Philips GC1580 Service Manual

Steam Iron

GC1580

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

- Dynaglide soleplate coating

- Spray feature

- Self clean function

- Steam output (15 grams/min)

- Extra steam (25 grams/min)

- Detachable tank

- Water tank capacity 120 ml

- Auto-Shut-Off (ASO) feature

Safety Information

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.

BLUE

ELECTRONIC

MODULE

BLACK

RED

BROWN

INPUT

N

FUSE

E

L

HEATING
UNIT

THERMOSTAT

TECHNICAL INFORMATION

Voltage : 220 ~ 240 V
Frequency : 50 ~ 60 Hz

Power consumption : 1200 ~ 1440 W

Dimension (F-box) : 284 x 114 x 146 mm
Weight : 1100 grams

Self Clean

When the self clean button is pushed, a sudden fl ow of water
is released from the tank into the soleplate. This thermal
shock will cause water scale particles to come loose from the
steam chamber. These particles are then fl ushed out through
the steam vents by the water.

Auto-Shut-Off (ASO)

This is an energy saving feature that automatically cuts off the
power when the iron has been motionless:

- for 30 seconds in the horizontal position

- for 8 minutes in vertical position

When the iron is moved, it automatically switches on again.

NB: When the iron is plugged in at a horizontal position,

it will not be switched off during the first 2 minutes to
ensure proper heating up.

3

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

03/08

DISASSEMBLY ADVICE

GC1580

PUMP ASSY 3

remove DOSING UNIT 1
remove OPERATION KNOB 4
remove screw A
remove INLAY 102

LAMP ASSY 8

ASO MODULE 22

CORDSET 7

SWIVEL 6

LAMP COVER 9

remove screw B (2x)
remove BACK PLATE 5
remove screw C (2x) cord clip

DIAL 10

1

COVER 15

SOLEPLATE 17

THERMOSTAT BUSH 14

COVER SEAL 18

remove TANK ASSEMBLY 2
remove screw B (2x)
remove BACK PLATE 5
remove screw C (2x) cord clip
remove DIAL 10
remove screw D (2x)
remove screw E (2x)
remove HANDLE ASSEMBLY 13
remove screw F (3x)
remove COVER 15

REPAIR INSTRUCTIONS

- In case of any defect in the thermostat, the complete soleplate has to be replaced.

EJECTION KNOB 12

EJECTOR SPRING 20

SLIDING PIECE 21

2

- Parts with position number more than 100 cannot be ordered separately.

PARTS LIST

Pos Service code Description Consist of

1
2
3
4
5

6
7

8

9

10

11
12

13
14
15
16
17

18
19
20
21
22

4239 021 17810
4239 021 17480
4239 020 90560
4239 026 14520
4239 015 35840

4239 015 36160
4239 026 14310
4239 000 06800
4239 000 07320
4239 020 92720

4239 026 00880
4239 021 17490
4239 021 19150
4239 014 53790
4239 026 14490

4239 021 17470
4239 026 12360
4239 026 03360
4239 015 70150
4239 021 17230

4239 015 54220
4239 015 54210
4239 014 53490
4239 026 04740
4239 020 94030

Dosing unit (extra steam)
Tank assembly
Pump assembly (spray)
Operation knob (spray)
Backplate - PRC

Backplate - Hong Kong
Swivel
Cord set - PRC
Cord set - Hong Kong
Lamp assembly

Lamp cover
Dial - PRC
Dial - Hong Kong
Rattle spring
Ejection knob

Handle assembly
Thermostat bush
Cover
Ryton ring
Soleplate assembly

Cover seal
Tank top seal
Ejector spring
Sliding piece
ASO module

101,102,19

9,11,12,20,21

2-3