Philips FWM37/BK, FWM37/19 instructions for use

FWM37
MP3-CD Mini Hi-Fi System
México
Verifique que el voltaje de alimentación
sea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
AVISO IMPORTANTE
Philips Mexicana, S.A. de C.V. no se hace
responsable por daños o desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de
insectos o roedores (cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado
de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de las tensiones (voltaje), frecuencia (ciclaje) de alimentación eléctrica y las características que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como:
temblores, inundaciones, incendios, descargas eléctricas, rayos etc. o delitos causados por terceros (choques asaltos, riñas, etc.).
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción: Minisistema de Audio Modelo : FWM37/ 21 Alimentación: 110–127 / 220–240V~; 50–60 Hz Consumo: 35 W Importador: Philips Mexicana, S.A. de C.V. Domicilio: Av. La Palma No.6
Col. San Fernando La Herradura Huixquilucan
Localidad y Tel: Edo. de México C.P. 52784
Tel.52 69 90 00
Exportador: Philips Electronics HK, Ltd. País de Origen: China Nº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
¡
)
&
*
#
3
2
1
6
^
%
$
(
4
8 5
ª 7
MAX
DBB INC SURR
@
SOUND
MAX
4
%
#
2
3
9
^
! 7
&
0
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
5
6
7
ª
§
22
23
24
25
8
3
3
(for tuner installation)
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 28
Español --------------------------------------------- 51
-------------------------------------------------------- 74
English
Français
Español
5
Contents
English
General Information
Supplied accessories ............................................ 7
Acknowledgement ............................................... 7
Environmental information ................................ 7
Safety information ................................................ 7
Preparations
Rear connections ............................................. 8–9
Power Antennas connection Speakers connection
Optional connection ........................................... 9
Connecting other equipment to your system
Inserting batteries into the remote
control .................................................................... 9
Controls
Controls on the system and remote
control ........................................................... 10–11
Basic Functions
Plug and Play ........................................................ 12
Demonstration mode ........................................ 13
Switching the system on ................................... 13
Switching the system to standby mode ........ 13
Dim mode ............................................................ 13
Volume control ................................................... 14
Sound control ..................................................... 14
MAX sound
Virtual Ambience Control)
VAC ( DSC (Digital Sound Control) DBB (Dynamic Bass Boost) Incredible Surround
CD/MP3-CD Operations
Discs for playback .............................................. 15
About MP3 disc .................................................. 15
Loading discs ....................................................... 15
Playing discs ......................................................... 16
Replacing discs during playback ...................... 16
Selecting a desired track/passage .................... 16
Selecting a desired Album/Title
(MP3 disc only) ................................................... 16
Different play modes: SHUFFLE and REPEAT ...
................................................................................ 17
Programming the disc tracks ........................... 17
Erasing the programme ..................................... 17
Radio Reception
Tuning to radio stations .................................... 18
Storing preset radio stations .................... 18–19
Automatic preset programming Manual preset programming
Tuning to preset radio stations ....................... 19
Changing tuning grid .......................................... 19
Ta pe Operation/Recording
Loading tape ........................................................ 20
Playing tapes ........................................................ 20
Rewinding/Fast forwarding ............................... 21
General information on recording ................. 21
Preparation for recording ................................ 21
One touch recording......................................... 21
CD Synchronised start recording .................. 22
Dubbing tapes ..................................................... 22
External Sources
Listening to external sources .......................... 22
Clock/Timer
View clock ............................................................ 23
Clock setting ....................................................... 23
Timer setting ....................................................... 24
To deactivate the TIMER To activate the TIMER
Sleep timer setting ............................................. 24
Specifications ........................................... 25
Maintenance.............................................. 26
Troubleshooting ............................. 2627
6
General Information
MPORTANT! PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. FOR COUNTRIES THAT OPERATE AT 110V-127V, PLEASE ADJUST TO 110V-127V BEFORE YOU SWITCH ON THE SYSTEM.
Supplied accessories
–2 speaker boxes – remote control – MW loop antenna – FM wire antenna –AC power cord
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Safety information
Before operating the system, check that the
operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer.
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side.
The ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
Don’t expose the system to dripping or
splashing.
The lens may cloud over when the system is
suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates.
The mechanical par ts of the set contain self-
lubricating bearings and must not be oiled or lubricated.
When the system is switched to Standby
mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.
English
7
Preparations
Fix the claw to the slot
1
2
3
MW ANTENNA
SPEAKERS 6
R
+
–
L
–
+
AM ANTENNA
LR
speaker
(right)
speaker
(left)
MW loop 
antenna
AUX/
CDR
IN
AC
MAINS
AC power cord
FM AERIAL
75W
FM wire antenna
VOLTAGE
NOT FOR ALL
VERSIONS
SELECTOR
110V- 127V
220V- 240V
English
Rear connections
The type plate is located at the rear of the system.
A Power
– Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.
WARNING! –For optimal performance, use only the original power cable. –Never make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
B Antennas Connection
Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
MW Antenna
Position the antenna as far as possible from a TV,
VCR or other radiation source.
8
Preparations
1
2
FM Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA terminal.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-".
Fully inser t the stripped por tion of the speaker
wire into the terminal as shown.
Notes: –For optimal sound performance, use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminals. – Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
Optional connection
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Connecting other equipment to your system
Use a cinch cable to connect AUX/CDR to the analogue audio out terminals of an external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder).
Note: – If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX/CDR left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
Inserting batteries into the remote control
Insert two batteries (Type R06 or AA) into the remote control with the correct polarity as indicated by the "+" and "-" symbols inside the battery compar tment.
CAUTION! – Remove batteries if they are exhausted or will not be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed off properly.
English
9
Controls (illustrations on page 3)
English
Controls on the system and remote control
1 STANDBY ON
– to switch the system on or to standby mode.
2 DISC 1/2/3 (CD DIRECT 1/2/3)
– to select a disc tray for playback.
3 Source selection – to select the following :
CD (CD 1•2•3)
– to select disc tray 1, 2 or 3.
TUNER (BAND)
– to select waveband : FM or MW.
TAPE (TAPE 1•2)
– to select tape deck 1 or 2.
AUX (VIDEO/CDR)
– to select the input for an additional appliance :
AUX or CDR.
4 Mode Selection
à á SEARCH• TUNING
for MP3-CD ............. to select previous/next
album.
for CD ......................... to search backward/forward.
for Tuner ..................... to tune to a lower or higher
radio frequency.
for Tape ....................... to rewind or fast forward.
for Clock .................... (on the system only) to set the
hour.
Ç STOP
for CD/ MP3-CD .. to stop playback or to clear a
programme.
for Tuner ..................... (on the system only) to stop
programming.
for Tape .......................to stop playback or
recording.
for Demo ................... (on the system only) to
activate/deactivate the
demonstration.
for Clock .................... (on the system only) to exit
clock setting.
for Plug & Play ......... (on the system only) to exit
plug & play mode.
ÉÅ PLAY•PAUSE
for CD/ MP3-CD .. to start or interrupt playback.
for Tape ....................... to star t playback.
for Plug & Play ......... (on the system only) to initiate
and start plug & play mode.
í PREV / ë NEXT (- TITLE +)
for MP3-CD ............ to select previous/next title.
for CD ........................to skip to the beginning of
the current, previous, or next track.
for Tuner .................... to select a preset radio
station.
for Clock ................... (on the system only) to set
the minute.
5 DSC
– Selects different type of preset sound equaliser
settings. (OPTIMAL, JAZZ, ROCK or TECHNO)
6 VAC
– Selects different type of ambience-based
equaliser settings. (HALL, CONCERT or CINEMA)
7 DBB/INC. SURR (DBB, IS)
– to select the desired bass boost level. (DBB 1,
DBB 2, DBB 3 or DBB OFF)
– to activate or deactivate the surround sound
effect.
8 MAX SOUND
– to activate or deactivate the optimal mix of
various sound features.
9 REPEAT
– to playback track(s)/disc(s)/programme
repeatedly.
0 SHUFFLE
–Turns on/off the random play mode.
10
! DIM MODE
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
@ # OPEN
– to open the tape deck door.
# PROGRAM
for CD/ MP3-CD .. to programme disc tracks.
for Tuner ..................... to programme preset radio
stations.
for Clock .................... to select 12- or 24-hour
clock mode.
$ n
– to connect headphones.
% VOLUME (VOL +/-)
– to increase or decrease the volume.
^ RECORD
– to star t recording on tape deck 2.
& AUTO REPLAY
– to select continuous playback in either AUTO
REPLAY or ONCE MODE only.
* Disc tray ( OPEN•CLOSE
– to open or close the disc tray.
) DISC CHANGE
–to change disc(s).
¡ Display screen
– to view the current status of the system.
SLEEP
– to activate/deactivate or set the sleep timer.
Controls
English
£ MUTE
– Mutes or restores the volume.
TIMER ON/OFF
– activates/deactivates the timer function.
B
– to switch the system to standby mode.
§ DISPLAY
– Display the album and title name for MP3 disc.
Tape deck 1
Tape deck 2 ª CLOCK•TIMER (CLK/ TIMER)
– to view the clock.
Notes for remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (CD or TUNER, for example). – Then select the desired function (É,
ë
, for example).
í
,
11
Basic Functions
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
SOUND
MAX
VAC
DBB INC SURR
English
IMPORTANT! Before you operate the system, complete the preparation procedures.
Plug and Play (for tuner installlation)
Plug and Play allows you to store all available radio stations automatically.
First time setup/power up
1 When you turn on the main supply, "AUTO
INSTALL - PRESS PLAY" is displayed.
2 PressÉÅ on the system to start installation.
➜ "PLUG AND PLAY" .... "INSTALL" is
displayed, followed by "TUNER" and "AUTO".
PROG starts flashing.All available radio stations with sufficient
signal strength will be stored automatically, starting from FM and followed by MW band.
When all the available radio stations are
stored or the memory for 40 presets are used, the last preset radio station will be played.
To reinstall Plug and Play
1 In standby or demonstration mode, press and
holdÉÅ on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2 PressÉÅ again to start installation.
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
Press Çon the system.If you do not complete the Plug and Play
installation, the function will be restarted when you next turn on the main supply again.
Notes: – When the power is turned on, the disc tray may open and close to initialise the system. – If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed. – During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode.
12
Basic Functions
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
In standby mode, press and holdÇon the
system for 5 seconds to switch to demonstration.
To deactivate the demonstration
Press and holdÇon the system for 5 seconds to
switch to standby mode.
Switching the system on
In standby/demonstration mode
Press STANDBY ON/B to switch on the last
selected source.
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX.
Press OPEN•CLOSE, DISC 1/2/3(CD 1/2/
3), DISC CHANGE.
The system will switch to CD mode.
Switching the system to standby mode
In demonstration mode
Press and hold Ç on the system.
Dim mode
You can select the desired brightness for the display.
In any source mode, press DIM MODE
repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
DIM is shown, except for DIM OFF mode.
Volume control
Adjust VOLUME to increase (turn knob clockwise or press VOLUME +) or decrease (turn knob anti-clockwise or press VOLUME -) the sound level.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the system.
The speakers will be muted.
English
In any other source mode
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.
To switch off the volume temporarily
Press MUTE on the remote control.Playback will continue without sound and
"MUTE" is displayed.
To restore the volume, press MUTE again or
increase the volume level.
13
Basic Functions
English
Sound control
For optimal sound listening, select only one of the following navigation sound controls at a time : MAX, DSC or VAC.
MAX Sound
MAX sound provides the best mixture of various sound features (DSC, VAC, DBB, for example).
Press MAX (or MAX on the
remote control) repeatedly.
If activated, MAX SOUND is shown and the
MAX SOUND button lights up.
If deactivated, “MAX OFF” is displayed and the
MAX button black out.
Note: – When MAX sound is selected, all other sound navigation will switch off automatically.
VAC (Virtual Ambience Control)
The VAC feature enables you to adjust the system to select a type of environment.
Press VAC to select : CINEMA, HALL or
CONCERT.
The selected VAC is shown.
DSC (Digital Sound Control)
The DSC feature enables you to enjoy special sound effects that have preset equaliser settings, providing the best music reproduction.
1 Press DSC to select : OPTIMAL, JAZZ, ROCK
or TECHNO.
The selected DSC is shown.
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the bass response.
1 Press DBB to select : DBB 1, DBB 2, DBB 3 or
DBB OFF.
The selected
OFF mode.
Note: – Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment.
DBB is shown, except for DBB
Note: – When you select VAC, Incredible Surround will switch on automatically.
14
Incredible Surround
The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect.
Press and hold DBB•INC SURR (or IS on the
remote control) until “INCR SUR” is display.
If activated, INCR SUR is shown and
INCR SUR” is displayed.
If deactivated, “IS OFF” is displayed.
CD/MP3-CD Operations
2
2
1
1
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
VAC
DBB INC SURR
SOUND
MAX
English
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc into each tray.
Discs for playback
This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. MP3-CDs (CD-ROMs with MP3 tracks)
About MP3 disc
Supported formats
– ISO9660, Joliet, Multisession – Max. track number plus album is 255 – Max. nested directory is 8 levels – The max. album number is 32 – The max. MP3 program track number is 99 – Suppor ted VBR bit-rate – Supported sampling frequencies for MP3 disc
are: 32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps)
Loading discs
1 Press OPEN•CLOSE to open the disc tray. 2 Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
The disc tray will rotate until the empty tray
is ready for loading.
15
CD/MP3-CD Operations
English
3 Press OPEN•CLOSE to close the disc tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time will appear on the display.
A lighted button indicates that a disc is loaded
on the disc tray.
For MP3 disc, the name of the first album
and title will be scrolled through the display once and followed by "AXX TXXX".
Notes: – Load the discs with the label side facing up. –To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. –For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
Playing discs
To play current disc on the disc tray
Press ÉÅ .The current discs will play once, then stop.During playback, the selected disc tray, track
number and elapsed playing time of the current track are displayed.
For MP3 disc, TITLE is shown. For mixed
mode discs, only one mode will be selected for playback depending on the recording format.
To play the selected disc only
In CD mode, press DISC 1/2/3 (or CD 1/2/3
on the remote control).
The selected disc will play once, then stop.
To interrupt playback
Press ÉÅ .The current track time flashes.
To resume playback, press ÉÅ again.
To stop playback
Press Ç.
For MP3-CD
During playback, press DISPLAY to show the
album and title name.
Replacing discs during playback
1 Press DISC CHANGE.
The disc tray will open without interrupting
current playback.
2 To change the inner disc, press DISC
CHANGE again.
"CHANGING DISC" is displayed and the disc
will stop playing.
The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
Selecting a desired track/passage
To search for a particular passage during playback
Press and hold à or á and release it when
the desired passage is located.
During searching, the volume will be reduced.
To select a desired track
Press í or ë repeatedly until the desired
track is displayed.
If playback is stopped, press ÉÅ to start
playback.
Selecting a desired Album/Title (MP3 disc only)
To select a desired album
Press ALBUM -/+ (à or á) repeatedly.The album’s name will scroll through the
display once.
To select a desired title
● Press TITLE -/+ (í / ë) repeatedly. ➜ The title’s name will scroll through the display
once.
Note: – The album and title will only displayed once when selected. To view again, press the DISPLAY button repeatedly to display ALBUM and TITLE alternatively.
16
CD/MP3-CD Operations
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback.
1 Press REPEAT on the remote control to
select:
➜ "REPEAT TRACK" – to repeat playback of
the current track.
➜ "REPEAT DISC" – to repeat playback of
the current disc.
➜ "REPEAT OFF" – to stop repeat function
and playback current disc.
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
2 Press SHUFFLE on the remote control to
select:
➜ "SHUFFLE ON" – to random playback of
the current disc.
➜ "SHUFFLE OFF" – to stop shuffle function
and playback current disc.
To resume normal playback, press SHUFFLE
until "SHUFFLE OFF" is displayed.
REP or SHUF is shown, except SHUFFLE OFF
mode.
Note: – During program play mode or playing a MP3 CD, it is not possible to repeat playback the current disc (Repeat Disc mode).
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
5 Press PROG to store the track. 6 To end programming, press Ç once.
PROG stays and the programme mode
remains active.
The total number of tracks programmed and
the total playing time are displayed.
For MP3 disc, total playing time will not be
shown.
7 To star t programme play, pressÉÅ.
➜ "PLAY PROGRAM" is displayed.
Notes: – It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks. – If the total playing time is more than "99:59" then "--:--" is displayed instead of the total playing time. – If you attempt to programme more than 99 tracks, "FULL" is displayed. – During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically.
To review the programme
Stop playback and pressí or ë repeatedly.
To exit review mode, press Ç.
English
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.
1 Load the desired discs on the disc tray (refer to
“Loading discs”).
2 Press DISC 1/2/3 to select a disc.
3 Press PROG to start programming.
PROG starts flashing.
4 Press í or ë repeatedly to select the desired
track.
Erasing the programme
Press Ç once when playback is stopped or
twice during playback.
PROG disappears and "PROGRAM CLEARED"
is displayed.
Note: – The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened.
For Recording, please refer to “Tape Operation/Recording”.
17
Radio Reception
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
VAC
DBB INC SURR
SOUND
MAX
English
Tuning to radio stations
1 Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the display.
2 Press TUNER again to select the desired
waveband : FM or MW.
3 Press and hold à or á until the frequency
indication starts to change, then release.
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4 Repeat step 3 if necessar y until you find the
desired radio station.
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in the memory.
Automatic Preset Programming
Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1 Press TUNER to select TUNER mode.
To begin automatic preset from a desired preset number
Press í or ë to select the desired preset
number.
If a radio station has been stored in one of
the presets, it will not be stored again under another preset number.
2 Press and hold PROGRAM until "AUTO" is
displayed.
PROG starts flashing.All available radio stations with sufficient signal
strength will be stored automatically, starting from FM and followed by MW band.
When all the available radio stations are
stored or the memory for 40 presets are used, the last preset radio station will be played.
To stop storing the automatic preset
Press PROGRAM or Ç on the system.
Note: – If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.
18
Radio Reception
Manual Preset Programming
1 Tune to your desired radio station (refer to
“Tuning to radio stations”).
2 Press PROGRAM.
PROG starts flashing.The next available preset number is displayed
for selection.
To store the radio station to another preset number
Press í or ë to select the desired preset
number.
3 Press PROGRAM again to store the radio
station.
PROG disappears.
Repeat steps 1–3 to store other radio stations.
To exit manual preset mode
Press Ç on the system.
Notes: – If you attempt to store more than 40 preset radio stations, "FULL" is displayed. – During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically.
Tuning to preset radio stations
Once you’ve programmed the radio stations,
press í or ë to select the desired preset number.
The preset number, radio frequency, and
waveband are displayed.
Changing tuning grid (not available for
all versions)
In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz.
Changing the tuning grid will erase all previously stored preset radio stations.
1 Disconnect the system from the AC power
supply (pull out the AC power cord).
2 While holding down TUNER and á on the
system, reconnect the system to the AC power supply.
The display will show "GRID 9" or
"GRID 10".
Notes: – GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. – The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
English
For Recording, please refer to “Tape Operation/Recording”.
19
Ta pe Operation/Recording
VAC
DBB INC SURR
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
SOUND
MAX
English
IMPORTANT! – Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. – C-120 tape is extremely thin and is easily deformed or damaged. It is not recommended for use in this system. – Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV or speaker).
Loading tape
1 Press OPEN to open the tape deck door.
2 Load the tape with the open side downward and
full spool to the left.
3 Close the tape deck door.
20
Playing tapes
To playback a selected tape deck
1 Press TAPE (or TAPE 1/2 on the remote
control) repeatedly to select tape deck 1 or 2.
2 Press ÉÅ .
To stop playback
Press Ç.
To select automatic replay or one time playback
Press AUTO REPLAY (or A.REPLAY)
repeatedly to select the different playback modes.
➜ "AUTO REPLAY" ( ) or "ONCE" ( )
is displayed.
AUTO REPLAY …the tape will rewind
ONCE ..............the tape will playback the
automatically at the end of playback and replay again. It will replay up to a maximum of 20 times.
selected side once and then stop.
Ta pe Operation/Recording
Rewinding / Fast forwarding
1 Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press Ç to stop rewinding or fast forwarding.
Note: – During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example).
General information on recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB, DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
To prevent accidental
recording, break out the tab on the left shoulder of the tape side you want to protect.
If “CHECK TAPE” is displayed,
the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
IMPORTANT! – Recording is permissible if copyright or other rights of third parties are not infringed upon. – Recording is possible only on tape deck 2.
Preparation for recording
1 Press TAPE to select TAPE 2. 2 Load a recordable tape into tape deck 2 with full
spool to the left.
3 Prepare the source to be recorded.
CD – load the disc(s). TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
REC starts flashing.
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording
1 Press CD, TUNER or AUX to select the
source.
2 Star t playback of the selected source. 3 Press RECORD to star t recording.
To stop recording
Press Ç on the system.
English
Note: – One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" is displayed.
21
Ta pe Operation/Recording
SOUND
MAX
English
CD Synchronised start recording
1 Press CD to select the disc.
Press í or ë to select the desired track, then
press RECORD to start recording.
You can programme the tracks in the order you
want them to be recorded (refer to “CD Operation - Programming the disc tracks”).
2 Press RECORD to star t recording.
The disc will start playback automatically.
To stop recording
Press Ç.Recording and disc playback will stop
simultaneously.
Dubbing tapes
1 Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
2 Press RECORD.
Playing and recording will start simultaneously. ➜ "DUB" is displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.
To stop dubbing
Press Ç.
Notes: – Dubbing of tapes is possible only from tape deck 1 to tape deck 2. –To ensure good dubbing, use tapes of the same length.
External Sources
Listening to external sources
1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR terminals of your system.
2 Press AUX to select external equipment.
➜ "AUX" or "CDR" is displayed.
22
Note: – All the sound control features (DSC or DBB, for example) are available for selection. – Refer to the operating instructions for the connected equipment for details.
For Recording, please refer to “Tape Operation/Recording”.
Clock/Timer
DISC
VAC
DSC
ALBUM
.
REC
SHUFFLE
VAC
DBB INC SURR
SOUND
MAX
English
IMPORTANT! – Use CLOCK•TIMER on the set to set the clock and timer. – Use CLOCK•TIMER (CLK•TIMER) to set the clock and timer.
View clock
The clock (if it is set) will be shown in standby mode.
To view the clock in any source mode (CD or TUNER for example)
Press CLOCK•TIMER.The clock is displayed for a few seconds.If the clock has not been set, "--:--" is
displayed.
Clock setting
The clock can be set in either 12-hour or 24-hour mode ("AM 12:00" or "00:00" for example)
1 In standby or view clock mode, press
CLOCK•TIMER once. In other source mode, press CLOCK•TIMER twice.
2 Press PROGRAM repeatedly to select clock
mode.
➜ "AM 12:00" or "00:00" starts flashing.
3 Press à or á on the system repeatedly to set
the hour.
4 Press í or ë on the system repeatedly to set
the minute.
5 Press CLOCK•TIMER again to store the
setting.
The clock starts working.
To exit without storing the setting
Press Çon the system.
Notes: – The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs. – During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.
23
Clock/Timer
English
Timer setting
The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time, serving as an alarm to wake you up.
IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The timer will always be switched on after it has been set. – The timer will not start if a recording is in progress. – The volume of the timer will increase gradually from the minimum level to the last tuned volume level.
1 Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
The last timer setting starts flashing.TIMER starts flashing.The selected source will be lighted and
flashing.
2 Press CD, TUNER or TAPE to select the
desired source.
Before setting timer, make sure the music source
has been prepared. CD – Load the disc(s). To start from a specific track, make a programme (refer to “CD Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape
deck 2.
3 Press à or á on the system repeatedly to set
the hour for the timer to start.
4 Press í or ë on the system repeatedly to set
the minute for the timer to start.
5 Press CLOCK•TIMER to store the star t time.
TIMER remains on the display.
At the preset time, the selected source will play.
To exit without storing the setting
Press Çon the system.
Notes: – When the preset time is reached and the selected disc tray is empty, the next available disc will be selected. If all the disc trays are not available, Tuner will be selected automatically. – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
To deactivate the TIMER
Press TIMER ON/OFF on the remote control.The display will show "OFF" and
disappear from the display.
To activate the TIMER
Press TIMER ON/OFF on the remote control.The last set timer information will be shown
for a few seconds and TIMER will appear on the display.
TIMER will
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1 Press SLEEP on the remote control repeatedly
to select a preset time.
The selections are as follows (time in
minutes):
15 30 45 60 OFF 15 …
"SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP button.
SLEEP is shown, except for "OFF" mode.The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10 seconds is displayed.
"SLEEP 10" "SLEEP 9".... "SLEEP 1"
"SLEEP"
To check the remaining length of time after sleep timer is activated
Press SLEEP once.
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
The display will show the next sleep timer
options.
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
24
Specifications
AMPLIFIER
Output power ...................................... 2000 W PMPO
.................................................................... 2 x 60 W RMS
Signal-to-noise ratio .......................... 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Input sensitivity
AUX/CDR In .......................................... 500 mV / 1V
Output
Speakers .................................................................... 6
Headphones ...................................... 32 – 1000
(1) (6 , 1 kHz, 10% THD)
CD/MP3-CD PLAYER
Number of programmable tracks ......................... 99
Frequency response ............. 20 – 20000 Hz -3dB
Signal-to-noise ratio ....................................... 75 dBA
Channel separation .......................... 60 dB (1 kHz)
Total harmonic distortion ........................... < 0.003%
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
Sampling frequencies ....................... 32, 44.1, 48 kHz
TUNER
FM wave range ...................................87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz)........... 530 – 1700 kHz
Tuning grid ............................................................ 9/10 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 wire
MW ............................................................ Loop antenna
(128 kbps advised)
TAPE PLAYER
(1)
Frequency response
Normal tape (type I) ...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................. ≥ 48 dBA
Wow and flutter ......................................... 0.4% DIN
SPEAKERS
System 3-way; double port bass reflex
Impedance ........................................................................ 6
Woofer ...................................................................... 1 x 5.5"
Tw eeter.......................................................................... 1 x 2"
Dimensions (w x h x d) . 248 x 310 x 195 (mm)
Weight................................................................ 3.3 kg each
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power
For Version /21-21M .. 110 – 127 / 220 – 240 V;
....................................................... 50/60 Hz Switchable
For Version /30 ........................ 230 – 240 V; 50 Hz
Power Consumption
Active ......................................................................... 35 W
Standby .................................................................. 15 W
Dimensions (w x h x d) .. 265 x 310 x 367 (mm)
Weight (without speakers) .............................. 7.15 kg
Specifications and external appearance are subject to change without notice.
English
25
Maintenance
C CB
B
A
English
Cleaning the Cabinet
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
When a disc becomes dir ty,
clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in circular motion.
Do not use solvents such as
benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.
Cleaning the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
To ensure good recording and playback quality,
clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the heads by playing a
cleaning tape once.
Demagnetising the heads
Use a demagnetising tape available at your
dealer.
Tr oubleshooting
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
Problem
NO DISC” is displayed.
DISC NOT FINALIZED” is displayed.
26
Insert a disc.Check if the disc is inserted upside down.Wait until the moisture condensation at the lens
has cleared.
Replace or clean the disc, see “Maintenance”.Use a finalized CD-RW or a correct MP3-CD
format disc.
Use a finalised CD-RW or CD-R.
Solution
Radio reception is poor.
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and your TV or VCR.
English
Recording or playback cannot be made.
The tape deck door cannot open.
The system does not react when buttons are pressed.
Sound cannot be heard or is of poor quality.
The left and right sound outputs are reversed.
The remote control does not function properly.
Clean deck parts, see “Maintenance”.Use only NORMAL (IEC I) tape.Apply a piece of adhesive tape over the missing
tab space.
Remove and reconnect the AC power plug and
switch on the system again.
Remove and reconnect the AC power plug and
switch on the system again.
Adjust the volume.Disconnect the headphones.Check that the speakers are connec ted
correctly.
Check if the stripped speaker wire is clamped.Make sure the MP3-CD was recorded within
32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.
Check the speaker connections and location.
Select the source (CD or TUNER, for example)
before pressing the function button (É,í,ë).
Reduce the distance between the remote
control and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.Point the remote control directly towards the IR
sensor.
The time is not working.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
The system displays features automatically and buttons start flashing.
Set the clock correctly.Press and hold CLOCK•TIMER to switch on the
timer.
If recording or tape dubbing is in progress, stop
recording.
Press DIM to select DIM OFF display mode.
Power has been interr upted or the power cord
has been disconnected. Reset the clock/timer.
Press and hold Çon the system to switch off
the demonstration.
27
Loading...