Philips DVP6600 93, DVP6620 93, DVP6688 93 Quick Start Guide
Quick Start Guide
What’s in the box?
DVP6600, DVP6620, DVP6688
DVD Video Player
Connect
1
Composite Video CVBS
(Good Quality)
Power
OR
Component Video
(Better Quality)
Basic Audio/Video Connections
DVD Player (back)
COMPONENT VIDEO OUT
DVD Player (back)
DIGITAL OUT
COMPONENT VIDEO OUT
Composite
Video Cable
DIGITAL OUT
Video and Audio
Detachable stand
and 2 AAA batteries
x
Remote Control
TV (back)
COMPONENT
VIDEO IN
V (Pr/Cr)
U (Pb/Cb)
Y
DVD Video Player
Manual
TV (back)
VIDEO IN
(CVBS)
AUDIO IN
VIDEO IN
(CVBS)
AUDIO IN
User
Power
OR
HDMI
(Best Quality)
Power
Attach the Stand
A
B
Video
x
DVD Player (back)
COMPONENT VIDEO OUT
(Cable not supplied)
DIGITAL OUT
Audio
x
TV (back)
HDMI IN
Video and Audio
(Cable not supplied)
x
A Place this unit on a flat surface with the front panel
facing down.
Note To prevent this unit from being scratched,
always covers its front surface with a cloth before you
place it at on any surface.
B Place the stand on the rear panel and slide to the left to
lock into position.
dvp6600-20-88_93_qsg_eng_final811 1dvp6600-20-88_93_qsg_eng_final811 1 2008-03-24 2:39:18 PM2008-03-24 2:39:18 PM
2
STANDBY-ON
Disc Lock
OSD Language ENGLISH
Sleep
Lip Sync
Volume
DivX(R) VOD Code
General Setup Page
Set up
Enjoy
3
Finding the viewing channel
A
A Press 2 (STANDBY ON) on this unit to turn it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
you see the Video In channel.
Select the display language on the
B
button) until
°
screen
A Press SETUP.
The { General Setup Page } appears.
Start disc playback
A
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
STW X keys to navigate in the DVD menu.
B Press PLAY/PAUSE
to start playback.
C To stop playback, press
STOP Ç.
u
Troubleshooting
For more troubleshooting tips,
see the user manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the top panel of this
unit to turn on the power.
B Press T to select { OSD Language } and press X.
C Use ST keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this unit. Refer to
the user manual for more information.
Need help?
User Manual
See the user manual that came with your Philips DVD Player.
Online
Register your product and get support at www.philips.com/welcome.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Check audio connections and make sure that the
connected audio device is turned on.
• For HDMI connection, check if your TVs HDMI or
Digital setting is set to ON. Contact your TV
manufacturer for detailed information.
Remote control does not work
• Check the batteries are loaded correctly or replace
the batteries with new ones.
• Reduce the distance between the remote control
and this unit.
• Point the remote control directly toward the IR
sensor.
2008 © Koninklijke Philips N.V.
All rights reserved.
www.philips.com
sgpjy-0813/93_02
dvp6600-20-88_93_qsg_eng_final812 2dvp6600-20-88_93_qsg_eng_final812 2 2008-03-24 2:39:20 PM2008-03-24 2:39:20 PM
Loading...