed to
manoeuvre it easily over the garment and
enabling you to reach easily even the hardest
to reach areas.
Lightweight iron
The iron has an optimal weight of 1.6kg making
it easy to constantly place the iron on the
board and back to its heelrest.
2600 W for quick heat up
2600 W for quick heat up and powerful
performance.
Steam up to 50 g/min
Continuous steam output of up to 50 g/min
gives you the perfect amount of steam to
efficiently remove all creases.
200 g steam boost
Applying the steam boost will release a steam
shot up to 200 g to remove even the toughest
creases
Easy filling
Sideways opening filling door
Automatic shut-off
The iron shuts off automatically when left
unattended. If it is left on it's heelrest it will
switch off in 8 minutes. When left on the
soleplate or on the side, it only takes 30
seconds before the iron shuts off.
SteamGlide Plus soleplate
For the best results you need a soleplate that
has the optimal balance between gliding and
stretching. This is offered through SteamGlide
Plus with its easy glide zone and perfect
stretch zone.
Philips Green Logo
Phili ps Green Products can reduce costs,
energy consumption and CO2 emissions. How?
They offer a significant environmental
improvement in one or more of the Philips
Green Focal Areas – Energy efficiency,
Packaging, Hazardous substances, Weight,
Recycling and disposal and Lifetime reliability.