Philips FMXXFD02B-00 User Manual

EN Blue edition Click here 2

FR Blue edition Cliquez ici X

DE Blue edition Hier klicken X

ES Blue edition Haga clic aquí X

NL Blue edition Klik hier X

IT Blue edition Fare clic qui X

PR Blue edition Clique aqui X

RU Blue edition Щелкните здесь X

FMXXFD02B/00

Register your product and get support at

www.philips.com/welcome

USB Flash Drive

1 Important

Note:

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

• onsult the dealer or an experienced radio/TV technician for help.

The shielded interface cable and connectors must be used in order to
comply with the limits for digital device pursuant to subpart B of Part
15 of FCC Rules.

Electric-, Magnetic- and Electromagnetic Fields (EMF)

Philips Royal Electronics manufactures and sells many products
targeted at consumers, which, like any electronic apparatus, in
general have the ability to emit and receive electro magnetic
signals.
One of Philips’ leading Business Principles is to take all necessary
health and safety measures for our products,to comply with all
applicable legal requirements and to stay well within the EMF
standards applicable at the time of producing products.
Philips is committed to develop,produce and market products that
cause no adverse health effects.
Philips confirms that if its products are handled properly for their
intended use, they are safe to use according to scientific evidence
available today.
Philips plays an active role in the development of international EMF
and safety standards, enabling Philips to anticipate further
developments in standardization for early integration in its
products.

Note: Keep this detailed user manual for future reference.

Warning

• To prevent fire or shock hazard, do not expose the unit to rain or
moisture.

• To avoid electric shock,do not open the cabinet. Refer servicing to
qualified personal only.

• Keep away from children. If swallowed, promptly see a doctor.

5

4

3

2

1

2

ENGLISH

Note

Data is safe in the following environments:In X-ray security systems at
airports and in magnetic fields with strengths not exeeding 3,500 Oe.

For customers in the U.S.A.

Changes or modifications made to this equipment not expressly
approved by company may void the FCC authorization to operate this
equipment.

Operation is subject to the following two conditions:

this device my not cause harmful interference,and
this device must accept any interference received, including
interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Part 15 of the FCC Rules and with RSS-210
of Industry Canada.

For customers in Europe

This product conforms to the following European Directives:
89/336/EEC, 2006/95/EEC (safety directive) and 93/68/ECC (EC
Marking Directive).This product complies with EN55022 Class B and
EN55024 for use in the following areas;residential, commercial, and
light-industrial.

Notes on Use

• The USB flash drive may not function correctly if it is connected to
the computer when the computer is started up, restarted, or
restored from sleep mode.Always disconnect the USB flash drive
from the computer before performing any of these operations.

• Do not place the drive in locations that are:
– extremely hot or cold;
– vibrating;
– exposed to corrosive gases;
– dusty or dirty;
– very humid;
– exposed to direct sunlight.

• Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and other countries.

• Mac and Macintosh are trademarks of Apple Computer,Inc.,
registered in the U.S.and other countries.

• Other system names and product names that appear in this manual
are registered trademarks or trademarks of their respective
owners. Note that the ™ and ®symbols are not used in this
manual.

• Power consumption in standby mode:< 100 mA.

• Our product warranty is limited only to the USB flash drive itself,
when used normally in accordance with these operating instructions
and with the accessories that were included with this unit in the
specified or recommended system environment.Services provided
by the Company, such as user support,are also subject to these
restrictions.

• The Company cannot accept liability for damage or loss resulting
from the use of this unit, or for any claim from a third party.

2

1

3

ENGLISH