Philips DVP5990K User Manual

DVP5990K

DVD Video Player

Quick Start Guide

What’s in the box?

DVD Video Player

Remote Control

and 2 AAA batteries

User

Manual

Composite

Audio/Video Cables

Basic Audio/Video Connections

Audio and Video



Power

Component Video

(Better Quality)

HDMI

(Best Quality)

Composite Video CVBS

(Good Quality)

(Cable not supplied)

Video



Power

Audio



DVD Player (back)

Audio and Video



Power

(Cable not supplied)

DVD Player (back)

Connect

Power Cable

VIDEO IN (CVBS)

VIDEO IN

(CVBS)

V (Pr/Cr)

U (Pb/Cb)

COMPONENT

VIDEO IN

HDMI IN

TV (back)

dvp5990k_98_qsg_eng.indd 1 2008-08-11 11:11:14 AM

Enjoy

Set up

A

Finding the viewing channel

A Press

on this unit to turn it on.

B Turn on the TV. Use the TVs remote control to

select the correct viewing channel.

Note To search for the correct viewing channel,

press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel.

B

Select the display language on the

screen

A Press SETUP.

The { General Setup Page } appears.

Disc Lock

OSD Language Auto (ENG)

Sleep ENGLISH

Lip Sync

Volume

Auto Standby

DivX(R) VOD Code

General Setup Page

Melayu

B Use  keys to select { OSD Language } and press

.

C Use  keys to select a language and press OK to

confirm. (For Philips ‘EasyLink’ TV, { Auto } must be selected.)

D Press SETUP to exit.

Note The language set here is only for the menus

that are shown on the TV while operating this unit, not for the DVD disc menu.

There are various setup options (Audio Setup, Video Setup, Preference) available on this unit. Refer to the user manual for more information.

A

Start disc playback

A Playback may start automatically when a disc has

been loaded in the disc tray.

Note If a disc menu appears on the TV, use

  keys to navigate in the DVD menu.

B Press

to start playback.

C To stop playback, press

Troubleshooting

For more troubleshooting tips, see the user manual.

No power

• Check if the AC power cord is properly connected.

• Press 1 on the front panel of this unit to turn on the

power.

No picture

• Check connection to TV and ensure the cables are rmly in place.

No sound or distorted sound

• Check audio connections and make sure that the connected audio device is turned on.

• For HDMI connection, check if your TVs HDMI or Digital setting is set to ON. Contact your TV manufacturer for detailed information.

Remote control does not work

• Check the batteries are loaded correctly or replace the batteries with new ones.

• Reduce the distance between the remote control and this unit.

• Point the remote control directly toward the IR sensor.

Need help?

User Manual

See the user manual that came with your Philips DVD Player.

Online

www.philips.com sgptt-0833/98_03

dvp5990k_98_qsg_eng.indd 2 2008-08-11 11:11:16 AM