Philips FET941D User Manual

Philips Portable DVD Player PET941D

Quick start guide

Charge your battery

This portable DVD player is designed with a built-in lithium battery to supply power to the player when you are on travel.

1 Slide the POWER switch to the OFF position

(charging of the DVD player only possible in the power-off mode).

Enjoy (Disc operation)

Enjoy (AV OUT)

Connecting additional equipment (TV for example)

1 Connect the AV OUT socket on the set to the

video and audio sockets on a TV as shown directly.

2 Switch on the TV and set to the correct video-

in channel. ➜ You can consult the owner's manual of your

TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)

2 Connect the supplied power adaptor cord (or

the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) to start charging.

➜ The CHR indicator turns red. ➜ When the battery is fully charged, the

indicator turns off.

3 Disconnect the power adaptor cord (or the

car adaptor) when the CHR indicator turns off.

Note:

– You can also connect the supplied power adaptor

cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible.

1 Open the lid of the player. 2 Slide the POWER switch to ON to switch on

the DVD player.

➜ The indicator turns on.

3 Slide OPEN2 on the player. 4 Remove the protective card (if any) and load a

disc with the label side facing up.

5 Close the disc door.

➜ Playback will start automatically. If not, press

2; .

6 To stop playback, press 9.

Note:

During play, you can: – Press OPTION to select some play options: audio,

subtitle, repeat, and time display.

– Press directly to adjust brightness of screen

backlight to match lighting conditions.

White

Yellow

PET941D_37_QSG_V1.0 WK0919

Red

Not supplied

AUDIO IN

VIDEO IN