Philips FM64FD05D, FM64FD75D, FM32FD70E User manual

EN

Notes

• The USB ash drive may not function correctly if it is connected to the computer when
the computer is started up, restarted, or restored from sleep mode. Always disconnect
the USB ash drive from the computer before performing any of these operations.

• Do not place the drive at locations that are:

- extremely hot or cold;

- vibrating;

- exposed to corrosive gases;

- dusty or dirty;

- very humid;

- exposed to direct sunlight.

• Power consumption in standby mode: < 100 mA.

• Our product warranty is limited only to the USB ash drive itself, when used normally in
accordance with these operating instructions in the specied or recommended system
environment. Services provided by the company, such as user support, are also subject to
these restrictions.

• The company cannot accept liability for damage or loss resulting from the use of this unit,
or for any claim from a third party.

How to use

1. Open the protective cap of the USB drive.

2. Connect the USB drive to the USB port of your device.

3. A software package will automatically start up enabling you to activate various applications.

4. Do not remove the USB ash drive from the computer USB port while copying and saving
data otherwise the drive will no longer be recognized by your system.

User Manual | USB ash drives

How to format the USB drive

1. Go to “This PC”.

2. Right click the USB drive.

3. Select “Format…”.

4. Select the le system you need, and then select “Start”.

• Please note that formatting the USB drive will erase all data in the USB drive
and the data cannot be restored.

EN

How to disconnect the USB drive

• Windows XP and higher:

1. Go to “This PC”.

2. Right click the USB drive.

3. Select “Eject”.

4. After a message of “Safe to Remove the Hardware” pop up,
remove the USB ash drive from the computer’s USB port.

• Mac OS 9.0 and higher:

1. Drag the drive’s icon to the “Trash”.

2. After conrming that the USB ash drive is in standby mode,
remove the USB ash drive from the computer’s USB port.

System supports

• USB 2.0, USB 3.0 and USB 3.1 ports

• Windows® XP and higher

• Mac OS 9.0 and higher

• Linux 2.4.0 and higher

For warranty information and support please visit

www.philips.com/support

User Manual | USB ash drives