![](/html/84/8450/84506e7cf226fd3ce5356b9f529382d23119732ae91f25f20449ba5648874b7d/bg1.png)
There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick-Use
Guide shows the easiest, most common connection.
Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or
picture if your TV and / or audio system is compatible.
REAR OF TV
(EXAMPLE ONLY)
ANTENNA IN
RF COAXIAL CABLE
OR
IN
OUT
CABLE BOX
CABLE TV SIGNAL
ANTENNA or
CABLE TV SIGNAL
1
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2
If you do have a Cable Box (or Satellite Receiver), first connect the Cable TV (or Satellite) signal to the IN
jack on the Cable Box/Satellite Receiver. Then, use an RF coaxial cable (like the one supplied) to connect
the OUT jack of the Cable Box/Satellite Receiver to the ANT-IN jack on the DVD / VCR.
If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT-IN jack
on the rear of the DVD / VCR.
3
Connect the supplied black RF coaxial cable to the DVD / VCR’s ANT-OUT jack and to your TV’s ANTENNA
IN jack. The TV’s ANTENNA IN jack may be labelled 75-ohm,TV IN, or RF IN. Check your TV manual for details.
4
Plug the power cords of the DVD/VCR and the TV into an active power outlet.
5
Turn on the TV power. Set the TV to channel 3. (If you cannot use channel 3 at your TV, you can use channel 4
instead. However, you must set the DVD/VCR’s output channel to 4. See the accompanying DVD/VCR owner’s manual
for details.)
6
Press the STANDBY-ON 2 button on the DVD / VCR or its remote to turn on the DVD/VCR. The first
time you turn on the DVD/ VCR, you should complete the VCR setup. See the other side of this QuickUse Guide for details.
DVP620VR/07 QUGNew 31/03/2004 05:24 PM Page 1
DVP620VR
-
-
![](/html/84/8450/84506e7cf226fd3ce5356b9f529382d23119732ae91f25f20449ba5648874b7d/bg2.png)
STANDBY-ON
SOURCE
POWER ON
VIDEO AUDIO REW F.FWD PLAY
RECORD CHANNEL
VCR
OPEN/CLOSE
DVD
STOP PLA
Y
ONE TOUCH RECORDING • LONG PLAY
STOP/EJECT
LR
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
8
9
0
+10
Quick-Use Guide (cont’d)
Quick-Use Guide (cont’d)
Playing a Disc
1
With the TV and DVD/VCR on, press the DVD
button to put the DVD / VCR in the DVD mode.
2
Press OPEN/CLOSE / to open the disc tray.
Put a Disc in the tray with the label facing up and the shiny side
facing down.
Press OPEN/CLOSE / again to close the disc tray.
3
Playback may start automatically. If not, press PLAY B.
If a DVD Disc menu appears, use the 1, 2, 3,4 or Number
buttons to select features or start playback. Follow the
instructions in the menu.
4
To stop playing a Disc, press STOP 9.
Setting Up the VCR the First Time
1
Turn on the TV and set it to channel 3.
2
Press VCR, then press STANDBY-ON 2. The VCR light will
appear on the front of the DVD/VCR. The display shown below
will appear.
3
Press 3 or 4 to select English, French, or Spanish as the
language for VCR displays. Then, press 2.
4
The AUTO SET UP message will appear. Press 2 to set up TV
channels for the VCR. When set up is complete, the lowest
TV channel will appear on the TV.
AUTO SET UP
PUSH
2
LANGUAGE SELECT
2 ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH
2
Playable Discs
The DVD Player of the DVD/ VCR will play the following Discs.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC or PAL Color System.
Turn on the TV
to channel 3.
3-4
2
1
2
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
4
3
1
DVD Mode
Before using the remote
control for DVD features,
press the DVD button on the
remote. The DVD/VCR must
be in DVD mode.
The DVD light will appear on
the front of the DVD/ VCR.
DVP620VR/07 QUGNew 31/03/2004 05:24 PM Page 2
Recordable
ritable
ReW