Philips EasySense, EasySense SNS201, EasySense SNS200 User Manual

Sensors

EasySense

Fixture-Mount
for Advanced
Grouping

The Philips EasySense xture-mount sensor is the ideal solution for
per-xture control of new light xtures. It combines occupancy sensing,
daylight harvesting and task tuning in a single, compact package for easy
OEM xture assembly. EasySense operates with the established Philips
Advance Xitanium SR LED driver standard to make a simple two-wire
connection between sensor and driver, thus eliminating the need for
multiple components and auxiliary devices. The result is a cost-eective and
easy-to-design-in solution ideal for energy-savings and code-compliance
strategies. An intuitive app makes conguration and commissioning during
and after installation fast and easy using Philips eld apps.

EasySense with advanced grouping functionaility enables addition of
qualied wireless switches. Up to 40 sensors can be grouped to a switch
using Philips eld apps. In addition to easily adding user control to a
space, the grouping feature facilitates auto-o/manual-on and auto-o/
partial-on use cases. Furthermore, advanced grouping allows scene setting
(e.g., presentation mode for a conference room), as well as occupancy
sharing (i.e., xtures within a group can be programmed to remain at
prescribed light levels so long as occupancy is detected anywhere in
the group).

EasySense_ PLt-16199DS_ES A dv Grou ping DS_061818 06/18 page 1 of 12

EasySense for advanced grouping (SNS200) is also DLC qualied and listed
in the QPL for Networked Lighting Controls.

Commercial Product Name Order Code

EasySense Fixture-Mount Sensor SNS200

SNS201

EasySense xture-mount sensor

Features

• Occupancy sensing, daylight harvesting and
task tuning in one device

• Scene setting and occupancy sharing

• Compact size, 2-wire connec tion

• Operates with Philips Advance Xitanium SR
LED drivers and qualied wireless switches

• Conguration of sensor parameters–
if desired – using NFC or IR via intuitive
Android-based Philips eld apps

• DLC qualied: Listed on the QPL for
Networked Lighting Controls

Benets

• Combines funct ionality to reduce need for
multiple components

• Quick task tuning in the eld to optimize light
and power levels

• Enables auto-o/manual-on and auto-o/
partial-on application

• Cost-eect ive solution for energy-savings
and code-compliancy strategies

• 5-year limited system warrant y with Philips
Advance Xitanium LED drivers

• Congurat ion and commissioning from
the oor

1

Applications

• Conference rooms

• Individual oces

• Open oces

• Classrooms

• Storage and break areas

• Restrooms

• Lobbies

• Stairways

Product Data

All spec ications are typical and at 25°C Tcase unless otherwise specied.

Ordering Information

Order Code SNS200

Full Product Name EasySense Fixture-Mount Sensor

Carton Quantity 50 pcs/carton

Physical Information

Overall Dimensions 1.97in x 0.75in x 1.24in / 50mm x 19.0mm x 31.5mm

Housing (Luminaire Hole) 1.73in x 0.67in / 4 4mm x 17mm (l x w)

Net Weight per Piece 0.6oz / 17gr

Volume Required Inside Luminaire
(LxWxH)

Color White

Connectors WAGO 20160 2-pole terminal block rated for AWG24 to AWG18 solid or stranded wire

Electrical Information

Input Voltage Powered by SR driver low-voltage interface

Current Consumption 13mA

Nominal Power Consumption 200mW

Standby Power < 1 W on luminaire level, including driver standby power

Occupancy Sensing

Typ e Passive infrared (PIR)

Enable/Disable Default enabled

Occupancy Mode Auto-on/o, Manual-on/o, Manual-on/auto-o; Red LED indicates occupancy detected

Group Occupancy Sharing Enabled/disabled

Group Lighting Behavior Background level, task level

Eco-On Level 5 -10 0%

Hold Time 0.5 - 60 minutes

Viewing Angle X=72°, Y = 86° ( See detection pattern)

Background Light Level 0-100%

Prolong Time 0 minutes - innity

Grace Fading 0-25 seconds

Response Time/Fading to Switch On/O 0.7 seconds

1.87in x 0.75in x 0.95in / 50mm x 19mm x 24mm

Conti nued on n ext p age.

1. View limited warranty at http://www.usa.lighting.philips.com/support/support/warranty.

EasySense_ PLt-16199DS_ES A dv Grou ping DS_061818 06/18 page 2 of 12

EasySense xture-mount sensor

Product Data (continued)

All spec ications are typical and at 25°C Tcase unless otherwise specied.

Daylight Sensing

Enable/Disable Default enabled

Auto-Calibration Upon power-up

Viewing Angle 40° (half value sensitivity); 2% cut-o point at 75°

Task Tuning

Full Light Setting 5-100 %

Environment & Approbation

Operating Ambient Temperature Range 0°C to 55°C

Operating Humidity 0 – 95% non condensing

Storage Temperature -25°C to 85°C

Storage Humidity 0-95% non condensing

Max Case Temperature (Tcase) 55°C

Agency Approbations UL, CSA; FCC; Tested and approved for use in plenums

Certication California Title 20

Warranty 5 years

Digital Interface Xitanium SR

Other

Wireless Protocol Zigbee, IEEE 802.15.4

Encryption AES-12 8

LED Status Indicators Red, Yellow. Yellow LED on: Vacancy & Sensor is functional; Red LED on: Occupancy detected

No. Drivers per Sensor 4 max

Max Distance Switch-to-First-Fixture 33ft line-of-sight

Max Distance Fixture-to-Fixture 40ft line-of-sight

No. Switches per Group 5 max

Field Conguration via NFC or IR, parameters set via Philips eld apps

Compatible LED Drivers

Driver Model Number Description

XI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SR

XI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SR

Specications available at www.philips.com/xitaniumsr/na.

EasySense_ PLt-16199DS_ES A dv Grou ping DS_061818 06/18 page 3 of 12

EasySense xture-mount sensor

1.71 [43.5]

0

.

6

3

[

1

6

.

0

]

0.87 [22.0]

Mounting hole dimension (+/- 0.2mm)

0.96 [24.3] MAX

]

M

A

X

1.73 [44.0]

]

R0.09 [2.3]

Mounting hole dimension (+/- 0.2mm)

Sensor Dimensions (in./mm)

1.72 [43.8] MAX

1.97 [50.0] MAX

Mounting Dimensions (in./mm)

Accessory Mounting Ring

Part Number SMR-50 / Set of 50

• (1) SMR-50 includes a set of
(50) mounting rings

• Ordered separately, not included
with EasySense

• Dimensions: 53mm x 26mm x 1.5mm

X
A

M

]
.8

6
[1
6
.6

0

X
A

M

]
.0

9
1
[
5

.7
0

X
A
M
]
5

.
[7
0
.3

0

Mounting in U-shaped slot in sheet metal (max thickness 1 mm), tolerance +0.2mm/-0.0mm

1.71 [43.5]

]

0

.

6

1

[

.6

0

3

1.71 [43.5]

]

0

.

6

1

[

3

6

.

0

Accessory Mounting Bracket

Part Number SMB-50 / Set of 50

• (1) SMB-50 includes (50) mounting brackets

• Ordered separately, not included
with EasySense

• Dimensions: 64.1mm x 25.3mm x 10.3mm

EasySense_ PLt-16199DS_ES A dv Grou ping DS_061818 06/18 page 4 of 12

Mounting in cut-o ut in sheet matal (thickness 0.7 mm to 1.0 mm), tolerance +/-0.2mm

2.37 [60.0]

R0.09 [2.3]