Philips GC2025 Service Manual

Steam Iron Mistral

GC2025

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

- Color White/Green

- Ceralon soleplate

- Tank capacity (200 ml)

- Steam rate (25 g/min)

- Calc clean

- Shot of steam (45 g/min)

- Vertical steam

- Drip stop

- Integrated cord winder with clip

- Length of cord : 1.9 m.

Safety Information

- This product meets the requirements regarding interference suppression on radio and TV.

- After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as officially laid down at this moment.

Water Advice

Suitable for tap water use. However if the tap water in your area is very hard, we advise you to mix it with a equal portion of distilled water or to use distilled water only.

Soleplate

Ceralon, the name indicates the strong combination of a non-stick coating (“lon”) blended with ceramic (“Cera”) particles. The soleplate is coated with Ceralon material which is smooth gliding, high scratch resistance and good durability advantage over the non stick coatings.

Calc clean

The integrated Calc clean function ensure a longer lifetime using normal tap water by removing the scale out of the steam chamber.

Shot of steam (S.O.S)

The shot of steam knob releases a powerful shot of steam boost (up to 45 g/min), created by a separate shot of steam area. This helps getting rid of stubborn wrinkles easily.

TECHNICAL INFORMATION

Voltage : 120 V, 220 - 240 V Frequency : 50 - 60 Hz Power : 1300 W, 1600 W

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

Vertical Steam

The same shot of steam button can be used in a vertical position for curtains or hanging garments.

Drip stop

Water is only released to through the tank valve into the steam chamber if the soleplate temperature is high enough to evaporate all water. If the temperature is too low, the tank valve is closed by means of a bi-metal disc.

03/06

DISASSEMBLY ADVICE

GC2025

BACKPLATE 1

SWIVEL 2

CORDSET 3

Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp)

OPERATION KNOB 4

DOSING UNIT 5

INLAY 6

PUMP 8

NOZZLE 9

Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp) Remove Cord set 3 Remove Dosing unit 5 Remove Screw D 1x Remove Operation knob 4 Remove Screw C 2x Remove Inlay 6

DIAL 10

LIGHT CONDUIT 11

TANK SET 12

LIGHT 13

Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp) Remove Cord set 3 Remove Dosing unit 5 Remove Screw D 1x Remove Operation knob 4 Remove Screw C 2x Remove Inlay 6 Remove Dial 10 Remove Screw E 1x

COVER 14

THERMOSTAT BUSH 15

SOLEPLATE 16

SEALING SET 7

REPAIR INSTRUCTIONS

- Due to high voltage of the iron, ONLY the specified cordsets must be used.

- For standardisation reasons :

Dial : With English/Spanish text only.

Soleplate : Ceralon soleplate will be provided for all models. Type plate : No information about the typenumber and voltage has been stamped onto the typeplate. When replacing the typeplate, engrave at least the typenumber onto the typeplate with a sharp object.

- Thermostat, fitted to the soleplate 16 has already been adjusted by the supplier and secured by glue. To avoid mal-function of the

iron, NEVER re-adjust the thermostat.

NOTE : the thermostat can only be ordered together with the soleplate assembly 16.

- Parts with numbers from 100 and higher, cannot be ordered seperately.

OPTIONAL (accessories)

- No specific issues

2-4

+ 2 hidden pages