Soundbar 5.1.2
Fidelio B95
TAPR802
User manual
Register your product and get support at
www.philips.com/support
Contents
1 |
Important |
2 |
|
Safety |
2 |
|
Care for your product |
3 |
|
Care of the environment |
3 |
|
Compliance |
3 |
|
Help and support |
3 |
|
|
|
2 |
Your product |
4 |
|
What’s in the box |
4 |
|
Main unit |
4 |
|
Remote control |
5 |
|
Wireless subwoofer |
6 |
|
Connectors |
6 |
|
|
|
3 |
Connect and set up |
7 |
|
Placement |
7 |
|
Connect to TV |
7 |
|
Connect TV or digital devices |
|
|
through HDMI |
8 |
|
Connect audio from TV or |
|
|
other devices |
8 |
|
Connect to power |
9 |
|
Pair up with the subwoofer |
9 |
|
Connect to Wi-Fi |
|
|
(Wireless Operation) |
10 |
|
|
|
4 |
Use your product |
12 |
|
Insert batteries before using |
|
|
the remote control |
12 |
|
Adjust the volume |
12 |
|
Choose your sound |
12 |
|
Dolby Atmos® |
13 |
|
Play audio through Bluetooth |
14 |
|
MP3 player |
14 |
|
Play-Fi multi-room |
15 |
|
Chromecast(audio) / AirPlay2 |
|
|
/ Alexa 3PDA |
15 |
|
Listen to Spotify |
15 |
5 |
Settings |
16 |
|
Adjust speaker level |
16 |
|
Set display brightness |
16 |
|
Auto standby |
16 |
|
Apply factory settings |
16 |
|
|
|
6 |
Update software |
17 |
|
Update software via Wi-Fi |
17 |
|
Update via USB |
17 |
|
|
|
7 |
Wall mount your product |
18 |
|
Wall mount |
18 |
|
|
|
8 |
Product speci•cations |
19 |
|
|
|
9 |
Troubleshooting |
20 |
1EN
1 Important
Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.
Safety
Risk of electric shock or re!
•Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
•Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
•Never place the product and accessories near naked •ames or other heat sources, including direct sunlight.
•Never insert objects into the ventilation slots or other openings on the product.
•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, €re or the like.
•Disconnect the product from the power outlet before lightning storms.
•When you disconnect the power cord, always pull the plug, never the cable.
•Use the product in tropical and/or moderate climates.
Risk of short circuit or re!
•For identi€cation and supply ratings, see the type plate at the back or bottom of the product.
•Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the
2EN
product to the power outlet if the voltage is di†erent.
Risk of injury or damage to this product!
•For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Use
only the supplied wall mount bracket (if available). Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.
•Never place the product or any objects on power cords or on other electrical equipment.
•If the product is transported in temperatures below 5°C, unpack the product and
wait until its temperature matches room temperature before connecting it to the power outlet.
•Parts of this product can be made of glass. Handle with care to avoid injury and damage.
Risk of overheating!
•Never install this product in a con€ned space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
Risk of contamination!
•Do not mix batteries (old and new or carbon and alkaine, etc.).
•Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Batteries contain chemical substances, they should be disposed of properly.
Risk of swallowing batteries!
•The product/remote control may contain an AAA battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
•If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
•When you change the batteries, always keep all new and used batteries out of
reach of children. Ensure that the battery compartment is completely secure after you replace the battery.
•If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
~
AC voltage
Use only the power supplies listed in the user manual.
Care for your product
Use only micro•ber cloth to clean the product.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol on a product means that the product is covered by European Directive 2012/19/EU.
3EN
This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste.
Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see battery installation section.
Compliance
This product complies with the radio interference requirements of the European Community.
Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. You can •nd the Declaration of Conformity on www.p4c.philips. com.
Help and support
For extensive online support, visit
www.philips.com/support to:
•download the user manual and the quick start guide
•watch video tutorials (available only for selected models)
••nd answers to frequently answered questions (FAQs)
•email us a question
•chat with our support representative.
Follow the instructions on the website to select your language, and then enter your product model number.
Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can •nd this information on the back or bottom of your product.
2 Your product
Congratulations on your purchase, and
of product software upgrade), register your product at www.philips.com/support .
Main unit
This section includes an overview of the main unit.
1 |
2 |
3 |
4 |
5 |
6 |
What’s in the box
Check and identify the items in the package:
•Soundbar x1
•Wireless subwoofer x1
•Remote control x1
•AAA battery x2
•Power cord* x2
•Power adapter x1
•Wall mount kit (wall bracket x2, screw x 6, dowel x2)
•Quick start guide
•Warranty card
•Safety sheet
•Mounting guide
*Power cord quantity and plug type vary by regions.
+/- (Volume)
• Increase or decrease volume.
(Play/Pause)
•Play, pause or resume in Bluetooth playback.
(Source)
•Press to select an input source for this product.
(Standby-On)
•
standby)
•
standby)
Display panel
Power and Wi-Fi LED indicator
LED |
Display |
Power state |
Wi-Fi network |
Sources available to use |
indicator |
Panel |
|
|
|
Color |
|
|
|
|
|
|
|
|
|
White |
|
Eco standby |
Disconnected |
All sources are shut down. |
|
|
|
|
|
Amber |
|
Semi- |
Connected |
Play-Fi, Chromecast(Audio), AirPlay2, |
|
|
standby |
|
Alexa 3PDA & Spotify Connect |
|
|
|
|
(These sources are running in |
|
|
|
|
background.) |
Amber |
On |
Power on |
Connecting |
HDM1, HDMI2, E-ARC(ARC), OPTICAL & |
|
|
|
|
BT |
|
|
|
|
|
Amber |
On |
Power on |
Connected |
All sources are ready. |
|
|
|
|
|
4 EN
Remote control
This section includes an overview of the remote control.
1 2
9
3
4 8 5
7 6
A(Standby-On)
•Short press: Switch On / O (Semistandby)
•Long press(5 sec): Switch O (Eco standby)
B(Source)
Select an input source for this product.
•HDMI 1: Switch your source to the HDMI IN 1 connection.
•HDMI 2: Switch your source to the HDMI IN 2 connection.
•E-ARC: Switch your source to HDMI E-ARC or ARC connection.
•OPTICAL: Switch your audio source to the optical connection.
•AUDIO IN: Switch your audio source to AUDIO IN connection (3.5mm jack).
•BT: Switch to Bluetooth mode.
Note
Play-Fi multi-room, Chromecast(Audio), AirPlay2, Alexa 3PDA & Spotify Connect are running in background when Wi-Fi is
connected. They are selected and controlled by respective casting device/APP.
CNavigation buttons
•Up: Increase volume or select the previous item in the menu.
•Down: Decrease volume or select the next item in the menu.
•Left: Skip to the previous track in playback mode or select level down in the menu mode.
•Right: Skip to the next track in playback mode or select level up in the menu mode.
•Center: Play, pause or resume in playback mode. Con–rm a selection.
D (Menu)
Enter the general settings menu.
SUB |
Subwoofer gain control |
CTR |
Center speakers relative |
|
volume level |
SIDE L |
Left side –ring speaker |
|
relative volume level |
SIDE R |
Right side –ring speaker |
|
relative volume level |
DIM |
Display brightness level |
DISP |
Display auto o |
BT PAIR |
Start BT pairing (BT |
|
source only) |
UPGRADE |
Firmware upgrade via |
|
USB |
E (Equalizer)
Select surround sound modes: (Movie/
Music/Voice/Sport/Custom).
MOVIE |
Preset EQ for movie |
MUSIC |
Preset EQ for music |
VOICE |
Prest EQ for news or talk |
|
show |
SPORT |
Preset EQ for sport |
|
programme |
CUSTOM |
User custom EQ (controlled |
|
in Philips Sound app) |
5EN
F
Select a height e ect level for Dolby Atmos.
G |
(Sound) |
|
|
Select sound settings: (Surround/DRC/ |
|
|
IMAX/Dialogue/Bass/Treble/Sync). |
|
|
|
|
|
SUR |
Surround sound options |
|
DRC |
Dynamic Range control |
|
IMAX |
IMAX mode options |
|
DLG CTRL |
Adjust dialogue level (for |
|
|
DTS-X only) |
|
BASS |
Adjust bass level for |
|
|
preset EQ |
|
TREBLE |
Adjust treble level for |
|
|
preset EQ |
|
SYNC |
Adjust audio and video |
|
|
sync delay (HDMI only) |
H
Exit settings.
I
Mute or restore volume.
Wireless subwoofer
This product comes with a wireless subwoofer.
CONNECT
1 2
AC MAINS~
3
ACONNECT (Connect)
Press and hold for 5 seconds to enter the pairing mode between the main unit and the subwoofer.
BSubwoofer indicator
•When the power is turned on, the indicator lights up.
•During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.
6EN
•When the pairing succeeds, the indicator lights up white.
•When the pairing fails, the indicator blinks white slowly.
•When the wireless connection is disconnected for 1 minute, the indicator turns o .
CAC MAINS
Connect to the power supply.
Connectors
This section includes an overview of the connectors available on the main unit.
1 |
5 |
|
2 |
||
|
||
3 |
6 |
|
|
||
4 |
|
ADC IN
Connect to the power adapter.
BAUDIO IN
Connect to an audio output (3.5mm jack) on a device.
COPTICAL IN
Connect to an optical audio output on the TV or a digital device.
DUSB (For service)
Connect to a USB •ash drive to upgrade software of this product.
EHDMI OUT (eARC/ARC)
Connect to the HDMI (eARC/ARC) input on the TV.
FHDMI IN 1 / HDMI IN 2
Connect to the HDMI output on a digital device.